Lumens vs PAR

Lumens are measured for human vision while PAR is a measurement for plant growth (photosynthetically active radiation). Here is why that's important. 
Lumens vs PAR

Why PAR matters. 

Lumens are for humans and PAR is for plants. And the two don't have much to do with one another. 

Lumens is a measurement of the total amount of photons being emitted by a light source. Lux is the number of photons being measured on a surface or at a specific point away from the light. This is what LUX meters are for.  

By contrast, PAR (photosynthetic active radiation) are the photon light radiation which plants "see" to photosynthesize. PAR is a quantum measurement and it cannot be easily converted to LUX. They are each their own interpretation of the photons being measured. 

So Lumens are the spectrum that our eyes perceive. The higher the Lumen the brighter the light source is to our eyes.

PAR is the spectrum that plants absorb or perceive. The higher the PAR the more intense the light source is for the plants. 

PAR is measured with a specialized quantum sensor which accurately measures PAR. Companies like Everfine, Licor, Apogee Instruments and Innoquest all produce quantum PAR meters and sensors.  

These sensors display PAR in PPFD or photosynthetic photon flux density. When you hear that someone grows 1000 umols/ms this means their PAR level is 1000 PPFD. 

PAR levels change over distance from the light being measured. If you increase the distance from the light PPFD will drop dramatically. This is because an artificial light source produces a limited amount of photons as compared to the sun. These photons don't always shoot straight out of a light. They shoot in many directions. PAR typically drops by 50% for every 12" of distance away from an artificial light source. These are wasted or lost photons that the plant will benefit far less from. 

Cannabis in the flowering stage of growth does best between 800-1000 PPFD. If supplemental C02 is added to the grow area plants can tolerate up to 1500 PPFD. Veg plants on the other hand prefer light levels between 250-400 PPFD. And clones and baby seedlings can't tolerate much more than 100 PPFD. 

An additional consideration in lighting layout for grow is what is called crossover. This is the area between two light sources where the light from each source crosses over. These are the photons that shoot at an angle and are still beneficial to the plants. Crossover is an important consideration and can significantly improve PPFD levels. Lighting layout that considers the distance between fixtures based on the amount of PPFD each light can produce allows light loss to be recaptured creating less wasted photons and more beneficial light for your plants. 

There are many different types of lamps in the market today. Some are better than others at distributing energy evenly. 

As always, any questions you have about this or any other blog you see here, please contact us at shop@forevergreenindoors.com and we are happy to help you!

Premium Quality For Growing

More Products

Sold out -6% sale
Trolmaster HCS-2 Hydro-X Pro Control System
Trolmaster
Trolmaster HCS-2 Hydro-X Pro Control System $ 2,374.00 $ 2,499.00
  10.1' Touchscreen Fully Customizable  Free Smart Phone App plus Web-base control system TrolMaster revolutionized environmental controller technology when it introduced the Hydro-X. The Hydro-X Pro continues the revolution with a 10’ touch-screen and a web-based software. The Hydro-X Pro is backwards compatible with all current Hydro-X control / device modules. It also provides greater flexibility and allows any plug-in module to be addressed to be whatever the user wants. The user can also set up each plug-in module to have multiple “conditions” that will activate the module, allowing for almost unlimited control options. The Hydro-x Pro is designed to be a single room controller for reliability and ease-of-use. The Hydro-X Pro expands the capability of the original Hydro-X by allowing up to 50 sensors and up to 50 separate control modules to be connected to a single Hydro-X Pro. Multiple sub-zones can be created within the single grow space by linking a specific sensor, to a specific control function(s).The new 4-in-1 sensor comes with a LCD screen which provide the ease of onside monitoring. Customized programming allows almost limitless degree of control. Each of the variables (Temperature, Humidity, CO2, Light) can be controlled independently, meaning a customized ramp-up / ramp-down can be used to closely simulate natural outdoor conditions, or simply allow complete customization of the environment. Displayed on an easy-to-read and construct “graph” it allows the user to have 100% control of their environment. Another powerful feature of the Hydro-X Pro is the built-in calendar and calendar presets that allows the user to schedule an entire crop’s “recipe” within the Hydro-X Pro. All settings including Lighting, Temperature, Humidity, CO2, and Timers can be specified by the user as they “build” their multi-week crop schedules. Reminders can also be programmed to ensure critical tasks are not forgotten. The TrolMaster APP will also allow for notifications with separate day/night limits to be received by the user. The web-based software provides easy access and more advanced remote control. Onboard data acquisition and the ability to store and share setting between multiple devices, means that user-defined programs & settings can be saved and loaded into multiple Hydro-X Pro units with ease. A personalized screensaver page can be uploaded through a USB port. The same upgradeable feature like Hydro-X gives you the ability for life-time improvements. Included: 1x HCS-2 Controller 1x MBS-Pro Sensor 1x Mounting Plate 1x RJ12 Cable Set
-1% sale
TrolMaster Hydro X Plus HCS-3 Grow Room Controller
Trolmaster
TrolMaster Hydro X Plus HCS-3 Grow Room Controller $ 1,195.00 $ 1,199.00
The Hydro X Plus / HCS-3 system is a professional-grade single-zone environmental control system that can control your entire grow space. It has an 800x480 7” LED display monitor and can control an unlimited number of lights, 8 temperature devices, 8 humidity devices, 4 CO2 devices, and 12 programmable timer devices (up to 50 schedules can be created). With incredible flexibility and the expanded product capacity, anyone can now easily customize their own grow room control system for maximum yields. Having multiple control modules also provides the option for the user to create multiple "stages" of growth. By staggering the start times of each stage, the user can minimize the amount of time that plants spend in vegetative growth and focus on the flowering phase. Having multiple control modules also provides the option for the user to create multiple "stages" of temperature and humidity control, which will provide a more stable environment. The HCS-3 system comes with an MBS-PRO 4-in-1 sensor to measure temperature, humidity, CO2 ppm, and the presence of light. Lighting control has never been easier or more capable. The optional MBS-PAR light sensor can be added to the system. It will automatically adjust light intensity to precisely provide the exact amount of illumination for optimum plant growth. The Hydro-X Plus has been can also track your DLI levels. Having 2 separate lighting control channels allows the user to create multiple lighting layouts (and dimming sequences) based on their individual preferences. Besides controlling your room, if a problem is detected by the HCS-3, a warning message (notification) will be sent to your smartphone. Up to 10 smoke detectors and 10 water leak-detectors can be connected to the HCS-3 which will alert you if there are any fire or water leaks. The HCS-3 also offers multiple advanced functions to control your entire grow room or greenhouse such as Sunrise / Sunset simulation, DLI control, overheat protection, Spectrum & Group lighting control, and more.  
Sold out -6% sale
Trolmaster MBS-PAR Quantum Sensor for Hydro-X Pro
Trolmaster
Trolmaster MBS-PAR Hydro-X Full Spectrum Quantum Sensor $ 417.95 $ 442.00
The Full Spectrum Quantum Sensor (MBS-PAR) provides accurate and cost-effective measurement of photosynthetically active radiation (PAR) from all light sources used to grow plants. The full-spectrum quantum sensor has a spectral range of 389 to 692 nm ± 5 nm. The improved spectral response increases the accuracy of LED measurements. 
Sold out -6% sale
Trolmaster MBS-Pro Quantum Sensor for Hydro-X Pro
Trolmaster
Hydro X SuperstoreTrolmaster MBS-PRO Hydro-X Temp/Humid/CO2/Light 4-in-1 Sensor for Hydro-X Pro $ 377.95 $ 399.00
The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) sensor and photocell to create the perfect all-in-one environmental sensor. It is designed for Hydro-X Pro system only.  Assembled using a new water-resistant plastic injected enclosure, the MBS-PRO can be placed in multiple locations throughout the growing area to provide spot measurements from multiple sensors (Up to 50 sensors can be connected to the Hydro-X Pro) The sensors can then be used together (averaged) or separately in order to control a specific section of the grow area by assigning a sensor to a specific control device. The MBS-PRO features a built-in LCD display to show the current conditions of that sensor which provide the ease of onsite monitoring. It also features a new “push-lock” connection to make installation easy.Please Note: The MBS-Pro requires the SPH-1 for supplemental power. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"  
-9% sale
TrolMaster HCS-1 Controller w/3-in-1 Sensor Bundle
Trolmaster
TrolMaster HCS-1 Controller w/3-in-1 Sensor Bundle $ 299.95 $ 329.00
If you're looking for a complete, professional-grade environmental control system, the TrolMaster Hydro-X is the perfect solution. This modular system is easy to install and expand, and can be fully customized to your needs. With the free TrolMaster App, you can access all system settings and alerts from anywhere, anytime. The Hydro-X system is compatible with most grow lights brands, HVAC systems, mini-split air conditioners, commercial dehumidifiers and humidifiers, as well as CO2 generators or regulators. So whether you're looking to maintain optimal growing conditions in your indoor garden or keep your home comfortable all year round, the Hydro-X system has you covered. Includes the TrolMaster 3 in 1 sensor bundle and RJ16 cables. A turn-key environmental sensor system to tune up your gardens success.  Looking for a trusted high volume TrolMaster Official Distributor in North America? Look no further than Forever Green Indoors! We're the leading provider of quality TrolMaster products and accessories, and we're here to help you keep your indoor spaces looking their best.We've got everything you need to keep your plants healthy and green, from TrolMaster controllers and sensors to PAR meters and EC sensors. And we're always happy to offer advice and assistance to make sure you get the most out of your TrolMaster products.So if you're looking for top-quality TrolMaster products and accessories, plus expert advice and support, come to Forever Green Indoors - we're your one
-5% sale
Trolmaster MBS-S8 Hydro-X CO2 Sensor - Accessory for HCS-1 Controller
Trolmaster
Trolmaster MBS-S8 Hydro-X CO2 Sensor - Accessory for HCS-1 Controller $ 210.90 $ 222.00
 Description The optional CO2 Sensor (MBS-S8) measures the CO2 PPM within the growing area. Using the MBS-S8 allows the users to connect and control their supplemental CO2 system using the Hydro-X. *Used in combination with one or more DSC-1 CO2 device modules.
-5% sale
Trolmaster  4RS-1 4 Outlet Expander Station
Trolmaster
Trolmaster 4RS-1 4 Outlet Expander Station $ 137.75 $ 145.00
The 4RS-1 is a universal 4-outlet power expansion module. It can be used with any of TrolMaster’s “plug-in” style device modules to expand the number of devices that can be controlled by the Hydro-x. A single 120-240 volt “trigger” cable on the 4RS-1 connects to your device / control module. When the device module is activated by the Hydro-x, the 4RS-1 trigger cable will turn on each of the 4 receptacles on the 4RS-1 with a 3 second time delay between each outlet being activated. That minimizes high start-up (inrush current) and allows up to 4 devices to be safely controlled. The 4RS-1 must be installed with a 120/240 volt power circuit (up to 50-amps @ 240vac). Three wire terminals inside the unit accept up to #6 AWG wire making connections to the power source easy.
5% sale
TrolMaster TSH-1 Temperature / Humidity Station
Trolmaster
TrolMaster TSH-1 Temperature / Humidity Station $ 122.50 $ 116.38
  The Trolmaster TSH-1 Temperature / Humidity Station is a 0-10 volt analog output control station that works with the HCS-1 and HCS-2 controllers. The TSH-1 can be configured to control either a temperature or a humidity device that requires a variable 0-10 volt input signal. The TSH-1 is capable of controlling variable speed fans, vents or any other device that accepts a 0-10 volt input. It features separate day and night “idle” speed settings built-into the TSH-1 as well as separate Day / Night setpoints accessed through the HCS controller.

60 DAYS EASY RETURNS

FREE US SHIPPING

FAST CHECKOUT

SAME DAY FULFILLMENT

(Orders before 11am pst)