Trolmaster Hydro X DSC-1 CO2 Device Station For Grow Room Control $ 61.95 $ 65.00
The TrolMaster DSC-1 CO2 control / device module allows user the to easily connect and control standard supplemental CO2 devices or CO2 exhaust controls to the Hydro-x. Any CO2 device that is 10-amps @ 120 volts or less can be controlled by the DSC-1.
TrolMaster Hydro X DSP-1 Program Device Station Timer $ 69.25 $ 74.95
The TrolMaster DSP-1 program device module (timer module) works like a multi-function timer. The DSP-1 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x. Any device that is 10-amps at 120 volts or less can be controlled by the DSP-1.
TrolMaster Hydro X DCC-1 Dual Condition Adaptor $ 66.50 $ 70.00
The TrolMaster DCC-1 provides a simple solution to control a single device, with more than one condition. For example, people like to turn on their exhaust fans when either temp or humidity is too high; shut off CO2 when turn on exhaust fans. There are many other examples where two conditions can be either combined or split. The DCC-1 is designed to be used in combination with one of TrolMaster’s plug-in style module. (DSC-1, DSH-1/2, DST-1/2 and DSP-1). Once connected to the plug-in module using the RJ12 cable built-into the DCC-1, the DCC-1 will act in concert with that plug-in module to control whatever device is connected to the plug-in module. The DCC-1 can also be set to work in two distinct ways using the “Interlock” function.INTERLOCK OFF: When the DCC-1 interlock is set to be off, EITHER condition that are associated with that pair of modules that are being used together can be activated individually for the device to be activated. (modules used in “parallel”)Examples from above for interlock OFF would be: Turn on an exhaust fan to reduce temp or humidity.Turn on an exhaust fan at night using a recycling timer OR when Humidity is too highINTERLOCK ON: When the DCC-1 Interlock is selected to be on, BOTH conditions that are associated with that pair of modules that are being used together must be activated TOGETHER in order for the device to be activated. (modules used in “series”)Examples from above for interlock ON would be: Shut off a CO2 device when an exhaust fan is runningShut off lights if the temperature gets too warm within the area.
TrolMaster Hydro X DSV-1 Low Voltage Control Station $ 69.25 $ 79.00
The Trolmaster DSV-1 is a low-voltage output module that can be used on the HCS-1, HCS-2 controllers. The DSV-1 can be addressed to be used as a temperature, humidity, CO2, or timer device module.Multiple voltage outputs are selectable by the user. The DSV-1 can output either 12 or 24 VDC up to .5 amps, or 12 or 24 VAC up to 4.8VA. Once the module is configured it will activate the low-volt device wired to the DSV-1.This allows the user to directly connect low voltage devices such as solenoids, valves, audio visual alarms or any other device that requires 12 to 24 volt AC or DC power to operate.
TrolMaster Hydro X DSD-1 Dry Contact Station $ 66.50 $ 70.00
LCD Display, Easy Operation Seamless Connection with Hydro-X Multiple purposes assignment Plug & Play The Trolmaster DSD-1 Dry-contact module provides a simple and flexible solution to who want to connect & control devices to the Hydro-X using a “dry-contact” or relay to activate the device. Some equipment requires either normally open or normally closed contact closure in order to activate the equipment. The DSD-1 is the product that you need to control those types of devices.* The DSD-1 can be configured to work as the other Trolmaster power modules work. The DSD-1 connects into the “devices” line on the Hydro-X and can be set to control an almost infinite number and types of devices such as:Lighting contactorsLight Deprivation curtainsPump contactorsTemperature devicesHumidity devicesCO2 devices* Consult FGI or Trolmaster for questions concerning your particular device. Package Includes: 1 x Dry Contact Station DSD-11 x 16ft RJ12 Cable1 x 4ft RJ12 Cable1 x RJ12 T-Splitter Specifications: Input Voltage: 100~240VAC, 50/60HzOutput Current: 10AOutput Voltage: 100~240VAC, 50/60HzWorking Environment: Temperature 32-122°F, Humidity=90%Packaging Dimensions: 85mm x 80mm x 90mm
Trolmaster Hydro X 4RS-1 Outlet Expansion Module For Grow Room Control $ 137.75 $ 145.00
The 4RS-1 is a universal 4-outlet power expansion module. It can be used with any of TrolMaster’s “plug-in” style device modules to expand the number of devices that can be controlled by the Hydro-x. A single 120-240 volt “trigger” cable on the 4RS-1 connects to your device / control module. When the device module is activated by the Hydro-x, the 4RS-1 trigger cable will turn on each of the 4 receptacles on the 4RS-1 with a 3 second time delay between each outlet being activated. That minimizes high start-up (inrush current) and allows up to 4 devices to be safely controlled. The 4RS-1 must be installed with a 120/240 volt power circuit (up to 50-amps @ 240vac). Three wire terminals inside the unit accept up to #6 AWG wire making connections to the power source easy.
TrolMaster Hydro X TSH-1 Temperature / Humidity Station $ 122.50 $ 116.38
The Trolmaster TSH-1 Temperature / Humidity Station is a 0-10 volt analog output control station that works with the HCS-1 and HCS-2 controllers. The TSH-1 can be configured to control either a temperature or a humidity device that requires a variable 0-10 volt input signal. The TSH-1 is capable of controlling variable speed fans, vents or any other device that accepts a 0-10 volt input. It features separate day and night “idle” speed settings built-into the TSH-1 as well as separate Day / Night setpoints accessed through the HCS controller.
TrolMaster Hydro X DSP-2 240V Program Device Station $ 89.65 $ 87.00
The TrolMaster DSP-2 program device module (timer module) works like a multi-function timer. The DSP-2 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x. Any device that is 10-amps at 240 volts or less can be controlled by the DSP-2.
Popular in the store
Other customers also love these best selling products
Aroya SOLUS EC Meter. 3 in 1 Soil Moisture, EC and Temp Sensor For Grow Mediums $ 514.95
We’re the largest distributor of the Solus Teros 12 Bluetooth EC Meters in the US. Volume pricing available. Find our Wholesale pricing and ordering here: Wholesale Dial in plant nutrition and watering schedules with SOLUS. No subscription fees or App cost. Free to use after purchase. If you're looking for a high-precision EC spot measurement tool to help you maximize your yield and quality, look no further than the SOLUS. This innovative tool pairs a pinpoint soil sensor with a seamless app to give you all the data and insights you need to take your cultivation to the next level. With the SOLUS, you can easily and quickly take spot measurements of your substrate, without any datalogging required. So why wait? Get the SOLUS and start growing better today! DESCRIPTION Yield. Quality. You always want more. If you’re a serious grower — even at home – you’re never not ready for big data and analytics. To grow better, you must first know better, and there’s no tool like SOLUS to mine your substrate for insights and help your harvest flourish. Use the SOLUS for easy and quick spot measurements of your substrate, no datalogging required and no information is retained. Water. Temp. EC. All impact the quality and yield of your crop. To level up your home growing requires precision at every stage, across every variable. With SOLUS, you’re in control of it all. Reap a harvest full of insights right on your phone. Simple to download, and even simpler to detect your sensor. Learn About EC Mine the insights buried in your substrate The SOLUS Sensor Kit combines the industry’s top soil sensor with a wireless analysis powerhouse. Together with the free SOLUS by AROYA app, they enable high-precision water content, temperature and electrical conductivity spot checks. The information SOLUS gathers helps growers maximize their substrate and unlock maximum yield potential. Learn more about the Solus on our YouTube Channel here: Quality Legendary sensor technology The product of more than 20 years of soil moisture research and technological refinement, the TEROS 12 sensor is trusted by scientists, farmers and growers alike. The TEROS 12’s ruggedized body lasts ten years or more. Its stainless-steel sensor needles slide easily into any substrate. It even ships with a free reusable sensor installation tool to help growers align the sensor perfectly for consistent, accurate measurements. INCLUDES One TEROS 12 Sensor One ZSC Handheld Bluetooth Module For App Connectivity APP Download - search AROYA SOLUS on the Apple or Android App stores FEATURES Quick and easy WC, EC and temp spot-checks Secure – won’t store data or monitor measurements over time Wirelessly pairs with any iOS or Android mobile device using Bluetooth Easy installation with installation tool Steel needles cut through the soil for better soil-sensor contact Robust, epoxy body for tough field conditions Dependable, long-life sensor Large volume of influence Ferrite core eliminates cable noise Device Operating System Compatibility and System Requirements The mobile device must be capable of using Bluetooth® Low Energy (BLE). The mobile device operating system compatibility is Apple iOS 10 or greater and Android OS 4.3 or greater. NOTE: Location services must be enabled to use the Bluetooth capabilities of the ZSC. This is a requirement set by the Android operating system (OS). TEROS 12 Operation Manual Download Link
FGI 730 NM Far Red LED Grow Lights. Industrial grade. Waterproof. $ 114.95
Overview Our far red lightbar is the most popular 4' long 730nm grow light on the market today. Industrial grade construction. All aluminium housing. Internal LED driver. Whether you are targeting the emerson effect, or tweaking plant morphology, or simply looking to add efficient and inexpensive PAR to your grow, our Far Red bars are the one chosen by thousands of growers worldwide. The lightbar features a crystal lens that covers the diodes, making it waterproof and resistant to overspray. Additionally, the lightbar is designed to be easily moved and bumped around, making it one of the most versatile and user-friendly grow lights on the market. However, what sets this light apart from others is its ability to stimulate plant morphology. By emitting a high intensity of far red light, the FGI Far Red Lightbar encourages plant growth and development, making it the perfect choice for any serious gardener or farmer. Use far red energy in veg to keep plants compact and strong. Recent studies at Utah State University by Dr Bruce Bugbee, have proven that additional energy, even in the red spectrum, keeps plants more compact. The science of using far red light on plants Recent studies at the University of Texas El Paso / University of Texas Arlington, concluded that plants exposed to full spectrum plus dosing with far red spectrum, increased overall plant mass/yield and also improved terpene profiles. Read the study here. The light coverage of this product is unmatched. It will fully cover a 4' wide grow tray in bloom and generally covers a 2' wide swath. We recommend a pair for each 4x4 grow space and this unit comes with hardware which allows you to position it inside the frame of most 5 and 8 bar full spectrum LEDs. This light system is one of the best on the market and will give your plants the light they need to thrive. Order now and be sure to get your grow space set up correctly so you can achieve maximum light coverage. Targeting the Emerson Effect. The Emerson Effect is the name given to the increase in the rate of photosynthesis that occurs when chloroplasts are exposed to far red energy just before the nighttime lights off cycle. This effect was first discovered by scientist Alexander Emerson in 1883, and it has since been extensively studied by plant biologists. While the Emerson Effect is typically associated with increases in photosynthesis, it can also lead to other changes in plant physiology, such as increased cell division and growth. One way to take advantage of the Emerson Effect is to use our supplimental far red LED grow light for 10-15 minutes after full spectrum lights are turned off. If you are looking to create the ideal environment for your plants, an LED grow light can help you to achieve the Emerson Effect. Far Red Spectrum Use We recommend 2 units per 4x4 grow space for daytime enhanced PPFD delivery. Height over canopy should be the same as your full spectrum LED but it will not hurt the plants to hang beneath a 4x4 LED. Time General use: Studies indicate that dosing with far red light is most effective with 4 hours on, 4 off, and 4 on. We recommend a digital wall timer, or if using TrolMaster the DSP-1 (for 110V connections) or a DSP-2 (for 240V). Emerson Effect: 10-15 minutes after full spectrum lights are turned off. Plant Morphology Theory Plants use phytochrome to detect and respond to red and far-red wavelengths. Phytochromes are signaling proteins that promote photomorphogenesis in response to red light and far-red light. Phytochrome is the only known photoreceptor that absorbs light in the red/far red spectrum of light (600-750 nm). (source: Wikipedia) Far Red light is believed to create a competitive response in plants, pushing desirable terpene production and assisting in the formation of trichomes. Read more about Far Red and extended spectrum in this recent release from Design Lights Consortium: Read It Here ~Technical Specs~ Product 30W（±5%） PPF 72.1 umols/s 100-277VAC,50/60 Hz 102.3BTU IP65 44.88”x 2.24”x 1.53” 4.4 lbs Photometric Test Report Download Product Warranty (see our warranty here) 3 year warranty
FGI Uniformity Pro 640w Full Spectrum LED Grow Light 1600ppf 4x4 Samsung+Inventronics $ 599.00
The Uniformity Pro 640 was designed to be the best built, longest lasting 4' x 4' LED on the market today. Fully water resistant wiring connections, heavy duty all aluminum bars, sealed crystal lens diode covers, in an easy to install folding frame. We use the highest quality and latest Samsung LM301B top bin diodes to create the FGI grow spectrum. The Uniformity Pro 640 is ideal for very high light intensity cultivation and is DLC approved for utility rebates in the US. We overbuild our lights intentionally so they will last for years and years in harsh grow environments. AT 37 lbs this unit is best in class for construction. Wet rated means it's okay to receive accidental over-spray. Suitable for vertical racks, over trays and benches or in 4' x 4' or larger grow tents. For use with the FGI Dimming Controller for light management and scheduling. Featuring • All wiring connections are sealed with IP68 waterproof connections. • The LED diodes are covered with gorilla glass like crystal lens coverings. • Bars are heavy duty extruded aluminum. • 1600 umols/s total PPF output. • Nearly 1300 umols/ms of usable photosynthetic light output at 9-12". Learn more about the FGI Uniformity Pro on our YouTube Channel here: Our LED diode mix creates the ideal grow spectrum for indoor plants. 3200 full spectrum Samsung LM301B neutral white diodes in 4000K CCT. The white diodes are paired with 48 Osram Osolon Hyper Red Square 660nm diodes, from Osram's horticulture optimized LED diode line. Each light comes with a 10' power cord. It also comes with a 4' connection cable allowing you to control a network of lights with various lighting controllers. Our FGI Dimming Controller is one example and allows advanced programming including on/off timers, sunrise and sunset programming and automatically dims the light if temperatures in the grow space exceed your programmed limit. Par Map @ 12" FGI Spectrum The Uniformity Pro 640 carries a full five year warranty. It's 5% larger than the Gavita 1700e and Fluence Spydr 2 series. Specifications: Product Name: FGI HT-02 Uniformity Pro 640Part Number: FGIUP8Rev2UPN: 887437032817Dimensions: W x L x H (inches) 47x47x4 IMPORTANT: The unit does not ship with a standard plug. Please request a free 110/220/270V plug with your purchase if you need one. DiodesBrand Name: Samsung LM301B top binNumber of pieces: 3200Model/Part number: Neutral WhiteCCT: 4000KCRI: 80 Other color DiodesBrand Name: Osram OsolonNumber of pieces: 48Model/Part number: Hyper Red CCT: 660nmRatio mix white/red (%): 3200:48 Lifetime: (L-90 - in hours L90B50 @ 36000HRS Photosynthetic Light MeasurementsPPF Output*: 1600PPF Efficacy*: 2.5Photopic Light MeasurementsLuminous Flux* 92,000Luminous Flux Efficacy*: 144OtherInput Power: 640wInput Voltage: 120-277Cord length: 10'Plug type (note if bare whip): Not includedPackaging DimensionsDimensions W x L x H (inches): 47x47x4Weight (pounds): 36 Operating Temp range (F): 33-104 IP rating (UL-ETL or estimated final UL-ETL): wetDimming / TuningDimming (Yes/No): YesIndpendent channel dimming (Yes/No): NoController type: External 0-10V Product Warranty:5 years
TrolMaster Hydro X HCS-1 Hydro X Grow Room Controller $ 310.00 $ 329.00
If you're looking for a complete, professional-grade environmental control system, the TrolMaster Hydro-X is the perfect solution. This modular system is easy to install and expand, and can be fully customized to your needs. With the free TrolMaster App, you can access all system settings and alerts from anywhere, anytime. The Hydro-X system is compatible with most grow lights brands, HVAC systems, mini-split air conditioners, commercial dehumidifiers and humidifiers, as well as CO2 generators or regulators. So whether you're looking to maintain optimal growing conditions in your indoor garden the Hydro-X system has you covered. Includes the TrolMaster 3 in 1 sensor bundle and RJ16 cables. A turn-key environmental sensor system to tune up your gardens success. Looking for a trusted high volume TrolMaster Official Distributor in North America? Look no further than Forever Green Indoors! We're the leading provider of quality TrolMaster products and accessories, and we're here to help you keep your indoor spaces looking their best. This controller is as user friendly as it gets, and installing and setting it up is simple. It's compatible with just about every major grow light, HVAC system, dehumidifier/humidifier, and even CO2 system. You can use the free TrolMaster app, and achieve complete control of your grow room remotely, freeing you from the grow room and getting you back to doing the things you enjoy. Whats Included With The Hydro-X System: Hydro-X Environment Controller (x1) 3-in-1 Sensor for Temperature, Light, and Humidity (x1) RJ12 Cable Set (x1) Male-to-Male 16ft RJ12 Cable (x1) Male-to-Male 4ft RJ12 Cable (x1) RJ12 T-Splitter (x1) Achieve Complete Grow Room Control With The Hydro-X With one piece of equipment, you can essentially control anything you need in your grow room. There are more than 17 separate types of control modules, granting you the ability to connect the Hydro-X to A/C's and HVAC To put it simply, the TrolMaster Hydro-X Environment Controller With 3-in-1 Sensor is the most intelligent and versatile system on the market. The Hydro-X System Features A Modular Design Another great feature of the Hydro-X Environment Control System is that you can control and customize every last detail of the controller. The modular design means you can configure the separate components in unique ways to create the best environment for your plants because every grow is different. You can control up to 512 different grow lights on two separate channels, and operate different systems simultaneously. Just about every lighting brand and product on the market is compatible with the Hydro-X with different adapters. NOTE: 2 knob fixtures allowing individual control of 2 different bulbs can NOT be controlled by the Hydro X Currently we have: LMA-11 for Phantom - Lighting Adapter P LMA-12 for Dimlux - Lighting Adapter D LMA-13 for Sun System - Lighting Adapter S LMA-14 Lighting Adapter F for FGI brand LEDs LMA-14 for HIDs like Growers Choice/Illuminar/PL LMA-14 for LEDs like Fluence/Next light/Spectrum King LMA-15 for DLI - Lighting Adapter DLI LMA-T for ThinkGrow - Lantern Schedule Adapter F Using the LMA-14 Adapter (Adapter F) for multiple lights The LMA-14 Adapter can be used for 24 Drivers (LEDs) or 40 Ballasts with either the HCS-1 or HCS-2 Hydro-X controllers. Both the Hydro-X Controllers have 2 line lights giving the ability to control double the amount of each type of light (48 LEDs and 80 Ballasts). All the other controlled modules are connected to the device channel. For temperature control we have: TS-1/TS-2 for HVAC Systems The TS-1 (4 Wire) & TS-2 (6 Wire) thermostat stations are designed to replace a thermostat connected to a conventional cool only HVAC unit. ARS-1 for Mini Split System The ARS-1 mini-split air conditioner controller is a universal controller that works with most mini-split air conditioners (and some window-type AC units too), as long as the unit came with an IR / infrared remote controller. DST-1 for Temperature-Controlled Outlets (120 Volt) The TrolMaster DST-1 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps at 120 volts or less can be controlled by the DST-1. DST-2 for Temperature-Controlled Outlets (240 Volt) The TrolMaster DST-2 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps at 240 volts or less can be controlled by the DST-2. For humidity control we have: HS-1 for Commercial Dehumidifiers The HS-1 is the best way to control your dehumidifiers by eliminating the need to control the high-amperage / inrush current associated with dehumidifiers. DSH-1/DSH-2 for Humidity-Controlled Outlets The TrolMaster DSH-1 (120 Volt) & DSH-2 (240 Volt) Humidity control / device modules allow the user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. DSC-1 for CO2-Controlled Outlets The TrolMaster DSC-1 CO2 control / device module allows user the to easily connect and control standard supplemental CO2 devices or CO2 exhaust controls to the Hydro-x. Any CO2 device that is 10-amps @ 120 volts or less can be controlled by the DSC-1. DSP-1/DSD-1 The TrolMaster DSP-1 (120 Volt) program device module (timer module) works like a multi-function timer. The DSP-1 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x. The Trolmaster DSD-1 Dry-contact module provides a simple and flexible solution to who want to connect & control devices to the Hydro-X using a dry-contact or relay to activate the device. All of these items are listed at the top under the custom options tabs or if you would like to view them individually they are all listed on our TrolMaster brand page here. https://forevergreenindoors.com/collections/trolmaster