All our grow tech
Trolmaster TrolMaster Hydro X SPH-1 RJ12 Splitter Hub $ 32.00 $ 32.00
LED indicator Plug & Play he SPH-1 Splitter Hub from TrolMaster makes installation of our controllers as easy as plugging in a phone cable. The SPH-1 hub uses a single RJ12 cable input jack, and provides (8) individual RJ12 output jacks that can be connected to various TrolMaster sensors, adapters and device modules. Using the SPH-1 allows for a "clean" installation and eliminates the need for daisy-chain Y-splitters to be used to interconnect multiple modules or sensors. The SPH-1 is also a powered hub, meaning that it will boost the signals passing through the SPH-1 allowing more modules, sensors and light adapters to be connected to the TrolMaster controllers. By using the SPH-1, an almost unlimited number of LED / HID lights can be controlled using a single TrolMaster controller. The SPH-1 comes complete with the SPH-1 hub, a 16 foot RJ12 cable and the 12vdc power supply. The SPH-1 can be located in a central location with a single RJ12 cable connecting it to the main controller. From the SPH-1 hub, the individual RJ12 jacks can be connected to each of the sensors, device modules, or lighting adapters. Included In Package: 1x RJ12 Splitter Hub 1x 12V Power Adapter 1x 4 ft RJ12 Cable Specifications: Input Voltage: 12VDC Maximum Current: 1A Working Environment: Temperature 32-122°F, Humidity≤90% Packaging Dimensions: 160mm(L) x 85mm(W) x 90mm(H)
Trolmaster TrolMaster Hydro X ECS-1 RJ12 Extension Cable Set $ 20.00 $ 20.00
TrolMaster modules and sensors all come complete with a RJ12 16ft cable, Y-splitter and RJ12 4 ft cable to connect to the Hydro-x. When connecting modules that are farther apart, you can use the Extension cable set ECS-1. The ECS-1 comes complete with another 16ft cable, Y-splitter and 4 ft cable. Package Includes: 1 x Male-to-Male 16ft RJ12 Cable 1 x Male-to-Male 4ft RJ12 Cable 1 x RJ12 T-Splitter
Trolmaster TrolMaster Hydro X ECS-5 RJ12 to M16 Connector For Fluence LEDs $ 23.00 $ 23.00
The ECS-5 provides a 5/8” diameter connector for some of Fluence brands newer LED fixtures using PushLock Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-5 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / PushLock Waterproof Connector cable.
Trolmaster Trolmaster Hydro-X ECS-2 Lighting Adapter RJ12 to screw down terminals universal convertor manual wiring $ 26.00 $ 26.00
Overview The ECS-2 cable set is designed to connect Hydro-X to most LED drivers with bare wire +/- wiring. (not necessary when buying the LMA-14 which now includes a screw down adapter). For connecting to a Hydro X HCS-1 or 2. Use with FGI Uniformity Pro 640 & Uniformity Pro Flex (when not using the WiFi controller), FGI Lightpanel 500 (requires a Cat6 adapter plug). Most LED drivers have a pair of + and - wires which control dimming functions. This adapter set provides a simple screw down wiring terminal with a 3.5mm jack connector and RJ-12 extension wiring allowing simple connection from your LED to the Hydro-X controller. The ECS-2 comes with a 16 ft RJ12 cable, a Y-splitter and a special 4 ft RJ12 / 3.5mm jack cable. The special cable connects to your lighting fixture / LED driver using the two-screw terminal block to connect to loose wires on the LED driver. Simply connect the two wires from your LED driver to the terminal block, each of the lights being controlled are wired in a “daisy-chain” configuration back to the Hydro-X LMA adapter. ~specifications~ 1 x 16 ft RJ12 Cable 1 x 4 ft RJ12 to 3.5 Jack Cable 1 x T-shaped Splitter 1 x 3.5mm Female Barrel Connector
Trolmaster TrolMaster Hydro X ECS-6 16ft 4 Pin Waterproof Extension Cable $ 20.00 $ 20.00
The ECS-6 extension cable is simply a 16 ft extension cable to use with the WCS-1 moisture contet sensor. It has a male and female end and can extend the distance between WCS-1 module and the sensor probe.