The ThinkGrow Model One LED System 4ft Inner Canopy LED Bar with built-in 120 Watt Driver, will revolutionize high-density indoor growing. When applying light to plants only from above the plants, leaves and sections of the plant below the top “canopy” of the plant suffer from low light levels. That is the exact problem the ICL-300 is designed to fix. The ICL-300 emits light in a 300 degree pattern so that when positioned below the canopy, the sections of the plant under the canopy can also get the light they need to produce higher quality and yields. By applying some light to the middle of the plant structure, the user can eliminate lower quality flower formation and replace it with healthy flowers. The modular design of the ICL-300 allows them to be used in all installations regardless of the shape or size of the growing area. When light is only applied from overhead lighting fixtures, it is often the case that the light does not reach the bottom of the canopy, leaving a lot of gains on the table. This is where the ICL-300 steps in and solves the problem. Equipped with a built-in driver and LED diodes covering 3 sides, the ICL-300 emits light in a 300-degree direction. When placed within the canopy, the lower sections of the plants can absorb light directly from the LED and can receive the much needed light they need to produce higher quality and quantity of yields. Additionally, by applying light to the middle of the plant structure, the user can eliminate lower-quality flower formation and replace it with healthy flowers. The modular design of the ICL-300 allows them to be used in all installations regardless of the shape or size of the growing area. Optional, not included: The ThinkGrow TSD-1 LED Stand was specifically designed to be used with the ICL-300. With the use of the TSD-1, growers can easily place their ICL-300 lights within the canopy, as well as easily adjust the height of the lights. Additionally, this stand facilitates the task of daisy-chaining multiple ICL-300 grow lights. Two are required for every ICL-300. Thinkgrow ICL-300 Tech-Sheet Download Thinkgrow ICL-300 Install Guide Download Thinkgrow LMA-G tech sheet (required) Thinkgrow LMA-T tech sheet (required) Don’t forget to buy: power cord (for the voltage you are using) daisy chain connections (sold in different lengths). Spec sheet downoad for daisy chain and power cords

ThinkGrow ICL-150 Multi-purpose Canopy LED Bar is a versatile and efficient solution for indoor plant growth. With the ICL-150 inner canopy LED grow light, plants receive optimal lighting for maximum growth and yield. Allows for four light spectrum settings.  Its compact design and advanced technology make it a must-have for any indoor garden. Designed for improved yield, positioned within a plant canopy to address the limitations of traditional overhead lighting. By delivering light directly to the middle and lower sections of plants, these LEDs ensure that areas typically shaded by the upper canopy receive the essential illumination needed for optimal photosynthesis. This approach focuses on improving light distribution rather than merely increasing the power output from the top light to penetrate the canopy top. It's an optimal solution for balancing energy efficiency and yield ThinkGrow offers a range of Inner Canopy LEDs, including the ICL-300, ICL-150, and ICL-120. These fixtures providing versatile, modular solutions that adapt to various cultivation setups for enhanced light distribution and crop performance. Specifications: Power: 120 W LED Grow Light Light Angle: 150 degrees Spectrum Channels: 4 Channels Mounting Options: Top, Side, or Under Canopy Application: Inner/Under Canopy Supplemental Lighting Design Focus: Improved light distribution for shaded mid/lower canopy areas Energy Efficiency: Optimized for balance of coverage and yield  

The ThinkGrow ICL-120 Under Canopy LED Bar is a purpose-built lighting solution designed to enhance photosynthesis in the lower canopy zones of dense plant growth. By delivering light directly to the shaded undersides of plants, the ICL-120 ensures balanced illumination throughout the canopy for consistent growth and improved yield.   Its slim, efficient design allows for easy integration into any cultivation setup. Positioned beneath the canopy, this LED bar maximizes usable light where it’s needed most — improving coverage without excessive energy use.   Engineered for uniform light distribution rather than higher wattage output from above, the ICL-120 represents an optimal solution for balancing efficiency, intensity, and yield potential.   ThinkGrow’s Inner Canopy LED line — including the ICL-300, ICL-150, and ICL-120 — provides modular, adaptable solutions that optimize light delivery and crop performance across diverse cultivation systems. Specifications: Power: 120 W LED Grow Light Light Angle: 120 degrees Spectrum Channels: Single Spectrum Channel Mounting Options: Under Canopy Application Application: Lower Canopy Supplemental Lighting Design Focus: Uniform illumination in shaded lower canopy regions Energy Efficiency: Engineered for balanced coverage and maximum yield return  

The ThinkGrow TSD-2 LED Stands offers sturdy, adjustable support for the ICL-120 and ICL-150 LED Bars. Sold as a convenient two-pack, these stands are designed for flexible mounting in under-canopy or side-lighting configurations. Engineered for strength, portability, and quick installation, the TSD-2 enhances versatility across any cultivation environment. Specifications: Compatibility: ICL-120 and ICL-150 LED Bars Mounting Type: Dual freestanding LED bar supports (2 per pack) Material: Lightweight, durable construction Design Purpose: Adjustable positioning for precise canopy lighting Power: Passive accessory (non-electrical) Dimensions: Sized for ICL-120/150 light form factor

The ThinkGrow TSD-1 LED Stand provides secure and stable support for the ICL-300 Inner Canopy LED Bar. Designed for professional indoor cultivation setups, the stand ensures precise light positioning within the canopy, maximizing coverage and uniformity. Its durable build and easy assembly make it an ideal accessory for commercial growers and high-performance home installations alike. Specifications: Compatibility: ICL-300 Inner Canopy LED Bar Mounting Type: Freestanding LED bar support Material: Durable, lightweight construction Design Purpose: Stable under-canopy placement and consistent light distribution Power: Passive accessory (non-electrical) Dimensions: Standard fit for ICL-300 length and diameter This stand is designed to be used with the ICL-300. It can be used to adjust the height and for placing the ICL-300 within the canopy.

TDC-120 power cord with NEMA 5-15 plug is a 7ft split power cord for the new Model-One System and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers or ICL-300 must be connected to power using one of the TDC-1 cables, or one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-120 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

The TDC-3 Daisy Chain Power Cord is specially designed for the new Model-One or IVL-300 inter-canopy LED System to interconnect between the LED drivers. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.  

This Daisy Chain Cord is specially designed for the new Model-One System and ICL-300 inter canopy LED to interconnect between the LED drivers or bars.  Also required is one TDC-1 splitter power/daisy chain cord to start the chain and connect to power.  The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

The TDC-1 splitter + power cord is specially designed for the new Model-One or ICL-300 System and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

the TDC-2 is a 12” daisy chain connector for Model One or ICL-300.  It requires one TDC-1 splitter power cord (to connect to power and the first LED bar or driver). And is specially designed for the new Model-One System and ICL-300 inter-canopy LEDs, and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.