SpotOn Products by Innoquest
Innoquest SpotOn Quantum PAR Meter measures photosynthetic light... $ 335.00 $ 335.00
This precise meter provides scientifically accurate Photosynthetic Active Radiation (PAR) light readings under any light source, including LED. And with the purchase of the optional wand, you can get even more accurate readings. Accurate PPFD Light Readings From Any Light Source: Full sun to full shade indoors or outdoors. Artificial light sources (LED, High Pressure Sodium, Metal Halide, Florescent, Halogen…). Three Modes Of Operation: Instant Spot Measurement mode for PAR light readings. Scan mode for quickly averaging PAR over an area. DLI mode shows Daily Light Integral on the LCD (no computer needed). Compares to Apogee Instruments Spectral Reading Range Additional Benefits/Features Compact and easy to use Water and impact resistant Integral mounting plate acts as a stand, or can be used as a stake. Also includes lanyard or hanger hole for suspending the meter, and magnet mounts. 1/4-20 threaded hole for mounting on tripod or extension wands, selfie sticks. Includes and sensor cover and soft carry pouch. Learn more about the SpotOn PAR Meter on our YouTube Channel here: QUANTUM PAR LIGHT METER SPECS:Range:PAR LIGHT: 0.0 to 6,500 μmol m-2 s-1DLI (Daily Light Integral): 0.0 to 560.0 moles m-2 day-1Display Resolution:PAR LIGHT: 0.1 μmol m-2 s-1 from 0.0 to 99.91 μmol m-2 s-1 from 100 to 6,500DLI: 0.1 moles m-2 day-1Accuracy: +/- 5% (each meter is calibrated to a NIST traceable light sensor on a broad-spectrum light source)Azimuth Error: +/- 1% over 360°Daily Light Integral (DLI): Calculated continuously from light readings every 3 minutesWater Resistant: IP-65 rated for use in rain, irrigation, and condensing environments (do not submerge)Operating Environment: 32-130°F(0-55°C) with 0-100% RH condensing okBattery: CR2032 3v coin cell lithium included (2-year battery life)Size & Weight: 1.75in(4.5cm)W x 5.75in(14.6cm)L x .85in(1.8cm)D0.17lb(77g)
Innoquest SpotOn Quantum PAR Meter Bundle with DLI... $ 395.00 $ 429.00
Our Story: Forever Green is the largest US distributors of SpotOn products. We ship direct from our warehouse (no drop shipping). 60 day returns with free expedited ground shipping to the lower 48 states. And low cost expedited shipment worldwide. This highly precise meter provides scientifically accurate Photosynthetic Active Radiation (PAR) light readings under any light source, including LED. And with the purchase of the optional wand, you can get even more accurate readings.Accurate PPFD Light Readings From Any Light Source: Full sun to full shade indoors or outdoors. Artificial light sources (LED, High Pressure Sodium, Metal Halide, Florescent, Halogen…). Three Modes Of Operation: Instant Spot Measurement mode for PAR light readings. Scan mode for quickly averaging PAR over an area. DLI mode shows Daily Light Integral on the LCD (no computer needed). Compares to Apogee Instruments Spectral Reading Range Additional Benefits/Features 32" 3 piece extension wand included Compact and easy to use Water and impact resistant Integral mounting plate acts as a stand, or can be used as a stake. Also includes lanyard or hanger hole for suspending the meter, and magnet mounts. 1/4-20 threaded hole for mounting on tripod or extension wands, selfie sticks. Includes and sensor cover and soft carry pouch.Learn more about the SpotOn PAR Meter on our YouTube Channel here: ~Technical Specs~QUANTUM PAR LIGHT METER SPECS:Range:PAR LIGHT: 0.0 to 6,500 μmol m-2 s-1DLI (Daily Light Integral): 0.0 to 560.0 moles m-2 day-1Display Resolution:PAR LIGHT: 0.1 μmol m-2 s-1 from 0.0 to 99.91 μmol m-2 s-1 from 100 to 6,500DLI: 0.1 moles m-2 day-1Accuracy: +/- 5% (each meter is calibrated to a NIST traceable light sensor on a broad-spectrum light source)Azimuth Error: +/- 1% over 360°Daily Light Integral (DLI): Calculated continuously from light readings every 3 minutesWater Resistant: IP-65 rated for use in rain, irrigation, and condensing environments (do not submerge)Operating Environment: 32-130°F(0-55°C) with 0-100% RH condensing okBattery: CR2032 3v coin cell lithium included (2-year battery life)Size & Weight: 1.75in(4.5cm)W x 5.75in(14.6cm)L x .85in(1.8cm)D0.17lb(77g)
Innoquest SpotOn Quantum Par Meter Extension Wand $ 58.95
The SpotOn Extension wand for reaching further in to plant canopy to take readings with the SpotOn PAR meter. (SpotOn PAR meter sold separately) Our rugged three piece steel extension wand can stand up to the harsh conditions of grow rooms. Threaded connections ensure the PAR meter will not twist when fully extended. The rubber handle grip helps keep a solid grip on your meter even with wet hands. Our large LED screen is easy to read, even in brightly lit rooms at a distance of 3' from the meter.
Innoquest SpotOn 1x3in Water Sensitive Paper, 50 Sheets.... $ 39.00 $ 39.95
About SpotOn Paper is water sensitive paper to quickly and easily assess your spray coverage. The yellow paper turns blue to allow for quick and easy spray visualization: visualize spray coverage, visualize droplet size and uniformity and visualize off target application. For use with crop spraying to ensure correct application of chemicals, reduce overspray and waste and ensure the correct amounts are applied. Pack of 50 1" x 3" sheets Does Not Warp In Humid Conditions Economical Alternative To Other Products On The Market Unique Fully Sealed Package Provides Re-Closable Seal Once Opened In House Proprietary Production Process Is Tightly Controlled Includes Tweezer And Desiccant Packet To Improve Shelf Life
Innoquest SpotOn 2x3in Spray Calibration Water Sensitive Paper,... $ 39.00 $ 39.95
SpotOn Paper is water sensitive paper to quickly and easily assess your spray coverage. The yellow paper turns blue to allow for quick and easy spray visualization: visualize spray coverage, visualize droplet size and uniformity and visualize off target application. For use with crop spraying to ensure correct application of chemicals, reduce overspray and waste and ensure the correct amounts are applied. Pack of 25 2" x 3" sheets Does Not Warp In Humid Conditions Economical Alternative To Other Products On The Market Unique Fully Sealed Package Provides Re-Closable Seal Once Opened In House Proprietary Production Process Is Tightly Controlled Includes Tweezer And Desiccant Packet To Improve Shelf Life
Innoquest SpotOn SC-2 Flow Rate & Sprayer Nozzle... $ 206.95 $ 219.00
2.25GPM with Tip Wear Indication provides important information about worn sprayer nozzles Quick and accurate flow rate checking of individual sprayer nozzles. This model is best for flow rates below 2.25 GPM typical of herbicide and insecticide application. Our SC-5 model is best for flow rates up to 5 GPM. FEATURES: NO CALCULATIONS OR APP DOWNLOAD REQUIRED: Automatically calculates and displays tip flow rate in GPM, LPM, oz/min, tip wear in %, and application rate in GPA/LPH (just enter your speed and nozzle spacing).FAST AND SIMPLE OPERATION: Readings in about 10 seconds per tip.QUICKLY FIND WORN SPRAY NOZZLE TIPS: Industry guidelines recommend tip replacement once flow rate exceeds that of the new tip by 10%.ACCURATELY MEASURE TRUE TIP FLOW RATE: Today’s high-tech sprayers can only be properly calibrated and confirmed with this knowledge. SPRAYER CALIBRATOR MODEL SC-2 SPECS: Range & Units: 0.02 – 2.25 GPM, 0.08 – 8.52 LPM, 3 – 288 oz/min (GPM in US Gallons) Accuracy: +/- 2% or 1 Digit Resolution: 0.01 GPM, 0.01 L/min, 1 oz/min Fluid Compatibility: Water & Water Based Solutions Only Battery: CR2032 Included (3 Year Battery Life) Size: 3” (7.6 cm) Dia x 8.75” (22 cm) Tall Weight: 0.6 lbs (272 g)
Innoquest SpotOn SC-5 Universal Flow Meter $ 285.00 $ 349.00
Quickly and accurately check water flow from nozzles, faucets, sprayers, and showers up to 5 GPM. Features: Provides High-Resolution Digital Flow Rate Display Within Seconds Collapsible 4.25in(10.8cm) Dia. Rubber Collection Funnel For Shower Heads Fits Under Faucets With As Little As 7.5in(19cm) Clearance Height Internal Diffuser Pad Controls Strong Nozzle Spray Simple Rugged Design Has No Moving Parts Self-Contained For One-Handed Operation SC-5 UNIVERSAL FLOW METER SPECS: Range: 0.08-5.00GPM, 0.30-19.00LPM, 2-1140L/hr Accuracy: Greater of +/- 3% or 1 Least Significant Digit Resolution: 0.01GPM, 0.01LPM, 1L/hr Fluid Compatibility: Water & Water Based Solutions Only Battery: CR2032 Lithium Coin Cell (2-3 Year Battery Life) Size: 4.5in(11.4cm)W x 5in(12.7cm)L x 7.5in(19cm)Tall – 9in(23cm)Tall with funnel extended Weight: 0.7 lbs(0.3kg)
Innoquest SpotOn 9.75x11.75 Spray Calibration Water Sensitive Paper,... $ 109.00 $ 125.00
SpotOn® Paper is water sensitive paper to quickly and easily assess your spray coverage. The yellow paper turns blue to allow for quick and easy spray visualization: visualize spray coverage, visualize droplet size and uniformity and visualize off target application. For use with crop spraying to ensure correct application of chemicals, reduce overspray and waste and ensure the correct amounts are applied. Pack of 5 9.75 x 11.75. Also available in 1"x3" and 2"x3". sheets Does Not Warp In Humid Conditions Economical Alternative To Other Products On The Market Unique Fully Sealed Package Provides Re-Closable Seal Once Opened In House Proprietary Production Process Is Tightly Controlled Includes Tweezer And Desiccant Packet To Improve Shelf Life
Innoquest SpotOn Soil Moisture, EC and Temperature Meter.... $ 998.00 $ 998.00
Get precise and rapid soil moisture, EC and temperature readings with a low profile and long-lasting construction. Accurate and reliable soil readings in a fraction of the time with SpotOn Soil Moisture, EC and Temperature Meter. Featuring continuous reading for quick testing, this meter measures soil moisture, salinity (EC), and soil surface temperature (°F or °C) with ultra high frequency (100 MHz) measuring circuit for accuracy in a variety of soil types and salinity levels. Includes both 2.375” and 1.5” probe rods, and ensures durability with rubber mounted rods that resist bending in dry or rocky soil. Download Spec Sheet Download Instruction Manual Range: Volumetric Water Content: 0.0 - 100.0% m3/m3Electrical Conductivity: 0.0 - 5.00 mS/cm Bulk (dS/m) Temperature: 16°F(-9°C) - 120°F(49°C) Accuracy: Volumetric Water Content: +/- 3% Electrical Conductivity: +/- 0.1 mS/cmTemperature: +/- 1°F(0.6°C) Repeatability: Less Than 0.5% variation: VWC, EC, Temp Environmental: 32 - 122°F (0-50°C) Operating RangeIP-64 Rated (Rain and Dust Proof) Battery: (3) AA/LR6 Alkaline Batteries (included) 300 Hrs Continuous On-time Battery Life Meter Automatically Turns Off After 20 Minutes OfInactivity Dimensions: Meter: 14”(36cm)W x 2”(5cm)D x 35.8”(91cm)L2.4lb(1.1kg) As Shipped: 4.5”(11.4cm)W x 4.5”(11.4cm)D x36.5”(93cm)L 3.3lb(1.5kg)
Other customers also love these products
AROYA Aroya Solus EC Meter. Soil Moisture EC... $ 535.00 $ 549.00
Official authorized Aroya Solus Distributor. We ship direct from our warehouse. Free expedited ground shipping to the lower 48 states. Volume pricing available. Dial in plant nutrition and watering schedules with SOLUS. No subscription fees or App cost. Free to use after purchase. If you're looking for a high-precision EC spot measurement tool to help you maximize your yield and quality, look no further than the SOLUS. This innovative tool pairs a pinpoint soil sensor with a seamless app to give you all the data and insights you need to take your cultivation to the next level. With the SOLUS, you can easily and quickly take spot measurements of your substrate, without any datalogging required. So why wait? Get the SOLUS and start growing better today! DESCRIPTION Yield. Quality. You always want more. If you’re a serious grower — even at home – you’re never not ready for big data and analytics. To grow better, you must first know better, and there’s no tool like SOLUS to mine your substrate for insights and help your harvest flourish. Use the SOLUS for easy and quick spot measurements of your substrate, no datalogging required and no information is retained. Water. Temp. EC. All impact the quality and yield of your crop. To level up your home growing requires precision at every stage, across every variable. With SOLUS, you’re in control of it all. Reap a harvest full of insights right on your phone. Simple to download, and even simpler to detect your sensor. Learn About EC Mine the insights buried in your substrate The SOLUS Sensor Kit combines the industry’s top soil sensor with a wireless analysis powerhouse. Together with the free SOLUS by AROYA app, they enable high-precision water content, temperature and electrical conductivity spot checks. The information SOLUS gathers helps growers maximize their substrate and unlock maximum yield potential. Learn more about the Solus on our YouTube Channel here: Quality Legendary sensor technology The product of more than 20 years of soil moisture research and technological refinement, the TEROS 12 sensor is trusted by scientists, farmers and growers alike. The TEROS 12’s ruggedized body lasts ten years or more. Its stainless-steel sensor needles slide easily into any substrate. It even ships with a free reusable sensor installation tool to help growers align the sensor perfectly for consistent, accurate measurements. INCLUDES One TEROS 12 Sensor One ZSC Handheld Bluetooth Module For App Connectivity APP Download - search AROYA SOLUS on the Apple or Android App stores FEATURES Quick and easy WC, EC and temp spot-checks Secure – won’t store data or monitor measurements over time Wirelessly pairs with any iOS or Android mobile device using Bluetooth Easy installation with installation tool Steel needles cut through the soil for better soil-sensor contact Robust, epoxy body for tough field conditions Dependable, long-life sensor Large volume of influence Ferrite core eliminates cable noise Device Operating System Compatibility and System Requirements The mobile device must be capable of using Bluetooth® Low Energy (BLE). The mobile device operating system compatibility is Apple iOS 10 or greater and Android OS 4.3 or greater. NOTE: Location services must be enabled to use the Bluetooth capabilities of the ZSC. This is a requirement set by the Android operating system (OS). TEROS 12 Operation Manual Download Link
FGI FGI Far Red LED Grow Light. 700-760nm... $ 105.00 $ 149.00
Overview Rugged, waterproof, glass lens, 100-277 VAC. This unit is built to last. Our far red lightbar is the most popular 4' long 730nm grow light on the market today. Industrial grade construction. All aluminium housing. Internal LED driver. About Growing with Far Red Energy Far-red light is good for plant growth. It can increase photosynthesis, enhance growth, and increase plant size. Far-red light is significant to plants because it increases the ability of plants to capture light. Plants use light not only as a source of energy, but also for information about the surrounding environment. Far-red light is typically not absorbed much by plant leaves, and it doesn't drive any photosynthesis because it is mostly reflected off leaves. However, if a plant "senses" a greater ratio of far-red to normal light then it "knows" that obstructions or other plants are close to it. Far-red light can also regulate leaf angle and increase plant height and leaf area, via expression of associated genes, to capture more light energy. The lightbar features a crystal lens that covers the diodes, making it waterproof and resistant to overspray. Additionally, the lightbar is designed to be easily moved and bumped around, making it one of the most versatile and user-friendly grow lights on the market. However, what sets this light apart from others is its ability to stimulate plant morphology. By emitting a high intensity of far red light, the FGI Far Red Lightbar encourages plant growth and development, making it the perfect choice for any serious gardener or farmer. Use far red energy in veg to keep plants compact and strong. Recent studies at Utah State University by Dr Bruce Bugbee, have proven that additional energy, even in the red spectrum, keeps plants more compact. The science of using far red light on plants Recent studies at the University of Texas El Paso / University of Texas Arlington, concluded that plants exposed to full spectrum plus dosing with far red spectrum, increased overall plant mass/yield and also improved terpene profiles. Read the study here. The light coverage of this product is unmatched. It will fully cover a 4' wide grow tray in bloom and generally covers a 2' wide swath. We recommend a pair for each 4x4 grow space and this unit comes with hardware which allows you to position it inside the frame of most 5 and 8 bar full spectrum LEDs. This light system is one of the best on the market and will give your plants the light they need to thrive. Order now and be sure to get your grow space set up correctly so you can achieve maximum light coverage. Targeting the Emerson Effect. The Emerson Effect is the name given to the increase in the rate of photosynthesis that occurs when chloroplasts are exposed to far red energy just before the nighttime lights off cycle. This effect was first discovered by scientist Alexander Emerson in 1883, and it has since been extensively studied by plant biologists. While the Emerson Effect is typically associated with increases in photosynthesis, it can also lead to other changes in plant physiology, such as increased cell division and growth. One way to take advantage of the Emerson Effect is to use our supplimental far red LED grow light for 10-15 minutes after full spectrum lights are turned off. If you are looking to create the ideal environment for your plants, an LED grow light can help you to achieve the Emerson Effect. Far Red Spectrum Use We recommend 2 units per 4x4 grow space for daytime enhanced PPFD delivery. Height over canopy should be the same as your full spectrum LED but it will not hurt the plants to hang beneath a 4x4 LED. Time General use: Studies indicate that dosing with far red light is most effective with 4 hours on, 4 off, and 4 on. We recommend a digital wall timer, or if using TrolMaster the DSP-1 (for 110V connections) or a DSP-2 (for 240V). Emerson Effect: 10-15 minutes after full spectrum lights are turned off. Plant Morphology Theory Plants use phytochrome to detect and respond to red and far-red wavelengths. Phytochromes are signaling proteins that promote photomorphogenesis in response to red light and far-red light. Phytochrome is the only known photoreceptor that absorbs light in the red/far red spectrum of light (600-750 nm). (source: Wikipedia) Far Red light is believed to create a competitive response in plants, pushing desirable terpene production and assisting in the formation of trichomes. Read more about Far Red and extended spectrum in this recent release from Design Lights Consortium: Read It Here ~Technical Specs~ Product 30W（±5%） PPF 72.1 umols/s 100-277VAC,50/60 Hz 102.3BTU IP65 44.88”x 2.24”x 1.53” 4.4 lbs Photometric Test Report Download Product Warranty (see our warranty here) 3 year warranty
Trolmaster TrolMaster Hydro X HCS-1 Hydro X Grow... $ 312.50 $ 329.00
We're an official authorized TrolMaster distributor. Items ship same/next day direct from our warehouse using expedited ground shipping. Check todays promo codes to save even more. The Hydro-X modular system is easy to install and expand, and can be fully customized to your needs. With the free TrolMaster App, you can access all system settings and alerts from anywhere, anytime. The Hydro-X system is compatible with most grow lights brands, HVAC systems, mini-split air conditioners, commercial dehumidifiers and humidifiers, as well as CO2 generators or regulators. So whether you're looking to maintain optimal growing conditions in your indoor garden the Hydro-X system has you covered. Includes the 3 in 1 sensor bundle and RJ12/16 cables. A turn-key environmental sensor system to tune up your gardens success. This controller is as user friendly as it gets, and installing and setting it up is simple. It's compatible with just about every major grow light, HVAC system, dehumidifier/humidifier, and even CO2 system. You can use the free TrolMaster app, and achieve complete control of your grow room remotely, freeing you from the grow room and getting you back to doing the things you enjoy. What's Included With The Hydro-X System: Hydro-X Environment Controller (x1) 3-in-1 Sensor for Temperature, Light, and Humidity (x1) RJ12 Cable Set (x1) Male-to-Male 16ft RJ12 Cable (x1) Male-to-Male 4ft RJ12 Cable (x1) RJ12 T-Splitter (x1) Achieve Complete Grow Room Control With The Hydro-X With one piece of equipment, you can essentially control anything you need in your grow room. There are more than 17 separate types of control modules, granting you the ability to connect the Hydro-X to A/C's and HVAC To put it simply, the TrolMaster Hydro-X Environment Controller With 3-in-1 Sensor is the most intelligent and versatile system on the market. The Hydro-X System Features A Modular Design Another great feature of the Hydro-X Environment Control System is that you can control and customize every last detail of the controller. The modular design means you can configure the separate components in unique ways to create the best environment for your plants because every grow is different. You can control up to 512 different grow lights on two separate channels, and operate different systems simultaneously. Just about every lighting brand and product on the market is compatible with the Hydro-X with different adapters. LMA-11 for Phantom - Lighting Adapter P LMA-12 for Dimlux - Lighting Adapter D LMA-13 for Sun System - Lighting Adapter S LMA-14 Lighting Adapter F for most brands and also FGI brand LEDs LMA-15 for DLI - Lighting Adapter DLI LMA-T for ThinkGrow - Lantern Schedule Adapter F The LMA-14 Adapter can be used for 24 Drivers (LEDs) or 40 Ballasts with either the HCS-1 or HCS-2 Hydro-X controllers. Both the Hydro-X Controllers have 2 line lights giving the ability to control double the amount of each type of light (48 LEDs and 80 Ballasts).
Trolmaster TrolMaster Hydro X LMA-14 Lighting Adapter F... $ 55.00 $ 58.00
The LMA-14 lighting adapter is specially designed to control a wide variety of lighting systems including FGI brand LEDs and HIDs. TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.
FGI Square 2 LED Grow Light. 220W. High... $ 98.00 $ 229.00
Affordable, compact, extended far red spectrum LED grow light for plants of all types. Growing tomatoe starts with the FGI Square 2 The FGI Square 2 is an excellent entry level LED grow light for those looking to give their plants the sun's energy. Unlike other lights on today’s market that only provide certain colors needed by plant life (or lack thereof), this one provides all the necessary components: red, orange, yellow green and blue spectrum which together make up the building blocks for successful photosynthesis (and closely matches our sun). If you are looking for an easy to use LED to learn how to grow any plant types indoors, look no further than the FGI Square 2. Well loved by gardeners everywhere. Designed in the USA by Forever Green Indoors in Seattle WA. Plant lighting LED light experts since 2013. Use the Square 2 to grow all types of plants. Placing the light closer to the plants provides enough energy to match the summer sun. Pulling the light further away, or using the built in dimming, provides the right energy for starts and seedlings. Learn more about the FGI Square 2 on our YouTube Channel here: The Square 2 is one of the more efficient grow lights on today's market, using only 220 watts! This means it can produce far less heat than higher wattage lamps. We designed it to deliver the perfect balance of light. It's full spectrum white LEDs help plants grow healthy while adding 5% total deep as well as far-red diodes for an extended range that will optimize your plant growth! Key Features: Compact size: 20" x 20" x 3" Lightweight: 10 lbs Built in dimming knob: Adjusts levels for young to mature plants. Spectrum: Full spectrum plus 5% 660nm deep red plust 730nm far red LED diodes. Includes: 110V power cord. Two clip and steel cable wire hangars. Product manual. Technical PAR Chart at 24" From Diodes The right kind of light can make all the difference for your plants. Flowers, fruits and other high energy use types require levels as high as 1000 PPFD - a measurement that approximates natural sunlight. Spectrum From Our Sun We design grow lights to closely mimic natural sunlight (shown above). Although it's not possible to exactly duplicate a giant burning ball of hydrogen, we get as close as possible with the Square 2. Spectrum from the Square 2 Don't wait! We have limited stock on this LED. Buy yours today. ~Technical Specs~ProductDiodes (White) Brand name: Shenzhen LidedaNumber of pieces 360Total Diode Wattage Capacity (not actual draw) 300WMaximum Advertised Wattage 300Equivalent Wattage 1000CCT 4000KCRI 80CRIOther color Diodes (Red)Brand Name: Shenzhen LidedaNumber of pieces 96CCT NAWavelength 655-665nmOther color Diodes (FR) Brand Name: Shenzhen LidedaNumber of pieces 24CCT NAWavelength 730-745nmRatio mix white/red (%) 3:1 Projected Diode Lifetime (L-90) - in hours 50,000 hours Photosynthetic Light Measurements PPF Output* 436.1 umol/sPPF Efficacy* PPF 2.1umol/J PPFD Output 900 umols/ms at 24" below diodes Photopic Light MeasurementsLuminous Flux* 30342lmLuminous Flux Efficacy 151.7lm/w Other Input Power Watts 218Input Voltage 110VCord length 8' (2.44m, 18AWG )Plug type (note if bare whip) Molded 110V Product Dimensions Dimensions W x L x H (inches) 20x20x3.5Weight (pounds) 10Operating Temp range (F) -20℃ — +40℃IP rating (UL-ETL or estimated final UL-ETL)IP（UL- UL-ETL） IP20 Physical Dimensions Package Dimension W x L x H (inches) 24x23x5Inner carton (Yes/No) NOInner Carton Weight NOMaster Outer carton (Yes/No) YESNumber of pieces in Master Carton (1, 2, 3) 1Master carton weight (lbs) 2 Dimming / Tuning Dimming (Yes/No) Yes Product Warranty (against manufacturing defects) 3 years Warranty does not include coverage for damage caused by water or exposure to VOC's or electrical damage caused by voltage spikes. We recommend using a basic power surge suppressor such as those found on power strips to protect your light from utility power outages.
FGI FGI Grow Light Controller. Commercial Grade Universal... $ 299.00 $ 349.00
The FGI Dimming Controller provides control over one or many LEDs or 0-10V capeable ballasts. Designed to operate lighting over distances up to 100 feet, the FGI Dimming Controller features robust controls to manage your grow room environment. Connect the controller to an entire room and build sunrise, sunset scenarios to gently wake your plants and put them to bed as nature does in the wild. Or manage rooms and connect several Dimming Controllers to manage strain specific rows or vertical racks of LEDs. Automatically assists in room temperature control by dimming down lights if the temperature setting shows the room is too hot. Adjusts light levels back up when the room is within the setting you choose. Set on and off timers and program sunrise and sunset dimming to mimic natural sunlight and get the most out of your plants. For use with; All 0-10V dimmable LEDs (see your driver specifications) Not for use with our FGI Hortibest Commercial Series LEDs. Please view the Hortibest Master Controller. All 0-10V controllable lighting (may require custom wiring - or TrolMaster ECS cable kits which can be used universally.) Control one or many lights. Programmable Sunrise and Sunset Mode. System over temperature protection built in to protect your plants from accidental overheating in your grow space programming auto-dimming to reduce heat output. Attractive and easy to use touchscreen programming. 110V powered with battery backup. This unit is powerful enough to connect properly daisy chained units up to 30 meters from the control module. Q&A: Is this Controller an On/Off switch? Not with the V1 version however yes with our new V2 version which will dim the Uniformity Pro 320 and Uniformity Pro 640 to off. This controller can be used with LED drivers which have the ability to dim to zero to turn your light off. It will not eliminate power to the light. It will however turn off the diodes if your driver has dim to zero capability. Can the FGI Dimming Controller operate non-FGI LEDs? Yes, it can operate any LED that has a driver (power supply) that allows zero to ten volt dimming (0-10V). Consult the specifications of your LED light, or the specifications of the driver/power supply in the light itself. Most drivers have labels affixed to them that indicate their ability to do 0-10V dimming. How can I tell if my driver is 0-10V? 1. Look at the specifications for the model number of the driver, usually printed on a label on the driver. 2. Look for an indication on the label that the driver is 0-10V dimmable. 3. Look for a pair of wires on the driver/power supply that are NOT used to provide power to the light. Typically these are blue/black but can be a variety of colors based on the manufacturer. Can I connect the FGI Dimming Controller directly to the line voltage power on the light? No. Do not connect the Controller directly to line voltage power in your LED. It will damage the controller and void the return. Can this controller turn my LED totally off? Yes for the FGI Uniformity Pro series LEDs. No, it cannot dim the FGI Lightpanel or Lightbar products to off. For non FGI LEDs it depends on the driver/power supply. Consult the specifications for your driver. If the driver has the ability to "Dim To Off", then it is likely but not 100% that our Controller can dim your lights to off. Otherwise they will dim to 10% of the total light output only. Can I connect many lights to one controller? And if so how many? This depends on the distance you are trying to connect your lights over and the quality of the wire you use. We recommend insulated AWG 14 2 lead wire sold here on Amazon. And we also recommend you use IP68 twist connectors also sold here on Amazon to create a water proof, dust proof daisy chain. 3 way IP68 T connectors are ideal for this application. Product Manual Download Warranty: 24 months for manufacturing defects.
Trolmaster Trolmaster Hydro X DSH-1 Humidity Device Station $ 61.99 $ 70.00
LED Power Indicator RJ12 Cable Socket Addressing Plug & Play The TrolMaster DSH-1 Humidity control / device modules allow user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. The DSH modules are rated at 10-amps. *Use with dehumidifiers less than 7 amps to avoid current overload. Package Contents: 1 x Device Station 1 x 16ft RJ12 Cable 1 x 4ft RJ12 Cable 1 x RJ12 T-Splitter Specifications: Input Voltage: 100~240 VAC, 50/60Hz Output Current: 10A Output Voltage: 100~240 VAC, 50/60Hz Working Environments: Temperature 32-122°F, Humidity=90% Package Dimensions: 3.3(L) x 3(W) x 3.5(H) in G.W. per pack: 12 oz
Trolmaster Trolmaster Hydro X DSC-1 CO2 Device Station... $ 59.00 $ 65.00
Our Story: Forever Green is one of the largest US distributors of TrolMaster products. We ship direct from our warehouse (no drop shipping). 60 day returns with free expedited ground shipping to the lower 48 states. And low cost expedited shipment worldwide. The TrolMaster DSC-1 CO2 control / device module allows user the to easily connect and control standard supplemental CO2 devices or CO2 exhaust controls to the Hydro-x. Any CO2 device that is 10-amps @ 120 volts or less can be controlled by the DSC-1.