The TDC-240 splitter power cord with NEMA 6-15 plug is a 7ft split power cord for the new Model-One System or ICL-309 inter canopy LED and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. The TDC-240 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

TDC-120 power cord with NEMA 5-15 plug is a 7ft split power cord for the new Model-One System and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers or ICL-300 must be connected to power using one of the TDC-1 cables, or one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-120 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

The TDC-3 Daisy Chain Power Cord is specially designed for the new Model-One or IVL-300 inter-canopy LED System to interconnect between the LED drivers. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.  

The Full Spectrum Quantum Sensor (MBS-PAR) provides accurate and cost-effective measurement of photosynthetically active radiation (PAR) from all light sources used to grow plants. The full-spectrum quantum sensor has a spectral range of 389 to 692 nm ± 5 nm. The improved spectral response increases the accuracy of LED measurements. Used in conjunction with the Hydro-X controller, the PPFD sensor will AUTOMATICALLY increase or decrease the output level of your supplemental lighting systems to continuously maintain the exact lighting level (in PPFD) that the user selects.

TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.  The LMA-T works specifically with the ThinkGrow LED systems to provide two channel control, which allows separate control for full spectrum and second red output levels on the ThinkGrow LEDs. The LMA-T simply connects to the lighting control ports Line 1 and Line 2 on the HCS-1. Once connected, the user can then set individual ON and OFF times and the dimming settings for the full spectrum LEDs and also for the second red LEDs. The LMA-T then is connected to the RJ type lighting control cables where each of the LEDs are connected back to the controller in a daisy-chain configuration using plug-and-play connections. One adaptor could run up to 256 ThinkGrow LEDs.   1x LMA-T   1x RJ12 to customized waterproof connecter  * Convert RJ12 to Water Proof Connector Cable included.

Introducing the SpotOn® Pocket Soil Moisture Meter We are excited to unveil the SpotOn Pocket Soil Moisture Meter, an innovative device designed for greenhouse growers and potted plant enthusiasts. This advanced tool delivers quick and accurate readings of soil moisture, pore and bulk electrical conductivity (EC), and temperature, ensuring optimal plant health and growth. With seamless Bluetooth connectivity to the SpotView Mobile App (available on Google Play and the Apple Store), monitoring your plants has never been easier. Why Choose the SpotOn® Pocket Soil Moisture Meter? Quick & Accurate Readings: This state-of-the-art meter provides precise measurements of soil moisture, pore and bulk EC, and temperature, helping you maintain ideal growing conditions effortlessly. Versatile Applications: Perfect for both mineral and soilless media, the SpotOn® Pocket Soil Moisture Meter is suitable for a wide range of plants and growing environments, particularly professional greenhouses. Compact Design: True to its name, this pocket-sized meter is compact and lightweight, making it easy to transport and ideal for taking measurements across multiple locations. Durable Construction: Featuring 2.75” rubber-mounted sensor rods that resist bending and an ultra-high-frequency (100 MHz) measuring circuit, this meter ensures accurate moisture readings in various soil types and salinity levels. Bluetooth® Connectivity: Connect seamlessly to the SpotView™ App via Bluetooth® to view real-time data, access past recordings, and share data in .csv format. Experience the Benefits: Optimize Water Usage: Get precise readings to help you use water efficiently, ensuring your plants receive just the right amount of moisture. Enhance Plant Health: Monitor and maintain optimal growing conditions to support healthy, thriving plants. Increase Yield: Accurate measurements and real-time data allow you to make informed decisions that can enhance your overall yield. Order Yours Today Elevate your plant-growing experience with the SpotOn® Pocket Soil Moisture Meter. Order yours today and take the first step toward healthier, more productive plants. Product Spec Sheet Download Product Manual Download Range: Volumetric Water Content: 0.0 - 100.0% m3/m3Electrical Conductivity: 0.0 - 5.00 mS/cm Bulk (dS/m) Temperature: 16°F(-9°C) - 120°F(49°C)   Accuracy: Volumetric Water Content: +/- 3% Electrical Conductivity: +/- 0.1 mS/cmTemperature:  +/- 1°F(0.6°C) Repeatability: Less Than 0.5% variation: VWC, EC, Temp Environmental:  32 - 122°F (0-50°C) Operating RangeIP-64 Rated (Rain and Dust Proof) Battery: (2) AA/LR6 Alkaline Batteries (included) 300 Hrs Continuous On-time Battery Life Meter Automatically Turns Off After 20 Minutes OfInactivity Dimensions:  As Shipped: 4.5”(11.4cm)W x 8.5”(11.4cm)D x3.5”(93cm)L 3.3lb(1.5kg)

the TDC-2 is a 12” daisy chain connector for Model One or ICL-300.  It requires one TDC-1 splitter power cord (to connect to power and the first LED bar or driver). And is specially designed for the new Model-One System and ICL-300 inter-canopy LEDs, and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

The TDC-1 splitter + power cord is specially designed for the new Model-One or ICL-300 System and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

Built for professionals who won’t take chances growing.  Our premium bags are crafted with advanced technology for increased durability. Expertly designed after extensive mycologist input. Unmatched thickness and size.  Prevents contamination Supports heavy-duty use Reusable  Ideal for professional mycologists Our top-quality Ace Of Spades Premium Myco Grow Bags were made for discerning mycologists. Avoid contamination using Ace's and ensure successful sterilization with our reliable bags.   Built To Perform Our design specifications called for heaviest duty premium grade 8mil polypropylene material. 8mil heaviest duty PP prevents accidental breakage.    Contamination Control The filter includes a finer nylon mesh that improves airflow and particle filtration, especially from airborne molds. Refined poly mesh .2 micron filter stops all airborne contams in their tracks.    Commercial Size Ours come in a standard size of 8' x 5' x 20' x 8mil and have neatly trimmed and upgraded welded seams for rugged structural integrity. Large 10 gallon capacity for commercial production. Heaviest duty welds won’t fail even if dropped or while being sterilized.  Suitable for various mushroom cultivation purposes, our bags have a thicker PP gauge and increased load-bearing capacity, stand up to higher temperatures, pressures and won't fail during sterilization.  Compare our quality to theirs Their bag failed over time. Weak 6mil PP fractured at the injection site. And grew over time.    Don’t take risks. Choose Ace Of Spades.  Designed and built by Forever Green Indoors for Mycologists who need ruggedly built dependable mushroom grow tech. Specifications  Max pressure: 10-25 PSI pressure (1.5-2 kg/cm²) Max temp: 262°F (128°C) Filter: 0.2-micron PP: 8 mil  Pre-sterilized 

The optional Water Detector WD-2  allows the user to detect water leaks or water on the floor of the facility. Simply place the water sensor at floor level (or wherever you want to watch out for water leaks). Up to 5 Water detectors can be connected to a single Hydro-x controller. If ANY of the sensor detects a water leak, the unit will send a user-alert to notify user of a water leak.

TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.  The LMA-T works specifically with the ThinkGrow LED systems to provide two channel control, which allows separate control for full spectrum and second red output levels on the ThinkGrow LEDs.  The LMA-T simply connects to the lighting control ports Line 1 and Line 2 on the HCS-1. Once connected, the user can then set individual ON and OFF times and the dimming settings for the full spectrum LEDs and also for the second red LEDs. The LMA-T then is connected to the RJ type lighting control cables where each of the LEDs are connected back to the controller in a daisy-chain configuration using plug-and-play connections. One adaptor could run up to 256 ThinkGrow LEDs.    * Convert RJ12 to Water Proof Connector Cable included.

The ThinkGrow ICL-120 Under Canopy LED Bar is a purpose-built lighting solution designed to enhance photosynthesis in the lower canopy zones of dense plant growth. By delivering light directly to the shaded undersides of plants, the ICL-120 ensures balanced illumination throughout the canopy for consistent growth and improved yield. Its slim, efficient design allows for easy integration into any cultivation setup. Positioned beneath the canopy, this LED bar maximizes usable light where it’s needed most — improving coverage without excessive energy use. Engineered for uniform light distribution rather than higher wattage output from above, the ICL-120 represents an optimal solution for balancing efficiency, intensity, and yield potential. ThinkGrow’s Inner Canopy LED line — including the ICL-300, ICL-150, and ICL-120 — provides modular, adaptable solutions that optimize light delivery and crop performance across diverse cultivation systems. Specifications: Power: 120 W LED Grow Light Light Angle: 120 degrees Spectrum Channels: Single Spectrum Channel Mounting Options: Under Canopy Application Application: Lower Canopy Supplemental Lighting Design Focus: Uniform illumination in shaded lower canopy regions Energy Efficiency: Engineered for balanced coverage and maximum yield return Includes 4 ICL-120 LEDs, with 8" daisy chain connection built in.  Power cords, daisy chain cable options and stands are available at additional cost. Shop our TDC cables and TSD stands for your needs. Or talk with us on our Chat and we can configure for you.  

(May be delayed in shipping, connect with us on our chat to confirm dates) ThinkGrow ICL-150 Multi-purpose Canopy LED Bar is a versatile and efficient solution for indoor plant growth. With the ICL-150 inner canopy LED grow light, plants receive optimal lighting for maximum growth and yield. Allows for four light spectrum settings.  Its compact design and advanced technology make it a must-have for any indoor garden. Designed for improved yield, positioned within a plant canopy to address the limitations of traditional overhead lighting. By delivering light directly to the middle and lower sections of plants, these LEDs ensure that areas typically shaded by the upper canopy receive the essential illumination needed for optimal photosynthesis. This approach focuses on improving light distribution rather than merely increasing the power output from the top light to penetrate the canopy top. It's an optimal solution for balancing energy efficiency and yield ThinkGrow offers a range of Inner Canopy LEDs, including the ICL-300, ICL-150, and ICL-120. These fixtures providing versatile, modular solutions that adapt to various cultivation setups for enhanced light distribution and crop performance. Specifications: Power: 120 W LED Grow Light Light Angle: 150 degrees Spectrum Channels: 4 Channels Mounting Options: Top, Side, or Under Canopy Application: Inner/Under Canopy Supplemental Lighting Design Focus: Improved light distribution for shaded mid/lower canopy areas Energy Efficiency: Optimized for balance of coverage and yield Power cords, daisy chain cable options and stands are available at additional cost. Shop our TDC cables and TSD stands for your needs. Or talk with us on our Chat and we can configure for you.  

Professional Grade Commercial LED Grow Light.  Pricing displayed is for pallet/bulk pricing.  This unit can be 100% paid for by many local utilities energy conservation programs. Use our chat system to connect with our owner. An expert on lighting layouts and rebates for indoor growing. DLC listed.  2026 next generation model! Just arrived.  Our second generation CTB-6 is designed with commercial grow operations in mind. We’ve installed thousands of grow rooms and learned from each one. Our V2 design is lighter, easier to hang and install, more powerful and is plug and play ready right out of the box with built in 240V plug and hanging hardware.  One person can easily hang and install in less than 2 minutes.  It uses an Integrated Driver-on-Board (DOB) architecture: Power conversion happens inside each bar. No external driver boxes. No drivers to fail.  Lightweight & compact: Driver circuits are embedded — no heavy external housing. Zero assembly: Unfold, hang, plug — skip driver mounting or wiring steps. Cooler canopy: Minimizes internal heat — less burden on HVAC. Cleaner layout: One main cable per fixture — no clutter. Safety sealed: Each diode is lens-encapsulated to meet ETL/UL moisture and shock isolation requirements. The lens are UV optimized and won’t cloud over time.  Power Input:  Commercial grade 210-277V AC power input. (Important: No 110V power option on this unit) Why Growers Choose CTB-6  The CTB-6 is engineered for commercial success. You get: 🔧 Fast Install No driver boxes. No assembly. Unfold, hang, and plug in — save on labor in high-cost builds. ⚖️ Lightweight Design Driver-on-board build sheds ballast bulk. The fixture is lean, easy to lift, handle, and hang. ❄️ Lower Heat Load With no large external driver producing heat in the grow zone, your HVAC sees less burden. 🛡️ Safety & Compliance Each diode is lens-encapsulated to meet UL/ETL requirements. Fully sealed against moisture & shock. ✅ Proven Performance 1864 µmol/s at 2.6 µmol/J. ETL + DLC listed. 5-year warranty backs it.   The reviews are starting to come in: “Installed 20 CTB-6s in a vertical farm — the uniformity and plug-and-go ease sold me.” — Grow Ops Manager, WA Take Control of Your ROI Ask us how we bundle rebate support, installation services, and volume pricing to shorten payback. Rebate-Qualified Efficiency The CTB-6 Bar LED is fully DLC-listed, meeting the performance and verification standards required by U.S. and Canadian utility rebate programs.This certification confirms high energy efficiency and long-term reliability—criteria utilities demand before approving incentive payouts. Built for Energy-Savings Programs Because the CTB-6 operates at 2.6 µmol/J with integrated driver-on-board technology, it qualifies for lighting rebate programs in most regions.That means commercial growers can offset purchase costs through local and regional energy-efficiency incentives, often recovering 20–40 % of fixture costs within weeks of installation. Our Leading Fixture for Rebated Projects Forever Green Indoors positions the CTB-6 as its flagship commercial fixture for rebate-driven upgrades.Its combination of DLC 4.0 approval, ETL safety certification, and plug-and-grow simplicity makes it the preferred choice for licensed facilities seeking both compliance and ROI. Fast-Track Your Incentive Our rebate specialists handle the entire process—from pre-approval paperwork to post-installation verification—so you capture every dollar your utility offers. Get Rebate Support  Core Specs PPF 1864 µmol/s Efficacy 2.58 µmol/J Input Power 722 W Input Voltage 120–277 Vac  NEMA 6-15P w/ NEMA 5-15P Adapter Dimensions / Weight 45.6" × 43.3" × 1.5" / 20 lb DLC Listing Number CTB6-1800X-ID Operating Temp −40 to 104°F Warranty 5 Years Spectrally Tunable No Dimmable Yes Dimming and Control Method 0-10V IEC60929 Annex E, 0-10V ANSI C137.1 (8V), 0-10V ANSI C137.1 (9V), 0-10V Other Protocol, No Integral Control Capability Dim to Off Connector or Transmission Hardware RJ-12, No Fan Presence No Model Reference Number: H-V34FX3

LMA-G is specially designed to be used with ThinkGrow Model-I and I Plus. The LMA-G needs to be connected with a lighting control adaptor to offer a group control function to the grow lights. Each LMA-G can control one group of lights./ Each light group requires one LMA-G. TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.  Designed for ThinkGrow Single-bar LED fixtures. LMA-G Technical Sheet Dowload

The BM-1 weatherproof box is designed for the protection for TrolMaster TS-1/2, HS-1 and ARS-1 controllers from dripping water and low-pressure sprayed water. 

The optional Water Detector WD-2  allows the user to detect water leaks or water on the floor of the facility. Simply place the water sensor at floor level (or wherever you want to watch out for water leaks). Up to 5 Water detectors can be connected to a single Hydro-x controller. If ANY of the sensor detects a water leak, the unit will send a user-alert to notify user of a water leak.

The ThinkGrow TSD-1 LED Stand provides secure and stable support for the ICL Under Canopy LED Bars. Designed for professional indoor cultivation setups, the stand ensures precise light positioning within the canopy, maximizing coverage and uniformity. Its durable build and easy assembly make it an ideal accessory for commercial growers and high-performance home installations alike. Specifications: Compatibility: ICL Under Canopy LED Bars Mounting Type: Freestanding LED bar support Material: Durable, lightweight construction Design Purpose: Stable under-canopy placement and consistent light distribution Power: Passive accessory (non-electrical) Dimensions: Standard fit for ICL-300 length and diameter This stand is designed to be used with the ICL-300. It can be used to adjust the height and for placing the ICL-300 within the canopy.

This Daisy Chain Cord is specially designed for the new Model-One System and ICL-300 inter canopy LED to interconnect between the LED drivers or bars.  Also required is one TDC-1 splitter power/daisy chain cord to start the chain and connect to power.  The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

The ThinkGrow Model One LED System 4ft Inner Canopy LED Bar with built-in 120 Watt Driver, will revolutionize high-density indoor growing. When applying light to plants only from above the plants, leaves and sections of the plant below the top “canopy” of the plant suffer from low light levels. That is the exact problem the ICL-300 is designed to fix. The ICL-300 emits light in a 300 degree pattern so that when positioned below the canopy, the sections of the plant under the canopy can also get the light they need to produce higher quality and yields. By applying some light to the middle of the plant structure, the user can eliminate lower quality flower formation and replace it with healthy flowers. The modular design of the ICL-300 allows them to be used in all installations regardless of the shape or size of the growing area. When light is only applied from overhead lighting fixtures, it is often the case that the light does not reach the bottom of the canopy, leaving a lot of gains on the table. This is where the ICL-300 steps in and solves the problem. Equipped with a built-in driver and LED diodes covering 3 sides, the ICL-300 emits light in a 300-degree direction. When placed within the canopy, the lower sections of the plants can absorb light directly from the LED and can receive the much needed light they need to produce higher quality and quantity of yields. Additionally, by applying light to the middle of the plant structure, the user can eliminate lower-quality flower formation and replace it with healthy flowers. The modular design of the ICL-300 allows them to be used in all installations regardless of the shape or size of the growing area. Optional, not included: The ThinkGrow TSD-3 LED Stand was specifically designed to be used with the ICL-300. With the use of the TSD-1 or 3 growers can easily place their ICL-300 lights within the canopy, as well as easily adjust the height of the lights. Additionally, this stand facilitates the task of daisy-chaining multiple ICL-300 grow lights. Two are required for every ICL-300. Thinkgrow ICL-300 Tech-Sheet Download Thinkgrow ICL-300 Install Guide Download Thinkgrow LMA-G tech sheet Thinkgrow LMA-T tech sheet  Power cords, daisy chain cable options and stands are available at additional cost. Shop our TDC cables and TSD stands for your needs. Or talk with us on our Chat and we can configure for you.         Spec sheet downoad for daisy chain and power cords

The DEA-10/12/14 is a 3' long AWG#10/12/14 Daisy-chain Extension Power Cord for all ThinkGrow LEDs, designed to extend the length of the Daisy-chain power cord, to satisfy a variety of applications. Depending on the power source of your facility, using the daisy-chain power cables can provide power to multiple lighting fixtures. The DEA-10L is a 10’ Daisy-Chain Extension Power Cord to extend the power cord cable to interconnect between LED drivers to reduce power outlets and infrastructure costs.

The DCA-10/12/14 is a 5' long AWG#10/12/14 daisy-chain power cord for all ThinkGrow LEDs, designed to interconnect LED drivers, the system can eliminate a massive amount of power outlets, and reduce the number of power cables required. Depending on the power source of your facility, using the daisy-chain power cables can provide power to multiple lighting fixtures.

The ThinkGrow Model I-Plus LED fixture is a high-performance grow light designed specifically for horticulture cultivation. The compact design, featuring a built-in driver, ensures a balance between energy efficiency and an optimal human work environment. The innovative V-shape design on the LED panel enhances light distribution, allowing for a reduced height from the canopy, which in turn minimizes light energy loss. Benefits of Light Intensity This LED grow light offers outstanding efficiency with a light intensity of 2.7 µmol/J, ensuring that your plants receive the maximum amount of usable light energy per unit of electricity consumed. High light intensity promotes vigorous plant growth, enhances photosynthesis, and increases yields. This efficiency translates into lower energy costs, making it an economical choice for both commercial and home growers. Benefits of the Color Spectrum The fixture features four fully controllable spectrum channels—UV, White, Deep Red, and Far Red—providing the flexibility to dial in the exact light recipe your plants need. UV (Ultraviolet): UV light stimulates the production of essential oils and resins, enhancing the flavor, aroma, and overall quality of your crops. It also helps in controlling mold and mildew, ensuring healthier plants. White Light: Mimicking natural sunlight, white light supports all stages of plant growth, from seedling to flowering. It provides a balanced spectrum that enhances overall plant health and growth. Deep Red: Deep red light is crucial for the flowering and fruiting stages of plant development. It promotes the production of flowers and fruits, leading to higher yields and better-quality produce. Far Red: Far red light influences plant morphology, encouraging stem elongation and leaf expansion. This spectrum is essential for optimizing canopy penetration, ensuring that light reaches the lower parts of the plants, promoting uniform growth. With the TrolMaster HCS-2/3 controller, you can fully control these spectrum channels, tailoring the light to the specific needs of your plants at different growth stages. The external control capability allows for the management of up to 256 fixtures per channel, making it a versatile solution for large-scale operations. In summary, this high-performance LED grow light not only maximizes energy efficiency but also enhances plant growth through its innovative design and spectrum flexibility, ensuring your plants receive the precise light they need for optimal growth and yields. Spec Sheet Download

ThinkGrow Model-I LED Grow Light: Optimized for Greenhouse and Indoor Cultivation The ThinkGrow Model-I is a high-performance LED grow light designed specifically for greenhouse and single-level indoor horticultural cultivation. This fixture integrates cutting-edge features to enhance energy efficiency, light distribution, and overall plant growth. Key Features and Benefits Compact and Efficient Design: Built-in Driver: Ensures energy efficiency while maintaining a balanced work environment for growers. Innovative V-Shape Design: Improves light distribution, reducing the height needed from the canopy and minimizing light energy loss. Full Spectrum and UV Light: Natural Sunlight Mimicry: The full-spectrum design with UV provides a light quality similar to natural sunlight, covering all critical growth phases from vegetative to flowering. Enhanced Far Red Spectrum: Far Red Channel. Offers an additional Far Red spectrum channel, allowing a 10-15 minute exposure to accelerate the flowering cycle (External Controller required). Efficiency: Outstanding efficiency at 2.54 umol/J, ensuring optimal light utilization.Advanced Control Capabilities: External Control: Allows up to 256 fixtures per channel, providing extensive control options for large-scale operations. Compatibility: Designed to work seamlessly with TrolMaster Hydro-X control systems. Independent Channel Control: Using the TrolMaster lighting adaptor LMA-T, the Full Spectrum and Far Red channels can be independently controlled. This feature enables the Far Red channel to be activated 10-15 minutes after lights-off, expediting the flowering process. Application and Use Greenhouse Cultivation: Ideal for use in greenhouses, where efficient light distribution and control are crucial. Single-Level Indoor Cultivation: Perfect for indoor grow setups, providing a balanced light environment that supports all stages of plant growth. Conclusion The ThinkGrow Model-I LED Grow Light is a state-of-the-art solution for professional horticultural cultivation. Its compact, efficient design, combined with advanced light spectrum control and compatibility with TrolMaster systems, makes it an ideal choice for both greenhouse and indoor applications. Achieve optimal plant growth and accelerated flowering with the Model-I’s superior technology and performance. Spec Sheet Download

Our premium bags are crafted with advanced technology for increased durability. Expertly designed after extensive mycologist input. Unmatched thickness and size. Includes double wall injection port.  Our top-quality Ace Of Spades Premium Myco Grow Bags were made for discerning mycologists. Avoid contamination using Ace's and ensure successful sterilization with our reliable bags. Our design specifications called for heavier duty premium grade polypropylene material. The filter includes a finer nylon mesh that improves airflow and particle filtration, especially from airborne molds. We also upgraded our self healing injection port by welding another PP wall making it fully encapsulated.  Ours come in a standard size of 8' x 5' x 20' x 8mil and have neatly trimmed and upgraded welded seams for rugged structural integrity. Suitable for various mushroom cultivation purposes, our bags have a thicker PP gauge and increased load-bearing capacity, stand up to higher temperatures, pressures and won't fail during sterilization.  Designed and built by Forever Green Indoors for Mycologists who need ruggedly built dependable mushroom grow tech.  Featuring:  Advanced Air Exchange Design: These bags have a 0.2-micron filter patch, allowing for proper air exchange and preventing contamination, promoting ideal conditions for mushroom growth. Upgraded inoculation port : Our grow bags have a double walled self-healing injection port for easy inoculation with spores or liquid culture using a syringe. Just add your preferred liquid culture and you're ready to grow. Compare our port to most bags on the market without double wall protection, typically an externally glued patch, and it's clear that our design will stand up to industrial heavy duty use. Engineering standards: Constructed with durable materials and reinforced with advanced plastic seam welding techniques, our premium Myco Grow Bags are made of high-quality PP material, able to withstand high-pressure sterilization with 10-25 PSI pressure (1.5-2 kg/cm²) and temperatures up to 262°F (128°C). Significantly higher tolerances than our competition. 

Our premium bags are crafted with advanced technology for increased durability. Expertly designed after extensive mycologist input. Unmatched thickness and size. Includes double wall injection port.  Our top-quality Ace Of Spades Premium Myco Grow Bags were made for discerning mycologists. Avoid contamination using Ace's and ensure successful sterilization with our reliable bags. Our design specifications called for heavier duty premium grade polypropylene material. The filter includes a finer nylon mesh that improves airflow and particle filtration, especially from airborne molds. We also upgraded our self healing injection port by welding another PP wall making it fully encapsulated.  Ours come in a standard size of 8' x 5' x 20' x 8mil and have neatly trimmed and upgraded welded seams for rugged structural integrity. Suitable for various mushroom cultivation purposes, our bags have a thicker PP gauge and increased load-bearing capacity, stand up to higher temperatures, pressures and won't fail during sterilization.  Designed and built by Forever Green Indoors for Mycologists who need ruggedly built dependable mushroom grow tech.  Featuring:  Advanced Air Exchange Design: These bags have a 0.2-micron filter patch, allowing for proper air exchange and preventing contamination, promoting ideal conditions for mushroom growth. Upgraded inoculation port : Our grow bags have a double walled self-healing injection port for easy inoculation with spores or liquid culture using a syringe. Just add your preferred liquid culture and you're ready to grow. Compare our port to most bags on the market without double wall protection, typically an externally glued patch, and it's clear that our design will stand up to industrial heavy duty use. Engineering standards: Constructed with durable materials and reinforced with advanced plastic seam welding techniques, our premium Myco Grow Bags are made of high-quality PP material, able to withstand high-pressure sterilization with 10-25 PSI pressure (1.5-2 kg/cm²) and temperatures up to 262°F (128°C). Significantly higher tolerances than our competition. 

Our premium bags are crafted with advanced technology for increased durability. Expertly designed after extensive mycologist input. Unmatched thickness and size. Includes double wall injection port.  Our top-quality Ace Of Spades Premium Myco Grow Bags were made for discerning mycologists. Avoid contamination using Ace's and ensure successful sterilization with our reliable bags. Our design specifications called for heavier duty premium grade polypropylene material. The filter includes a finer nylon mesh that improves airflow and particle filtration, especially from airborne molds. We also upgraded our self healing injection port by welding another PP wall making it fully encapsulated.  Ours come in a standard size of 8' x 5' x 20' x 8mil and have neatly trimmed and upgraded welded seams for rugged structural integrity. Suitable for various mushroom cultivation purposes, our bags have a thicker PP gauge and increased load-bearing capacity, stand up to higher temperatures, pressures and won't fail during sterilization.  Designed and built by Forever Green Indoors for Mycologists who need ruggedly built dependable mushroom grow tech.  Featuring:  Advanced Air Exchange Design: These bags have a 0.2-micron filter patch, allowing for proper air exchange and preventing contamination, promoting ideal conditions for mushroom growth. Upgraded inoculation port : Our grow bags have a double walled self-healing injection port for easy inoculation with spores or liquid culture using a syringe. Just add your preferred liquid culture and you're ready to grow. Compare our port to most bags on the market without double wall protection, typically an externally glued patch, and it's clear that our design will stand up to industrial heavy duty use. Engineering standards: Constructed with durable materials and reinforced with advanced plastic seam welding techniques, our premium Myco Grow Bags are made of high-quality PP material, able to withstand high-pressure sterilization with 10-25 PSI pressure (1.5-2 kg/cm²) and temperatures up to 262°F (128°C). Significantly higher tolerances than our competition. 

Our premium bags are crafted with advanced technology for increased durability. Expertly designed after extensive mycologist input. Unmatched thickness and size. Includes double wall injection port.  Our top-quality Ace Of Spades Premium Myco Grow Bags were made for discerning mycologists. Avoid contamination using Ace's and ensure successful sterilization with our reliable bags. Our design specifications called for heavier duty premium grade polypropylene material. The filter includes a finer nylon mesh that improves airflow and particle filtration, especially from airborne contams. Ours come in a standard size of 8' x 5' x 20' x 8 Mil and have neatly trimmed and upgraded welded seams for rugged structural integrity. Suitable for various mushroom cultivation purposes, our bags have a thicker PP gauge and increased load-bearing capacity, stand up to higher temperatures, pressures and won't fail during sterilization.  Designed and built by Forever Green Indoors for Mycologists who need ruggedly built dependable mushroom grow tech.  Featuring:  Advanced Air Exchange Design: These bags have a 0.2-micron filter patch, allowing for proper air exchange and preventing contamination, promoting ideal conditions for mushroom growth. Upgraded inoculation port : Our grow bags have a double walled self-healing injection port for easy inoculation with spores or liquid culture using a syringe. Just add your preferred liquid culture and you're ready to grow. Compare our port to most bags on the market without double wall protection, typically an externally glued patch, and it's clear that our design will stand up to industrial heavy duty use. Engineering standards: Constructed with durable materials and reinforced with advanced plastic seam welding techniques, our premium Myco Grow Bags are made of high-quality PP material, able to withstand high-pressure sterilization with 10-25 PSI pressure (1.5-2 kg/cm²) and temperatures up to 262°F (128°C). Significantly higher tolerances than our competition. 

Our premium bags are crafted with advanced technology for increased durability. Expertly designed after extensive mycologist input. Unmatched thickness and size. Includes double wall injection port.  Our top-quality Ace Of Spades Premium Myco Grow Bags were made for discerning mycologists. Avoid contamination using Ace's and ensure successful sterilization with our reliable bags. Our design specifications called for heavier duty premium grade polypropylene material. The filter includes a finer nylon mesh that improves airflow and particle filtration, especially from airborne contams. Ours come in a standard size of 8' x 5' x 20' x 8 Mil and have neatly trimmed and upgraded welded seams for rugged structural integrity. Suitable for various mushroom cultivation purposes, our bags have a thicker PP gauge and increased load-bearing capacity, stand up to higher temperatures, pressures and won't fail during sterilization.  Designed and built by Forever Green Indoors for Mycologists who need ruggedly built dependable mushroom grow tech.  Featuring:  Advanced Air Exchange Design: These bags have a 0.2-micron filter patch, allowing for proper air exchange and preventing contamination, promoting ideal conditions for mushroom growth. Upgraded inoculation port : Our grow bags have a double walled self-healing injection port for easy inoculation with spores or liquid culture using a syringe. Just add your preferred liquid culture and you're ready to grow. Compare our port to most bags on the market without double wall protection, typically an externally glued patch, and it's clear that our design will stand up to industrial heavy duty use. Engineering standards: Constructed with durable materials and reinforced with advanced plastic seam welding techniques, our premium Myco Grow Bags are made of high-quality PP material, able to withstand high-pressure sterilization with 10-25 PSI pressure (1.5-2 kg/cm²) and temperatures up to 262°F (128°C). Significantly higher tolerances than our competition. 

Our premium bags are crafted with advanced technology for increased durability. Expertly designed after extensive mycologist input. Unmatched thickness and size. Includes double wall injection port.  Our top-quality Ace Of Spades Premium Myco Grow Bags were made for discerning mycologists. Avoid contamination using Ace's and ensure successful sterilization with our reliable bags. Our design specifications called for heavier duty premium grade polypropylene material. The filter includes a finer nylon mesh that improves airflow and particle filtration, especially from airborne contams. Ours come in a standard size of 8' x 5' x 20' x 8 Mil and have neatly trimmed and upgraded welded seams for rugged structural integrity. Suitable for various mushroom cultivation purposes, our bags have a thicker PP gauge and increased load-bearing capacity, stand up to higher temperatures, pressures and won't fail during sterilization.  Designed and built by Forever Green Indoors for Mycologists who need ruggedly built dependable mushroom grow tech.  Featuring:  Advanced Air Exchange Design: These bags have a 0.2-micron filter patch, allowing for proper air exchange and preventing contamination, promoting ideal conditions for mushroom growth. Upgraded inoculation port : Our grow bags have a double walled self-healing injection port for easy inoculation with spores or liquid culture using a syringe. Just add your preferred liquid culture and you're ready to grow. Compare our port to most bags on the market without double wall protection, typically an externally glued patch, and it's clear that our design will stand up to industrial heavy duty use. Engineering standards: Constructed with durable materials and reinforced with advanced plastic seam welding techniques, our premium Myco Grow Bags are made of high-quality PP material, able to withstand high-pressure sterilization with 10-25 PSI pressure (1.5-2 kg/cm²) and temperatures up to 262°F (128°C). Significantly higher tolerances than our competition. 

Aqua-X Pro Controller with AMP-3 Sensor Board, Free Phone App The NFS-2 controller from TrolMaster is one of the most advanced irrigation controllers available today. The NFS-2 is a multi-functional controller which can control multiple irrigation solenoids and pumps. The NFS-2 can also monitor multiple water sensors that can measure pH, EC / PPM, temperature and water content sensor. There is also a new optional DFW-1 flow-meter that serves multiple functions. Each of the solenoids and pumps can be "linked" to work together so that multiple grow areas can be controlled by a single NFS-2. When combined with the optional AMP-3, WCS-1 and WCS-2 sensors and the new DFW-1 flow-meter, the NFS-2 allows the user to monitor up to 50 sensors and receive mobile notifications if a problem is detected by the system. The NFS-2 was created to allow users to customize their irrigation cycle and be able to control the irrigation events by using either the DFM-1 digital flow-meter, WCS-1 or WCS-2 moisture content sensors or by simple timers. Each device being controlled by the NFS-2 can conceivably have an unlimited number of irrigation "events" each 24 hour day. "- 10’ touch screen- Phone monitoring (TM+) & web-based controlling- Increased Product Capacity of up to 300 pumps and 300 solenoids- Multiple reservoir monitoring on pH, EC, and Temp (with AMP-3)- Medium EC, Temp and Moisture monitoring (with WCS-2)- Water consumption Volume monitoring (with DFM-1)- Feed on Demand - Feed by volume - Auto-fill in the reservoir- Calendar control for multiple days preset schedules- Flexible Master pumps connections" 15"x11"x3.5" 7lbs

Quickly and accurately check water flow from nozzles, faucets, sprayers, and showers up to 5 GPM. Features: Provides High-Resolution Digital Flow Rate Display Within Seconds Collapsible 4.25in(10.8cm) Dia. Rubber Collection Funnel For Shower Heads Fits Under Faucets With As Little As 7.5in(19cm) Clearance Height Internal Diffuser Pad Controls Strong Nozzle Spray Simple Rugged Design Has No Moving Parts Self-Contained For One-Handed Operation     SC-5 UNIVERSAL FLOW METER SPECS: Range: 0.08-5.00GPM, 0.30-19.00LPM, 2-1140L/hr Accuracy: Greater of +/- 3% or 1 Least Significant Digit Resolution: 0.01GPM, 0.01LPM, 1L/hr Fluid Compatibility: Water & Water Based Solutions Only Battery: CR2032 Lithium Coin Cell (2-3 Year Battery Life) Size: 4.5in(11.4cm)W x 5in(12.7cm)L x 7.5in(19cm)Tall – 9in(23cm)Tall with funnel extended Weight: 0.7 lbs(0.3kg)

The ECS-3 provides a 5/8” diameter connector for some of Fluence brands LED fixtures using Threaded Waterproof  Connectors for interconnecting. Like the other ECS kits, the ECS-3 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / Threaded Waterproof  Connector cable.

TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.  

TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option. 

TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option. This Lighting Control Adapter D (LMA-12) is specially designed for controlling D ballast.

TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.