Buy your next SOLUS from the largest AROYA distributor in the US. Use our promo code to save today.  Yield. Quality. You always want more. If you’re a serious grower — even at home – you’re never not ready for big data and analytics. To grow better, you must first know better, and there’s no tool like SOLUS to mine your substrate for insights and help your harvest flourish. Use the SOLUS for easy and quick spot measurements of your substrate, no datalogging required and no information is retained. Water. Temp. EC. All impact the quality and yield of your crop. To level up your home growing requires precision at every stage, across every variable. With SOLUS, you’re in control of it all. Reap a harvest full of insights right on your phone. Simple to download, and even simpler to detect your sensor.  Learn About EC  Mine the insights buried in your substrate The SOLUS Sensor Kit combines the industry’s top soil sensor with a wireless analysis powerhouse. Together with the free SOLUS by AROYA app, they enable high-precision water content, temperature and electrical conductivity spot checks. The information SOLUS gathers helps growers maximize their substrate and unlock maximum yield potential. Learn more about the Solus on our YouTube Channel here:  Quality Legendary sensor technology The product of more than 20 years of soil moisture research and technological refinement, the TEROS 12 sensor is trusted by scientists, farmers and growers alike. The TEROS 12’s ruggedized body lasts ten years or more. Its stainless-steel sensor needles slide easily into any substrate. It even ships with a free reusable sensor installation tool to help growers align the sensor perfectly for consistent, accurate measurements. INCLUDES One TEROS 12 Sensor  One ZSC Handheld Bluetooth Module For App Connectivity APP Download - search AROYA SOLUS on the Apple or Android App stores FEATURES Quick and easy WC, EC and temp spot-checks Secure – won’t store data or monitor measurements over time Wirelessly pairs with any iOS or Android mobile device using Bluetooth Easy installation with installation tool Steel needles cut through the soil for better soil-sensor contact Robust, epoxy body for tough field conditions Dependable, long-life sensor Large volume of influence Ferrite core eliminates cable noise Device Operating System Compatibility and System Requirements The mobile device must be capable of using Bluetooth® Low Energy (BLE). The mobile device operating system compatibility is Apple iOS 10 or greater and Android OS 4.3 or greater. NOTE: Location services must be enabled to use the Bluetooth capabilities of the ZSC. This is a requirement set by the Android operating system (OS). Aroya Solus Manual and Guides Downloads TEROS 12 Operation Manual Download Link  Aroya Solus Quickstart guide Aroya Solus Troubleshooting guide  Aroya ZCS Module Quickstart guide

Description The optional CO2 Sensor (MBS-S8) measures the CO2 PPM within the growing area. Using the MBS-S8 allows the users to connect and control their supplemental CO2 system using the Hydro-X. *Used in combination with one or more DSC-1 CO2 device modules.

Our Story: Forever Green is one of the largest US distributors of TrolMaster products. We ship direct from our warehouse (no drop shipping). 60 day returns with free expedited ground shipping to the lower 48 states. And low cost expedited shipment worldwide. The TrolMaster DSC-1 CO2 control / device module allows user the to easily connect and control standard supplemental CO2 devices or CO2 exhaust controls to the Hydro-x. Any CO2 device that is 10-amps @ 120 volts or less can be controlled by the DSC-1.

The TrolMaster DST-1 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps at 120 volts or less can be controlled by the DST-1.

The TrolMaster DSP-1 program device module (timer module) works like a multi-function timer. The DSP-1 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x.  Any device that is 10-amps at 120 volts or less can be controlled by the DSP-1.

Our Story: Forever Green is one of the largest US distributors of TrolMaster products. We ship direct from our warehouse (no drop shipping). 60 day returns with free expedited ground shipping to the lower 48 states. And low cost expedited shipment worldwide. The ARS-1 mini-split air conditioner controller is a unique product that solves the age-old problem of having separate day and night temperature settings on your mini-split air conditioners. The ARS-1 is a universal controller that works with most mini-split air conditioners (and some window-type AC units too), as long as the unit came with an IR / infrared remote controller. We use the remote control that came with the unit to “teach” those IR signals to the ARS-1 module. Once the ARS-1 “learns” those remote control codes, the ARS-1 will send those same signals to the indoor mini-split head unit changing the setpoint to the desired Day or Night temperature setting automatically base on the photocell sensor status.

The TS-2 thermostat stations is designed to replace a thermostat connected to a standard HVAC unit. The TS-2 can be used to control most HVAC systems including heat pump and multi-stage HVAC systems. The  TS-2 is wired to the HVAC system using the same low-voltage thermostat cable, and has the standard color-coded wiring as most thermostats. The Hydro-x allows separate Day and Night settings for each of up to (4) TS  modules, so multiple HVAC systems can be controlled by a single Hydro-X system. The TS-2 also has an adjustable delay time for each HVAC systems being activated. That minimizes high start-up (inrush current) and allows up to 4 HVAC systems to be safely controlled. LCD Display, Easy Operation Seamless Connection with Hydro-X Micro-SD for Firmware Upgrade Address Assignment Plug & Play 

3-in-1 Temp/Humid/Light sensor for the Hydro-X system. Note: This is a replacement or spare part. The main controller comes with a sensor already. Note: This is a replacement or spare part. The main controller comes with a sensor already. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"

The ECS-5 provides a 5/8” diameter connector for some of Fluence brands newer LED fixtures using PushLock Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-5 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / PushLock Waterproof Connector cable.

  Overview  The ECS-2 cable set is designed to connect Hydro-X to most LED drivers with bare wire +/-  wiring. (not necessary when buying the LMA-14 which now includes a screw down adapter).  For connecting to a Hydro X HCS-1 or 2. Use with FGI Uniformity Pro 640 & Uniformity Pro Flex (when not using the WiFi controller), FGI Lightpanel 500 (requires a Cat6 adapter plug). Most LED drivers have a pair of + and - wires which control dimming functions. This adapter set provides a simple screw down wiring terminal with a 3.5mm jack connector and RJ-12 extension wiring allowing simple connection from your LED to the Hydro-X controller.  The ECS-2 comes with a 16 ft RJ12 cable, a Y-splitter and a special 4 ft RJ12 / 3.5mm jack cable. The special cable connects to your lighting fixture / LED driver using the two-screw terminal block to connect to loose wires on the LED driver. Simply connect the two wires from your LED driver to the terminal block, each of the lights being controlled are wired in a “daisy-chain” configuration back to the Hydro-X LMA adapter. ~specifications~ 1 x 16 ft RJ12 Cable 1 x 4 ft RJ12 to 3.5 Jack Cable 1 x T-shaped Splitter 1 x 3.5mm Female Barrel Connector  

The TrolMaster DCC-1 provides a simple solution to control a single device, with more than one condition. For example, people like to turn on their exhaust fans when either temp or humidity is too high; shut off CO2 when turn on exhaust fans. There are many other examples where two conditions can be either combined or split. The DCC-1 is designed to be used in combination with one of TrolMaster’s plug-in style module. (DSC-1, DSH-1/2, DST-1/2 and DSP-1). Once connected to the plug-in module using the RJ12 cable built-into the DCC-1, the DCC-1 will act in concert with that plug-in module to control whatever device is connected to the plug-in module. The DCC-1 can also be set to work in two distinct ways using the “Interlock” function.INTERLOCK OFF: When the DCC-1 interlock is set to be off, EITHER condition that are associated with that pair of modules that are being used together can be activated individually for the device to be activated. (modules used in “parallel”)Examples from above for interlock OFF would be: Turn on an exhaust fan to reduce temp or humidity.Turn on an exhaust fan at night using a recycling timer OR when Humidity is too highINTERLOCK ON: When the DCC-1 Interlock is selected to be on, BOTH conditions that are associated with that pair of modules that are being used together must be activated TOGETHER in order for the device to be activated. (modules used in “series”)Examples from above for interlock ON would be: Shut off a CO2 device when an exhaust fan is runningShut off lights if the temperature gets too warm within the area.

Buy a Teros 12 sensor from the largest AROYA distributor in the US.  The Teros 12 3 in 1 sensor. New model integrates an 12” lead with a male mini-stereo jack connector for SDI-12 data interchange.  New. Meter Group Inc, Made in the USA. Authorized distributors.  About Water. Temp. EC. All impact the quality and yield of your crop. To level up your home growing requires precision at every stage, across every variable.  Learn About EC Learn more about the Solus on our YouTube Channel here:  Quality Legendary sensor technology The product of more than 20 years of soil moisture research and technological refinement, the TEROS 12 sensor is trusted by scientists, farmers and growers alike. The TEROS 12’s ruggedized body lasts ten years or more. Its stainless-steel sensor needles slide easily into any substrate. It even ships with a free reusable sensor installation tool to help growers align the sensor perfectly for consistent, accurate measurements. Includes One TEROS 12 Sensor  Connection: Mini-stereo plug. Male.  Cable length: 12"    Teros 12 Data Sheet  TEROS 12 Operation Manual Download Link   

The optional Smoke Detector (MBS-SD) can alert the user to smoke within their growing area at ALL TIMES. Up to 5 smoke detectors can be connected to a single Hydro-x controller. If ANY of the smoke detectors determine there is smoke in the area, the user will receive a user-alert on their phone to alert them to the potential problem BEFORE the problem gets out of hand. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"

The Hydro X Plus / HCS-3 system is a professional-grade single-zone environmental control system that can control your entire grow space. Beautiful touch screen display.  It has an 800x480 7” LED display monitor and can control an unlimited number of lights, 8 temperature devices, 8 humidity devices, 4 CO2 devices, and 12 programmable timer devices (up to 50 schedules can be created). With incredible flexibility and the expanded product capacity, anyone can now easily customize their own grow room control system for maximum yields. Having multiple control modules also provides the option for the user to create multiple "stages" of growth. By staggering the start times of each stage, the user can minimize the amount of time that plants spend in vegetative growth and focus on the flowering phase. Having multiple control modules also provides the option for the user to create multiple "stages" of temperature and humidity control, which will provide a more stable environment. The HCS-3 system comes with an MBS-PRO 4-in-1 sensor to measure temperature, humidity, CO2 ppm, and the presence of light. Lighting control has never been easier or more capable. The optional MBS-PAR light sensor can be added to the system. It will automatically adjust light intensity to precisely provide the exact amount of illumination for optimum plant growth. The Hydro-X Plus has been can also track your DLI levels. Having 2 separate lighting control channels allows the user to create multiple lighting layouts (and dimming sequences) based on their individual preferences. Besides controlling your room, if a problem is detected by the HCS-3, a warning message (notification) will be sent to your smartphone. Up to 10 smoke detectors and 10 water leak-detectors can be connected to the HCS-3 which will alert you if there are any fire or water leaks. The HCS-3 also offers multiple advanced functions to control your entire grow room or greenhouse such as Sunrise / Sunset simulation, DLI control, overheat protection, Spectrum & Group lighting control, and more.  

The 4RS-1 is a universal 4-outlet power expansion module. It can be used with any of TrolMaster’s “plug-in” style device modules to expand the number of devices that can be controlled by the Hydro-x. A single 120-240 volt “trigger” cable on the 4RS-1 connects to your device / control module. When the device module is activated by the Hydro-x, the 4RS-1 trigger cable will turn on each of the 4 receptacles on the 4RS-1 with a 3 second time delay between each outlet being activated. That minimizes high start-up (inrush current) and allows up to 4 devices to be safely controlled. The 4RS-1 must be installed with a 120/240 volt power circuit (up to 50-amps @ 240vac). Three wire terminals inside the unit accept up to #6 AWG wire making connections to the power source easy.

LCD Display, Easy Operation Seamless Connection with Hydro-X Multiple purposes assignment Plug & Play The Trolmaster DSD-1 Dry-contact module provides a simple and flexible solution to who want to connect & control devices to the Hydro-X using a “dry-contact” or relay to activate the device. Some equipment requires either normally open or normally closed contact closure in order to activate the equipment. The DSD-1 is the product that you need to control those types of devices.* The DSD-1 can be configured to work as the other Trolmaster power modules work. The DSD-1 connects into the “devices” line on the Hydro-X and can be set to control an almost infinite number and types of devices such as:Lighting contactorsLight Deprivation curtainsPump contactorsTemperature devicesHumidity devicesCO2 devices* Consult FGI or Trolmaster for questions concerning your particular device. Package Includes: 1 x Dry Contact Station DSD-11 x 16ft RJ12 Cable1 x 4ft RJ12 Cable1 x RJ12 T-Splitter Specifications: Input Voltage: 100~240VAC, 50/60HzOutput Current: 10AOutput Voltage: 100~240VAC, 50/60HzWorking Environment: Temperature 32-122°F, Humidity=90%Packaging Dimensions: 85mm x 80mm x 90mm

The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) sensor and photocell to create the perfect all-in-one environmental sensor. It is designed for Hydro-X Pro system only.  Assembled using a new water-resistant plastic injected enclosure, the MBS-PRO can be placed in multiple locations throughout the growing area to provide spot measurements from multiple sensors (Up to 50 sensors can be connected to the Hydro-X Pro) The sensors can then be used together (averaged) or separately in order to control a specific section of the grow area by assigning a sensor to a specific control device. The MBS-PRO features a built-in LCD display to show the current conditions of that sensor which provide the ease of onsite monitoring. It also features a new “push-lock” connection to make installation easy.Please Note: The MBS-Pro requires the SPH-1 for supplemental power. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"  

The optional Water Detector WD-2  allows the user to detect water leaks or water on the floor of the facility. Simply place the water sensor at floor level (or wherever you want to watch out for water leaks). Up to 5 Water detectors can be connected to a single Hydro-x controller. If ANY of the sensor detects a water leak, the unit will send a user-alert to notify user of a water leak.

TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option. 

TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.  

TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option. 

TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.  The LMA-T works specifically with the ThinkGrow LED systems to provide two channel control, which allows separate control for full spectrum and second red output levels on the ThinkGrow LEDs.  The LMA-T simply connects to the lighting control ports Line 1 and Line 2 on the HCS-1. Once connected, the user can then set individual ON and OFF times and the dimming settings for the full spectrum LEDs and also for the second red LEDs. The LMA-T then is connected to the RJ type lighting control cables where each of the LEDs are connected back to the controller in a daisy-chain configuration using plug-and-play connections. One adaptor could run up to 256 ThinkGrow LEDs.    * Convert RJ12 to Water Proof Connector Cable included.

The optional Water Detector WD-2  allows the user to detect water leaks or water on the floor of the facility. Simply place the water sensor at floor level (or wherever you want to watch out for water leaks). Up to 5 Water detectors can be connected to a single Hydro-x controller. If ANY of the sensor detects a water leak, the unit will send a user-alert to notify user of a water leak.

TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option. This Lighting Control Adapter D (LMA-12) is specially designed for controlling D ballast.