Trolmaster
TrolMaster Aqua X NFS-2 Pro Controller with AMP-3 Sensor Board, Free Phone App
$ 2,623.95
$ 2,623.95
Aqua-X Pro Controller with AMP-3 Sensor Board, Free Phone App
The NFS-2 controller from TrolMaster is one of the most advanced irrigation controllers available today. The NFS-2 is a multi-functional controller which can control multiple irrigation solenoids and pumps. The NFS-2 can also monitor multiple water sensors that can measure pH, EC / PPM, temperature and water content sensor. There is also a new optional DFW-1 flow-meter that serves multiple functions. Each of the solenoids and pumps can be "linked" to work together so that multiple grow areas can be controlled by a single NFS-2. When combined with the optional AMP-3, WCS-1 and WCS-2 sensors and the new DFW-1 flow-meter, the NFS-2 allows the user to monitor up to 50 sensors and receive mobile notifications if a problem is detected by the system. The NFS-2 was created to allow users to customize their irrigation cycle and be able to control the irrigation events by using either the DFM-1 digital flow-meter, WCS-1 or WCS-2 moisture content sensors or by simple timers. Each device being controlled by the NFS-2 can conceivably have an unlimited number of irrigation "events" each 24 hour day.
"- 10’ touch screen- Phone monitoring (TM+) & web-based controlling- Increased Product Capacity of up to 300 pumps and 300 solenoids- Multiple reservoir monitoring on pH, EC, and Temp (with AMP-3)- Medium EC, Temp and Moisture monitoring (with WCS-2)- Water consumption Volume monitoring (with DFM-1)- Feed on Demand - Feed by volume - Auto-fill in the reservoir- Calendar control for multiple days preset schedules- Flexible Master pumps connections"
15"x11"x3.5"
7lbs
Trolmaster
TrolMaster Hydro X ARS-1 AC Remote Station
$ 110.25
$ 110.25
Our Story: Forever Green is one of the largest US distributors of TrolMaster products. We ship direct from our warehouse (no drop shipping). 60 day returns with free expedited ground shipping to the lower 48 states. And low cost expedited shipment worldwide.
The ARS-1 mini-split air conditioner controller is a unique product that solves the age-old problem of having separate day and night temperature settings on your mini-split air conditioners. The ARS-1 is a universal controller that works with most mini-split air conditioners (and some window-type AC units too), as long as the unit came with an IR / infrared remote controller. We use the remote control that came with the unit to “teach” those IR signals to the ARS-1 module. Once the ARS-1 “learns” those remote control codes, the ARS-1 will send those same signals to the indoor mini-split head unit changing the setpoint to the desired Day or Night temperature setting automatically base on the photocell sensor status.
Trolmaster
TrolMaster Hydro X DCC-1 Dual Condition Adaptor
$ 78.38
$ 78.38
The TrolMaster DCC-1 provides a simple solution to control a single device, with more than one condition. For example, people like to turn on their exhaust fans when either temp or humidity is too high; shut off CO2 when turn on exhaust fans. There are many other examples where two conditions can be either combined or split.
The DCC-1 is designed to be used in combination with one of TrolMaster’s plug-in style module. (DSC-1, DSH-1/2, DST-1/2 and DSP-1). Once connected to the plug-in module using the RJ12 cable built-into the DCC-1, the DCC-1 will act in concert with that plug-in module to control whatever device is connected to the plug-in module. The DCC-1 can also be set to work in two distinct ways using the “Interlock” function.INTERLOCK OFF: When the DCC-1 interlock is set to be off, EITHER condition that are associated with that pair of modules that are being used together can be activated individually for the device to be activated. (modules used in “parallel”)Examples from above for interlock OFF would be: Turn on an exhaust fan to reduce temp or humidity.Turn on an exhaust fan at night using a recycling timer OR when Humidity is too highINTERLOCK ON: When the DCC-1 Interlock is selected to be on, BOTH conditions that are associated with that pair of modules that are being used together must be activated TOGETHER in order for the device to be activated. (modules used in “series”)Examples from above for interlock ON would be: Shut off a CO2 device when an exhaust fan is runningShut off lights if the temperature gets too warm within the area.
Trolmaster
TrolMaster Hydro X DSD-1 Dry Contact Station
$ 82.95
$ 82.95
LCD Display, Easy Operation
Seamless Connection with Hydro-X
Multiple purposes assignment
Plug & Play
The Trolmaster DSD-1 Dry-contact module provides a simple and flexible solution to who want to connect & control devices to the Hydro-X using a “dry-contact” or relay to activate the device. Some equipment requires either normally open or normally closed contact closure in order to activate the equipment. The DSD-1 is the product that you need to control those types of devices.*
The DSD-1 can be configured to work as the other Trolmaster power modules work. The DSD-1 connects into the “devices” line on the Hydro-X and can be set to control an almost infinite number and types of devices such as:Lighting contactorsLight Deprivation curtainsPump contactorsTemperature devicesHumidity devicesCO2 devices* Consult FGI or Trolmaster for questions concerning your particular device.
Package Includes:
1 x Dry Contact Station DSD-11 x 16ft RJ12 Cable1 x 4ft RJ12 Cable1 x RJ12 T-Splitter
Specifications:
Input Voltage: 100~240VAC, 50/60HzOutput Current: 10AOutput Voltage: 100~240VAC, 50/60HzWorking Environment: Temperature 32-122°F, Humidity=90%Packaging Dimensions: 85mm x 80mm x 90mm
Trolmaster
TrolMaster Hydro X DSH-2 240V Humidity Device Station
$ 92.10
$ 92.10
The TrolMaster DSH-2 Humidity control / device modules (240V) allow the user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. The DSH modules are rated @ 10-amps. *Use with dehumidifiers less than 7 amps to avoid current overload.
LED Power Indicator
RJ12 Cable Socket
Addressing
Plug & Play
Trolmaster
TrolMaster Hydro X DSP-1 Program Device Station Timer
$ 73.50
$ 73.50
The TrolMaster DSP-1 program device module (timer module) works like a multi-function timer. The DSP-1 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x. Any device that is 10-amps at 120 volts or less can be controlled by the DSP-1.
Trolmaster
TrolMaster Hydro X DSP-2 240V Program Device Station
$ 92.40
$ 92.40
The TrolMaster DSP-2 program device module (timer module) works like a multi-function timer. The DSP-2 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x. Any device that is 10-amps at 240 volts or less can be controlled by the DSP-2.
Trolmaster
TrolMaster Hydro X DST-1 Hydro-X Temperature Device Station
$ 73.50
$ 73.50
The TrolMaster DST-1 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps at 120 volts or less can be controlled by the DST-1.
Trolmaster
TrolMaster Hydro X DST-2 240V Temperature Device Station
$ 92.40
$ 92.40
The TrolMaster DST-2 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps @ 240 volts or less can be controlled by the DST-2.
Package Includes:
LED Power Indicator
RJ12 Cable Socket
Addressing
Plug & Play
Trolmaster
TrolMaster Hydro X ECS-1 RJ12 Extension Cable Set
$ 21.00
$ 21.00
TrolMaster modules and sensors all come complete with a RJ12 16ft cable, Y-splitter and RJ12 4 ft cable to connect to the Hydro-x. When connecting modules that are farther apart, you can use the Extension cable set ECS-1. The ECS-1 comes complete with another 16ft cable, Y-splitter and 4 ft cable.
Package Includes:
1 x Male-to-Male 16ft RJ12 Cable
1 x Male-to-Male 4ft RJ12 Cable
1 x RJ12 T-Splitter
Trolmaster
TrolMaster Hydro X ECS-5 RJ12 to M16 Connector For Fluence LEDs
$ 24.26
$ 24.26
The ECS-5 provides a 5/8” diameter connector for some of Fluence brands newer LED fixtures using PushLock Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-5 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / PushLock Waterproof Connector cable.
Trolmaster
TrolMaster Hydro X HCS-2 Hydro-X Pro Control System
$ 2,623.00
$ 2,623.00
Official authorized TrolMaster Distributor. Items ship same or next day, expedited UPS ground.
TrolMaster revolutionized environmental controller technology when it introduced the Hydro-X. The Hydro-X Pro continues the revolution with a 10’ touch-screen and a web-based software.
10.1' Touchscreen
Fully Customizable
Free Smart Phone App plus Web-base control system
The Hydro-X Pro is backwards compatible with all current Hydro-X control / device modules. It also provides greater flexibility and allows any plug-in module to be addressed to be whatever the user wants. The user can also set up each plug-in module to have multiple “conditions” that will activate the module, allowing for almost unlimited control options.
The Hydro-x Pro is designed to be a single room controller for reliability and ease-of-use. The Hydro-X Pro expands the capability of the original Hydro-X by allowing up to 50 sensors and up to 50 separate control modules to be connected to a single Hydro-X Pro. Multiple sub-zones can be created within the single grow space by linking a specific sensor, to a specific control function(s).The new 4-in-1 sensor comes with a LCD screen which provide the ease of onside monitoring.
Customized programming allows almost limitless degree of control. Each of the variables (Temperature, Humidity, CO2, Light) can be controlled independently, meaning a customized ramp-up / ramp-down can be used to closely simulate natural outdoor conditions, or simply allow complete customization of the environment. Displayed on an easy-to-read and construct “graph” it allows the user to have 100% control of their environment.
Another powerful feature of the Hydro-X Pro is the built-in calendar and calendar presets that allows the user to schedule an entire crop’s “recipe” within the Hydro-X Pro. All settings including Lighting, Temperature, Humidity, CO2, and Timers can be specified by the user as they “build” their multi-week crop schedules. Reminders can also be programmed to ensure critical tasks are not forgotten.
The TrolMaster APP will also allow for notifications with separate day/night limits to be received by the user. The web-based software provides easy access and more advanced remote control. Onboard data acquisition and the ability to store and share setting between multiple devices, means that user-defined programs & settings can be saved and loaded into multiple Hydro-X Pro units with ease. A personalized screensaver page can be uploaded through a USB port. The same upgradeable feature like Hydro-X gives you the ability for life-time improvements.
Included:
1x HCS-2 Controller
1x MBS-Pro Sensor
1x Mounting Plate
1x RJ12 Cable Set
Trolmaster
TrolMaster Hydro X HCS-3 Hydro X Plus Grow Room Controller
$ 1,249.00
$ 1,258.95
The Hydro X Plus / HCS-3 system is a professional-grade single-zone environmental control system that can control your entire grow space. Beautiful touch screen display.
It has an 800x480 7” LED display monitor and can control an unlimited number of lights, 8 temperature devices, 8 humidity devices, 4 CO2 devices, and 12 programmable timer devices (up to 50 schedules can be created). With incredible flexibility and the expanded product capacity, anyone can now easily customize their own grow room control system for maximum yields. Having multiple control modules also provides the option for the user to create multiple "stages" of growth. By staggering the start times of each stage, the user can minimize the amount of time that plants spend in vegetative growth and focus on the flowering phase.
Having multiple control modules also provides the option for the user to create multiple "stages" of temperature and humidity control, which will provide a more stable environment.
The HCS-3 system comes with an MBS-PRO 4-in-1 sensor to measure temperature, humidity, CO2 ppm, and the presence of light. Lighting control has never been easier or more capable.
The optional MBS-PAR light sensor can be added to the system. It will automatically adjust light intensity to precisely provide the exact amount of illumination for optimum plant growth. The Hydro-X Plus has been can also track your DLI levels. Having 2 separate lighting control channels allows the user to create multiple lighting layouts (and dimming sequences) based on their individual preferences. Besides controlling your room, if a problem is detected by the HCS-3, a warning message (notification) will be sent to your smartphone. Up to 10 smoke detectors and 10 water leak-detectors can be connected to the HCS-3 which will alert you if there are any fire or water leaks. The HCS-3 also offers multiple advanced functions to control your entire grow room or greenhouse such as Sunrise / Sunset simulation, DLI control, overheat protection, Spectrum & Group lighting control, and more.
Trolmaster
TrolMaster Hydro X LMA-24 Lantern Schedule Adaptor
$ 95.55
$ 95.55
TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.
Lantern lighting schedule is as follows; 12 hours lights on, 5.5 hours lights off, 1-hour lights on, 5.5 hours lights off, and repeat schedule. The 1 hour on in between off period fools the plants to stay in vegetative growth state.
This LMA-24 lighting adapter is specially designed to use both two channels on the Hydro-X system to create a lantern schedule control for any lights with 0-10V protocol. It is compatible with HIDs like Gavita/Nanolux/Luxx/Growers Choice/Illuminar/PL and LEDs like FGI/Fluence/Next light/Spectrum King
* Consult Trolmaster for questions concerning your particular device.
Trolmaster
TrolMaster Hydro X MBS-SD Hydro-X Smoke Detecor
$ 61.00
$ 61.00
The optional Smoke Detector (MBS-SD) can alert the user to smoke within their growing area at ALL TIMES. Up to 5 smoke detectors can be connected to a single Hydro-x controller. If ANY of the smoke detectors determine there is smoke in the area, the user will receive a user-alert on their phone to alert them to the potential problem BEFORE the problem gets out of hand.
"Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"
Trolmaster
TrolMaster Hydro X MBS-TH Hydro-X Replacement 3 in 1 sensor
$ 84.25
$ 84.25
3-in-1 Temp/Humid/Light sensor for the Hydro-X system. Note: This is a replacement or spare part. The main controller comes with a sensor already.
Note: This is a replacement or spare part. The main controller comes with a sensor already. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"
Trolmaster
TrolMaster Hydro X SPH-1 RJ12 Splitter Hub
$ 34.65
$ 34.65
LED indicator
Plug & Play
he SPH-1 Splitter Hub from TrolMaster makes installation of our controllers as easy as plugging in a phone cable. The SPH-1 hub uses a single RJ12 cable input jack, and provides (8) individual RJ12 output jacks that can be connected to various TrolMaster sensors, adapters and device modules. Using the SPH-1 allows for a "clean" installation and eliminates the need for daisy-chain Y-splitters to be used to interconnect multiple modules or sensors. The SPH-1 is also a powered hub, meaning that it will boost the signals passing through the SPH-1 allowing more modules, sensors and light adapters to be connected to the TrolMaster controllers. By using the SPH-1, an almost unlimited number of LED / HID lights can be controlled using a single TrolMaster controller. The SPH-1 comes complete with the SPH-1 hub, a 16 foot RJ12 cable and the 12vdc power supply. The SPH-1 can be located in a central location with a single RJ12 cable connecting it to the main controller. From the SPH-1 hub, the individual RJ12 jacks can be connected to each of the sensors, device modules, or lighting adapters.
Included In Package:
1x RJ12 Splitter Hub
1x 12V Power Adapter
1x 4 ft RJ12 Cable
Specifications:
Input Voltage: 12VDC
Maximum Current: 1A
Working Environment: Temperature 32-122°F, Humidity≤90%
Packaging Dimensions: 160mm(L) x 85mm(W) x 90mm(H)
Trolmaster
TrolMaster Hydro X TS-1 Thermostat Station Controls HVAC units that cool only
$ 110.25
$ 110.25
The TS-1 thermostat stations is designed to replace a thermostat connected to a conventional cool only HVAC unit. The TS-1 is wired to the HVAC system using the same low-voltage thermostat cable, and has the standard color-coded wiring as most thermostats. The Hydro-x allows separate Day and Night settings for each of up to (4) TS modules so multiple HVAC systems can be controlled by a single Hydro-X system.
specifications
LCD Display, Easy Operation
Seamless Connection with Hydro-X
Micro-SD for Firmware Upgrade
Address Assignment
Plug & Play
Trolmaster
TrolMaster Hydro X TSH-1 Temperature / Humidity Station
$ 128.63
$ 128.63
The Trolmaster TSH-1 Temperature / Humidity Station is a 0-10 volt analog output control station that works with the HCS-1 and HCS-2 controllers. The TSH-1 can be configured to control either a temperature or a humidity device that requires a variable 0-10 volt input signal.
The TSH-1 is capable of controlling variable speed fans, vents or any other device that accepts a 0-10 volt input. It features separate day and night “idle” speed settings built-into the TSH-1 as well as separate Day / Night setpoints accessed through the HCS controller.
Trolmaster
TrolMaster Hydro X WD-1 Water Detector + Touch Spot for watering confirmation
$ 77.18
$ 77.18
The optional Water Detector WD-2 allows the user to detect water leaks or water on the floor of the facility. Simply place the water sensor at floor level (or wherever you want to watch out for water leaks). Up to 5 Water detectors can be connected to a single Hydro-x controller. If ANY of the sensor detects a water leak, the unit will send a user-alert to notify user of a water leak.
Trolmaster
TrolMaster Hydro X WD-2 Water Detector
$ 72.00
$ 72.00
The optional Water Detector WD-2 allows the user to detect water leaks or water on the floor of the facility. Simply place the water sensor at floor level (or wherever you want to watch out for water leaks). Up to 5 Water detectors can be connected to a single Hydro-x controller. If ANY of the sensor detects a water leak, the unit will send a user-alert to notify user of a water leak.
Trolmaster
Trolmaster Hydro X 4RS-1 Outlet Expansion Module For Grow Room Control
$ 152.25
$ 152.25
The 4RS-1 is a universal 4-outlet power expansion module. It can be used with any of TrolMaster’s “plug-in” style device modules to expand the number of devices that can be controlled by the Hydro-x. A single 120-240 volt “trigger” cable on the 4RS-1 connects to your device / control module. When the device module is activated by the Hydro-x, the 4RS-1 trigger cable will turn on each of the 4 receptacles on the 4RS-1 with a 3 second time delay between each outlet being activated. That minimizes high start-up (inrush current) and allows up to 4 devices to be safely controlled. The 4RS-1 must be installed with a 120/240 volt power circuit (up to 50-amps @ 240vac). Three wire terminals inside the unit accept up to #6 AWG wire making connections to the power source easy.
Trolmaster
Trolmaster Hydro X DSC-1 CO2 Device Station For Grow Room Control
$ 73.50
$ 73.50
Our Story: Forever Green is one of the largest US distributors of TrolMaster products. We ship direct from our warehouse (no drop shipping). 60 day returns with free expedited ground shipping to the lower 48 states. And low cost expedited shipment worldwide.
The TrolMaster DSC-1 CO2 control / device module allows user the to easily connect and control standard supplemental CO2 devices or CO2 exhaust controls to the Hydro-x. Any CO2 device that is 10-amps @ 120 volts or less can be controlled by the DSC-1.
Trolmaster
Trolmaster Hydro X DSH-1 Humidity Device Station
$ 73.50
$ 73.50
LED Power Indicator
RJ12 Cable Socket
Addressing
Plug & Play
The TrolMaster DSH-1 Humidity control / device modules allow user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. The DSH modules are rated at 10-amps. *Use with dehumidifiers less than 7 amps to avoid current overload.
Package Contents:
1 x Device Station
1 x 16ft RJ12 Cable
1 x 4ft RJ12 Cable
1 x RJ12 T-Splitter
Specifications:
Input Voltage: 100~240 VAC, 50/60Hz
Output Current: 10A
Output Voltage: 100~240 VAC, 50/60Hz
Working Environments: Temperature 32-122°F, Humidity=90%
Package Dimensions: 3.3(L) x 3(W) x 3.5(H) in
G.W. per pack: 12 oz
Trolmaster
TrolMaster Hydro X DSV-1 Low Voltage Control Station
$ 82.95
$ 82.95
The Trolmaster DSV-1 is a low-voltage output module that can be used on the HCS-1, HCS-2 controllers. The DSV-1 can be addressed to be used as a temperature, humidity, CO2, or timer device module.Multiple voltage outputs are selectable by the user. The DSV-1 can output either 12 or 24 VDC up to .5 amps, or 12 or 24 VAC up to 4.8VA. Once the module is configured it will activate the low-volt device wired to the DSV-1.This allows the user to directly connect low voltage devices such as solenoids, valves, audio visual alarms or any other device that requires 12 to 24 volt AC or DC power to operate.
Trolmaster
TrolMaster Hydro X HCS 1 Hydro X Grow Room Controller
$ 335.00
$ 345.45
The Hydro-X modular system is easy to install and expand, and can be fully customized to your needs. With the free TrolMaster App, you can access all system settings and alerts from anywhere, anytime.
The Hydro-X system is compatible with most grow lights brands, HVAC systems, mini-split air conditioners, commercial dehumidifiers and humidifiers, as well as CO2 generators or regulators. So whether you're looking to maintain optimal growing conditions in your indoor garden the Hydro-X system has you covered.
Includes the 3 in 1 sensor bundle and RJ12/16 cables. A turn-key environmental sensor system to tune up your gardens success.
This controller is as user friendly as it gets, and installing and setting it up is simple. It's compatible with just about every major grow light, HVAC system, dehumidifier/humidifier, and even CO2 system. You can use the free TrolMaster app, and achieve complete control of your grow room remotely, freeing you from the grow room and getting you back to doing the things you enjoy.
What's Included With The Hydro-X System:
Hydro-X Environment Controller (x1)
3-in-1 Sensor for Temperature, Light, and Humidity (x1)
RJ12 Cable Set (x1)
Male-to-Male 16ft RJ12 Cable (x1)
Male-to-Male 4ft RJ12 Cable (x1)
RJ12 T-Splitter (x1)
Achieve Complete Grow Room Control With The Hydro-X
With one piece of equipment, you can essentially control anything you need in your grow room. There are more than 17 separate types of control modules, granting you the ability to connect the Hydro-X to A/C's and HVAC
To put it simply, the TrolMaster Hydro-X Environment Controller With 3-in-1 Sensor is the most intelligent and versatile system on the market.
The Hydro-X System Features A Modular Design
Another great feature of the Hydro-X Environment Control System is that you can control and customize every last detail of the controller. The modular design means you can configure the separate components in unique ways to create the best environment for your plants because every grow is different.
You can control up to 512 different grow lights on two separate channels, and operate different systems simultaneously. Just about every lighting brand and product on the market is compatible with the Hydro-X with different adapters.
LMA-11 for Phantom - Lighting Adapter P
LMA-12 for Dimlux - Lighting Adapter D
LMA-13 for Sun System - Lighting Adapter S
LMA-14 Lighting Adapter F for most brands and also FGI brand LEDs
LMA-15 for DLI - Lighting Adapter DLI
LMA-T for ThinkGrow - Lantern Schedule Adapter F
The LMA-14 Adapter can be used for 24 Drivers (LEDs) or 40 Ballasts with either the HCS-1 or HCS-2 Hydro-X controllers. Both the Hydro-X Controllers have 2 line lights giving the ability to control double the amount of each type of light (48 LEDs and 80 Ballasts).
Trolmaster
TrolMaster Hydro X HS-1 Humidistat Station controls dehumidifiers
$ 128.63
$ 128.63
The HS-1 Humidistat Station from TrolMaster is used to control commercial dehumidifiers. Most larger / commercial dehumidifiers have a “low-volt” control option so the dehumidifier can be controlled by an external humidistat. The HS-1 works and is wired exactly like an external humidistat. The HS-1 is the best way to control your dehumidifiers by eliminating the need to control the high-amperage / inrush current associated with dehumidifiers.
LCD Display, Easy Operation
Seamless Connection with Hydro-X
Micro-SD for Firmware Upgrade
Address Assignment
Plug & Play
Package Includes:
1 x Humidistat Station (HS-1)
1 x 16ft RJ12 Cable
1 x 4ft RJ12 Cable
1 x RJ12 T-Splitter
Specifications:
Output Voltage: 24V
Maximum Current: 1A
Working Environment: Temperature 32-122°F, Humidity=90%
Packaging Dimensions: 160mm(L) x 86mm(W) x 86mm(H)
Trolmaster
TrolMaster Hydro X LMA-14 Lighting Adapter F for 0-10V control of grow lights.
$ 58.25
$ 61.10
The LMA-14 lighting adapter is specially designed to control a wide variety of lighting systems including FGI brand LEDs and HIDs.
TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.
Trolmaster
TrolMaster Hydro X LMA-G Group Control Lighting Adaptor, for Grouping ThinkGrow Model-I LEDs
$ 95.55
$ 95.55
LMA-G is specially designed to be used with ThinkGrow Model-I and I Plus. The LMA-G needs to be connected with a lighting control adaptor to offer a group control function to the grow lights. Each LMA-G can control one group of lights./ Each light group requires one LMA-G.
TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.
Designed for ThinkGrow Single-bar LED fixtures.
LMA-G Technical Sheet Dowload
Trolmaster
TrolMaster Hydro X LMA-T Lighting Adapter For ThinkGrow LEDs
$ 95.55
$ 95.55
TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.
The LMA-T works specifically with the ThinkGrow LED systems to provide two channel control, which allows separate control for full spectrum and second red output levels on the ThinkGrow LEDs.
The LMA-T simply connects to the lighting control ports Line 1 and Line 2 on the HCS-1. Once connected, the user can then set individual ON and OFF times and the dimming settings for the full spectrum LEDs and also for the second red LEDs.
The LMA-T then is connected to the RJ type lighting control cables where each of the LEDs are connected back to the controller in a daisy-chain configuration using plug-and-play connections.
One adaptor could run up to 256 ThinkGrow LEDs.
1x LMA-T
1x RJ12 to customized waterproof connecter
* Convert RJ12 to Water Proof Connector Cable included.
Trolmaster
TrolMaster Hydro X MBS-PAR Full Spectrum Quantum Sensor
$ 488.25
$ 488.25
The Full Spectrum Quantum Sensor (MBS-PAR) provides accurate and cost-effective measurement of photosynthetically active radiation (PAR) from all light sources used to grow plants. The full-spectrum quantum sensor has a spectral range of 389 to 692 nm ± 5 nm. The improved spectral response increases the accuracy of LED measurements. Used in conjunction with the Hydro-X controller, the PPFD sensor will AUTOMATICALLY increase or decrease the output level of your supplemental lighting systems to continuously maintain the exact lighting level (in PPFD) that the user selects.
Trolmaster
TrolMaster Hydro X MBS-PRO Hydro-X Temp/Humid/CO2/Light 4-in-1 Sensor
$ 439.00
$ 439.00
The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) sensor and photocell to create the perfect all-in-one environmental sensor. It is designed for Hydro-X Pro system only.
Assembled using a new water-resistant plastic injected enclosure, the MBS-PRO can be placed in multiple locations throughout the growing area to provide spot measurements from multiple sensors (Up to 50 sensors can be connected to the Hydro-X Pro) The sensors can then be used together (averaged) or separately in order to control a specific section of the grow area by assigning a sensor to a specific control device. The MBS-PRO features a built-in LCD display to show the current conditions of that sensor which provide the ease of onsite monitoring. It also features a new “push-lock” connection to make installation easy.Please Note: The MBS-Pro requires the SPH-1 for supplemental power. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"
Trolmaster
TrolMaster Hydro X MBS-S8 CO2 Sensor measures CO2 in grow rooms.
$ 233.00
$ 233.00
Description
The optional CO2 Sensor (MBS-S8) measures the CO2 PPM within the growing area. Using the MBS-S8 allows the users to connect and control their supplemental CO2 system using the Hydro-X.
*Used in combination with one or more DSC-1 CO2 device modules.
Trolmaster
TrolMaster Hydro X TS-2 Thermostat Station
$ 128.20
$ 128.20
The TS-2 thermostat stations is designed to replace a thermostat connected to a standard HVAC unit. The TS-2 can be used to control most HVAC systems including heat pump and multi-stage HVAC systems. The TS-2 is wired to the HVAC system using the same low-voltage thermostat cable, and has the standard color-coded wiring as most thermostats. The Hydro-x allows separate Day and Night settings for each of up to (4) TS modules, so multiple HVAC systems can be controlled by a single Hydro-X system. The TS-2 also has an adjustable delay time for each HVAC systems being activated. That minimizes high start-up (inrush current) and allows up to 4 HVAC systems to be safely controlled.
LCD Display, Easy Operation
Seamless Connection with Hydro-X
Micro-SD for Firmware Upgrade
Address Assignment
Plug & Play
Trolmaster
Trolmaster Hydro-X ECS-2 Lighting Adapter RJ12 to screw down terminals universal convertor manual wiring
$ 22.05
$ 22.05
Overview
The ECS-2 cable set is designed to connect Hydro-X to most LED drivers with bare wire +/- wiring. (not necessary when buying the LMA-14 which now includes a screw down adapter).
For connecting to a Hydro X HCS-1 or 2. Use with FGI Uniformity Pro 640 & Uniformity Pro Flex (when not using the WiFi controller), FGI Lightpanel 500 (requires a Cat6 adapter plug).
Most LED drivers have a pair of + and - wires which control dimming functions. This adapter set provides a simple screw down wiring terminal with a 3.5mm jack connector and RJ-12 extension wiring allowing simple connection from your LED to the Hydro-X controller.
The ECS-2 comes with a 16 ft RJ12 cable, a Y-splitter and a special 4 ft RJ12 / 3.5mm jack cable. The special cable connects to your lighting fixture / LED driver using the two-screw terminal block to connect to loose wires on the LED driver. Simply connect the two wires from your LED driver to the terminal block, each of the lights being controlled are wired in a “daisy-chain” configuration back to the Hydro-X LMA adapter.
~specifications~
1 x 16 ft RJ12 Cable
1 x 4 ft RJ12 to 3.5 Jack Cable
1 x T-shaped Splitter
1 x 3.5mm Female Barrel Connector
Trolmaster
TrolMaster Hydro-X LMA-11 Lighting Control Adaptor P for control Phantom Ballast
$ 61.16
$ 61.16
TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.
Trolmaster
TrolMaster Hydro-X LMA-12 Lighting Control Adaptor D (to control Dimlux Ballast)
$ 61.16
$ 61.16
TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.
This Lighting Control Adapter D (LMA-12) is specially designed for controlling D ballast.
Trolmaster
TrolMaster Hydro-X LMA-13 Lighting Control Adapter S, for Controlling Sun System Ballast
$ 61.16
$ 61.16
TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.
Trolmaster
TrolMaster Hydro-X LMA-T Lighting Control Adaptor T for control ThinkGrow LED
$ 95.55
$ 95.55
TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.
The LMA-T works specifically with the ThinkGrow LED systems to provide two channel control, which allows separate control for full spectrum and second red output levels on the ThinkGrow LEDs.
The LMA-T simply connects to the lighting control ports Line 1 and Line 2 on the HCS-1. Once connected, the user can then set individual ON and OFF times and the dimming settings for the full spectrum LEDs and also for the second red LEDs.
The LMA-T then is connected to the RJ type lighting control cables where each of the LEDs are connected back to the controller in a daisy-chain configuration using plug-and-play connections.
One adaptor could run up to 256 ThinkGrow LEDs.
* Convert RJ12 to Water Proof Connector Cable included.
Trolmaster
TrolMaster LMA-15 Hydro-X Lighting Control Adapter DLI for Hydro-X Control System
$ 61.16
$ 61.16
TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.
Trolmaster
TrolMaster Tent X Tent-X Main Controller with 3-in-1 Sensor. Free Phone App.
$ 316.95
$ 316.95
TrolMaster’s Tent-X Base Station (TCS-1) is a state-of-the-art professional-grade and modularly designed environmental and irrigation control system. It is designed for single-zone grow tents. Thanks to the controller’s compact hydroponic capabilities, it allows the user to effectively control their tent’s environmental parameters and irrigation schedule with a single control system.
Whats Included With The Hydro-X System:
Tent-X Environment Controller (x1)
3-in-1 Sensor for Temperature, Light, and Humidity (x1)
RJ12 Cable Set (x1)
Male-to-Male 16ft RJ12 Cable (x1)
Male-to-Male 4ft RJ12 Cable (x1)
RJ12 T-Splitter (x1)