Model-H Plus is a true 5’ wide LED grow light designed to be used in indoor grow rooms for high PPFD cultivation practices in vertical farming. The fixture has a total of 3368 pieces of highly efficient top-bin diodes with a total wattage upgraded to 720 watts and producing 2061 total PPF output. Users can have onboard dimming or adjust the spectrum and light intensity by connecting the fixtures with a controller. Four spectrum channels including UV, White (full spectrum), Deep Red and Far Red are fully controllable to customize your desired spectrum/recipe of light your plants need. (Only available on the TrolMaster HCS-2/3). The patented plug-and-play light bar design also offers ease of installation and facilitates future maintenance. Key Features: Wide Coverage: Designed to cover 4' wide grow racks or tables efficiently. High Efficiency:  Equipped with 2888 top-bin LED diodes. Total wattage of 740 watts. Achieves an 18% increase in PPF performance over the original Model-H LED. Adjustable Lighting: Onboard dimming for easy intensity adjustments. Connectable to a controller for precise spectrum and light intensity adjustments. Spectrum Control: Four controllable spectrum channels: 380NM UVA, White Full Spectrum, 660nm Red and 730 nm Far Red.  Customizable light spectrum/recipes tailored to plant needs (Spectrum Control available with HCS-2/3). ThinkGrow Model H Spectrum  Benefits: Enhanced Plant Growth: The ability to customize light recipes helps in optimizing plant growth for different stages, leading to better yields. Energy Efficiency: High-efficiency diodes reduce energy consumption while maximizing light output. Versatility: Suitable for various growing environments and applications.User-Friendly: Easy installation and maintenance save time and reduce operational complexity. This new model is a significant upgrade from the original Model-H, offering improved performance and greater flexibility for serious growers looking to optimize their cultivation setup. ThinkGrow New Model H DLC #: Product ID: H-OPZHXB Tech Sheet Download Spec Sheet Download Product Manual Download Box includes:  1x Model-H Driver8x Model-H LED Light Bars1x 12' 240V Power Cord Wattage Draw (Tested):  741.3W (20 watts Far Red) PPF (Tested):  2061 Efficacy (Tested):  2.78 umols/j Power Factor (Tested):  >=.96% Fixture Dimensions 45" (L) x 44.6" (W) x 4.44" (H)  Lifetime:  L90 : >54,000 hrs  Warranty:  5 Years Standard Warranty Input Voltage:  Autosensing 100-277 V  Amp Draw:  6.23A @120\/, 3.09A@240\/, 2.71A@277V BTU 2456 Mounting Height:  >  (15.2cm) Above Canopy  Weight:  38.8 lbs  

The ThinkGrow Model I-Plus LED fixture is a high-performance grow light designed specifically for horticulture cultivation. The compact design, featuring a built-in driver, ensures a balance between energy efficiency and an optimal human work environment. The innovative V-shape design on the LED panel enhances light distribution, allowing for a reduced height from the canopy, which in turn minimizes light energy loss. Benefits of Light Intensity This LED grow light offers outstanding efficiency with a light intensity of 2.7 µmol/J, ensuring that your plants receive the maximum amount of usable light energy per unit of electricity consumed. High light intensity promotes vigorous plant growth, enhances photosynthesis, and increases yields. This efficiency translates into lower energy costs, making it an economical choice for both commercial and home growers. Benefits of the Color Spectrum The fixture features four fully controllable spectrum channels—UV, White, Deep Red, and Far Red—providing the flexibility to dial in the exact light recipe your plants need. UV (Ultraviolet): UV light stimulates the production of essential oils and resins, enhancing the flavor, aroma, and overall quality of your crops. It also helps in controlling mold and mildew, ensuring healthier plants. White Light: Mimicking natural sunlight, white light supports all stages of plant growth, from seedling to flowering. It provides a balanced spectrum that enhances overall plant health and growth. Deep Red: Deep red light is crucial for the flowering and fruiting stages of plant development. It promotes the production of flowers and fruits, leading to higher yields and better-quality produce. Far Red: Far red light influences plant morphology, encouraging stem elongation and leaf expansion. This spectrum is essential for optimizing canopy penetration, ensuring that light reaches the lower parts of the plants, promoting uniform growth. With the TrolMaster HCS-2/3 controller, you can fully control these spectrum channels, tailoring the light to the specific needs of your plants at different growth stages. The external control capability allows for the management of up to 256 fixtures per channel, making it a versatile solution for large-scale operations. In summary, this high-performance LED grow light not only maximizes energy efficiency but also enhances plant growth through its innovative design and spectrum flexibility, ensuring your plants receive the precise light they need for optimal growth and yields. Spec Sheet Download

The Model-H (original version) LED Grow Light is an advanced lighting solution designed specifically for high-performance cultivation in both multi-tier vertical farming and single-level indoor horticulture. Here are the key features and benefits of the New Model-H: Key Features: Wide Coverage: Designed to cover 4' wide grow racks or tables efficiently. High Efficiency:  Equipped with 2888 top-bin LED diodes. Total wattage of 630 watts. Adjustable Lighting: Onboard dimming for easy intensity adjustments. Connectable to a controller for precise spectrum and light intensity adjustments. Spectrum Control: Four controllable spectrum channels: UV, White, Deep Red, and Far Red. Customizable light spectrum/recipes tailored to plant needs (Spectrum Control only available with TrolMaster Hydro X HCS-2/3). Benefits: Enhanced Plant Growth: The ability to customize light recipes helps in optimizing plant growth for different stages, leading to better yields. Energy Efficiency: High-efficiency diodes reduce energy consumption while maximizing light output. Versatility: Suitable for various growing environments and applications.User-Friendly: Easy installation and maintenance save time and reduce operational complexity. Download Box includes:  1x Model-H Driver8x Model-H LED Light Bars1x 12' 240V Power Cord Wattage Draw:  Max 630 W  PPF:  630 W  Efficacy:  2.7 µmol/J  Input Power:  Max 630 W  Power Factor:  >=90% Fixture Dimensions 45"L x44.6" Wx4.44" H / 38.8 lbs Lifetime:  L90 : >54,000 hrs  Warranty:  5 Years Standard Warranty Input Voltage:  Autosensing 100-277 V  Amp Draw:  120V /5.24A, 240V /2.6 7 A, 277V /2.35A Mounting Height:  >  (15.2cm) Above Canopy  Weight:  38.8 lbs

The Model-W is a high performance LED grow light for the horticul­ture cultivation. It is designed for high PPFD cultivation practices. Full spectrum design covers each critical phase of growth from vegetative to flowering. An independent Far Red 730nm channel is designed to target Phytochrome Far Red in photomorphogenic lighting applica­tions. Base on research, introducing far-red light after the lights have been turned off can lengthen the dark period to encourage the flowering process.  The Full spectrum design covers each critical phase of growth from vegetative to flowering. An independent Far Red 730nm channel is designed to target Phytochrome Far Red in photomorphogenic lighting applications. ThinkGrow Model W Spectrum   On-Board DimmingGroup ControlExternal ControllabilityIP56 WaterproofPlug and PlayOutstanding EfficiencyFull Spectrum Design ThinkGrow Model W Spec Sheet ThinkGrow Model W Product Manual ThinkGrow Model W Product Brochure Specifications:  PPF: 1600 umols Efficacy: 2.6 umols/j Input Power: Max 630W (Full Spectrum)/ 20W (Far Red)  Power Factor: >=9% Fixture Dimensions: 45"L x44.6"W x4.44"H Mounting Height: > 6"  Above Canopy Lifetime: > 55,000 hrs Warranty: 5 Year Warranty Input Voltage: Autosensing 100-277  Amp Draw:L 120V /5.26A, 240V /2.68A, 277V /2.38A Fixture Weight: 38.8 lbs 

ThinkGrow Model-I LED Grow Light: Optimized for Greenhouse and Indoor Cultivation The ThinkGrow Model-I is a high-performance LED grow light designed specifically for greenhouse and single-level indoor horticultural cultivation. This fixture integrates cutting-edge features to enhance energy efficiency, light distribution, and overall plant growth. Key Features and Benefits Compact and Efficient Design: Built-in Driver: Ensures energy efficiency while maintaining a balanced work environment for growers. Innovative V-Shape Design: Improves light distribution, reducing the height needed from the canopy and minimizing light energy loss. Full Spectrum and UV Light: Natural Sunlight Mimicry: The full-spectrum design with UV provides a light quality similar to natural sunlight, covering all critical growth phases from vegetative to flowering. Enhanced Far Red Spectrum: Far Red Channel. Offers an additional Far Red spectrum channel, allowing a 10-15 minute exposure to accelerate the flowering cycle (External Controller required). Efficiency: Outstanding efficiency at 2.54 umol/J, ensuring optimal light utilization.Advanced Control Capabilities: External Control: Allows up to 256 fixtures per channel, providing extensive control options for large-scale operations. Compatibility: Designed to work seamlessly with TrolMaster Hydro-X control systems. Independent Channel Control: Using the TrolMaster lighting adaptor LMA-T, the Full Spectrum and Far Red channels can be independently controlled. This feature enables the Far Red channel to be activated 10-15 minutes after lights-off, expediting the flowering process. Application and Use Greenhouse Cultivation: Ideal for use in greenhouses, where efficient light distribution and control are crucial. Single-Level Indoor Cultivation: Perfect for indoor grow setups, providing a balanced light environment that supports all stages of plant growth. Conclusion The ThinkGrow Model-I LED Grow Light is a state-of-the-art solution for professional horticultural cultivation. Its compact, efficient design, combined with advanced light spectrum control and compatibility with TrolMaster systems, makes it an ideal choice for both greenhouse and indoor applications. Achieve optimal plant growth and accelerated flowering with the Model-I’s superior technology and performance. Spec Sheet Download

Model-V LED Grow Light The Model-V is a high-performance LED grow light engineered for horticultural cultivation. It is specifically designed to support vegetative cultivation practices and is ideal for both commercial cultivators and home hobbyists, particularly those cultivating without CO2 supplementation. Key Features Full Spectrum Design: Provides comprehensive coverage for all critical growth phases, from vegetative to flowering stages. Independent Far Red Channel: Features a 730nm Far Red channel to target Phytochrome Far Red.Far Red light introduction post-lights-off can extend the dark period, promoting the flowering process based on scientific research. Benefits Optimized Plant Development: The full spectrum design ensures that plants receive the appropriate light for each growth phase, enhancing overall development and yield. Enhanced Flowering Process:  The independent Far Red channel supports advanced photomorphogenic lighting applications, crucial for encouraging the flowering process. Versatility:  Suitable for various cultivation environments, whether for commercial or home use. Application Vegetative Cultivation: Perfect for growers focusing on the vegetative stage, ensuring robust and healthy plant development. Commercial and Hobbyist Use:  Designed to meet the needs of both large-scale commercial operations and small-scale home cultivation setups. The Model-V LED Grow Light combines advanced features and versatility to meet the diverse needs of cultivators, ensuring optimal growth and flowering processes. Spec Sheet Download Product Manual Download Specifications PPF:  900 µmolls Efficacy:  2.6 µmol/J Input Power:  350W (Full Spectrum) / 10W (Far Red) Power Factor:  >=90% Fixture Dimensions/ 45"Lx44.6" Wx4.44" H  Mounting Height:  >= 6"  Above Canopy Lifetime:  > 54,000 hrs Warranty:  5 Years Standard Warranty Input Voltage:  Autosensing 100-277 V  Amp Draw:  12 0V /2.63A, 24 0V /1.34A, 277 V /1.2A Weight 23.62 lbs

The LLT-1 light lifter is part of the ThinkGrow Smart Light Lifter system. Its cutting-edge synchronized multi-lifter operation provides users with a customizable, expandable and easy-to-install system. The light lifter design enables easy, two-man installation. Users can effortlessly adjust the height of the entire grow room’s light fixtures at the perfect height level with the touch of a button. It reduces assembly time and installation manpower without compromising quality or safety. ThinkGrow LLT-1 Spec Sheet Download

The TLD-4, is a modular plug-and-play LED driver that is designed to operate a single 90-watt LED bar. Since the TLD-4 is a modular driver, it can be combined with additional TLD-4 drivers to create a complete lighting system that can fit into any size space, and provide up to 1400 umol of light. It features four spectrum control channels and can be connected to a TrolMaster HCS or TCS controller to allow for remote control and independent settings for each of the four channels. That provides the ability to have customized lighting spectrum and timing control. The TLD-4 works with the 4ft long TLB-1 or 5ft long TLB-2 LED light bars from ThinkGrow.

The ThinkGrow Model One LED System 4ft Inner Canopy LED Bar with built-in 120 Watt Driver, will revolutionize high-density indoor growing. When applying light to plants only from above the plants, leaves and sections of the plant below the top “canopy” of the plant suffer from low light levels. That is the exact problem the ICL-300 is designed to fix. The ICL-300 emits light in a 300 degree pattern so that when positioned below the canopy, the sections of the plant under the canopy can also get the light they need to produce higher quality and yields. By applying some light to the middle of the plant structure, the user can eliminate lower quality flower formation and replace it with healthy flowers. The modular design of the ICL-300 allows them to be used in all installations regardless of the shape or size of the growing area. When light is only applied from overhead lighting fixtures, it is often the case that the light does not reach the bottom of the canopy, leaving a lot of gains on the table. This is where the ICL-300 steps in and solves the problem. Equipped with a built-in driver and LED diodes covering 3 sides, the ICL-300 emits light in a 300-degree direction. When placed within the canopy, the lower sections of the plants can absorb light directly from the LED and can receive the much needed light they need to produce higher quality and quantity of yields. Additionally, by applying light to the middle of the plant structure, the user can eliminate lower-quality flower formation and replace it with healthy flowers. The modular design of the ICL-300 allows them to be used in all installations regardless of the shape or size of the growing area. The ThinkGrow LED Stand was specifically designed to be used with the ICL-300. With the use of the TSD-1, growers can easily place their ICL-300 lights within the canopy, as well as easily adjust the height of the lights. Additionally, this stand facilitates the task of daisy-chaining multiple ICL-300 grow lights. Thinkgrow ICL-300 Tech-Sheet Download Thinkgrow ICL-300 Install Guide Download Thinkgrow LMA-G tech sheet (required) Thinkgrow LMA-T tech sheet (required) Don’t forget to buy: power cord (for the voltage you are using) daisy chain connections (sold in different lengths).  

The LRC-1 Smart Lifter Remote is designed to be used with the LLT-1 Smart Light Lifters. Its plug & play feature enables users to easily install and operate the light lifter(s) from a distance, and program the maximum and minimum range limits of LLT-1 light lifters. Simple Up and Down manual operation is accomplished using two push buttons on the LRC-1. The LRC-1 Lifter Remote can also be connected with the TrolMaster Hydro-X Pro controller for advanced features such as lifter-group control and more. When the LRC-1 is paired with the Hydro-X Pro, users can conveniently and smoothly control each individual lifter group or all groups together on one main controller. Each LRC-1 controls a group of lifters. Users can program the height range setting in each group and precisely raise and lower the multiple fixtures in each lifter group with the press of a button. ThinkGrow LRC-1 Spec Sheet Download

The DEA-10/12/14 is a 3' long AWG#10/12/14 Daisy-chain Extension Power Cord for all ThinkGrow LEDs, designed to extend the length of the Daisy-chain power cord, to satisfy a variety of applications. Depending on the power source of your facility, using the daisy-chain power cables can provide power to multiple lighting fixtures. The DEA-10L is a 10’ Daisy-Chain Extension Power Cord to extend the power cord cable to interconnect between LED drivers to reduce power outlets and infrastructure costs.

5' LED Bar with 4x Spectrum Channels (White+ Deep Red+ Far Red+ UV) for Model One LED System, TLB-2, is an advanced 5' LED light bar that features four spectrum channels, including full spectrum , deep red, far red, and UV. When connected to a TrolMaster controller, the TLB-2 can replicate natural sunlight properties by allowing the user to adjust the actual light spectrum. This empowers growers to customize the desired light recipe for their plants, taking advantage of the four separately controllable spectrum channels. Each TLB-1 provides 90 watts of light

4' LED Bar with 4x Spectrum Channels (White+ Deep Red+ Far Red+ UV) for Model One LED System, TLB-1, is an advanced 4' LED light bar that includes four spectrum channels, including full spectrum , deep red, far red, and UV. When connected to a TrolMaster controller, the TLB-1 can replicate natural sunlight properties by allowing the user to adjust the actual light spectrum. Each TLB-1 provides 90 watts of light , effectively meeting the needs of ALL phases from vegetative to flowering.

The DCA-10/12/14 is a 5' long AWG#10/12/14 daisy-chain power cord for all ThinkGrow LEDs, designed to interconnect LED drivers, the system can eliminate a massive amount of power outlets, and reduce the number of power cables required. Depending on the power source of your facility, using the daisy-chain power cables can provide power to multiple lighting fixtures.

4' LED Bar with 2x Spectrum Channels (Full Spectrum + Far Red) for Model One LED System, the FR-1, is a standard 4’ LED light bar that incorporates two spectrum channels, full spectrum and far red. When connected to a TrolMaster controller, it effectively covers essential growth stages from vegetative to flowering. By providing targeted far-red light to the crop at specific times, you can manipulate plant responses, accelerate flowering, and increase overall yield.

The TLD-2, is a modular plug-and-play LED driver that is designed to operate a single 90-watt LED bar. Since the TLD-2 is a modular driver, it can be combined with additional TLD-2 drivers to create a complete lighting system that can fit into any size space, and provide up to 1400 umol of light. It features two spectrum control channels and can be connected to a TrolMaster Hydro-X or Tent-X system controller to allow remote control and independent settings for each of the two channels. That provides the ability to have customized lighting spectrum and timing control. The TLD-2 works with the FR-1, DR-1 or UV-1 LED light bars from ThinkGrow.

4' LED Bar with 2x Spectrum Channels (Full Spectrum + Deep Red) for Model One System , the DR-1, is a standard 4’ LED light bar that features full spectrum and deep red spectrum channels. It can be connected to a TrolMaster controller, allowing growers to select from a range of spectrum recipes for different crops and growth stages. This flexibility can be achieved through the on-board dimming knob or compatible controllers.

The Lifter Rigging Cable Kit (RC-1) is a high-quality rigging cable specifically designed for use with the ThinkGrow Smart Light Lifter System. This cable kit is built to withstand the weight of your grow lights and is capable of lifting up to 120KG when used with other RC-1 cables. With the Lifter Rigging Cable Kit, you can easily adjust the height of your grow lights to optimize the growth of your plants and make maintenance a breeze.

This stand is designed to be used with the ICL-300. It can be used to adjust the height and for placing the ICL-300 within the canopy.

The UH-2 Unistrut Hanger is designed for low ceiling installation with standard 1-5/8” Metal Framing Channels (Unistrut). It comes with a quick release design and compatible with Model-I/I Plus fixtures.

The UH-1 Unistrut Hanger is designed for low ceiling installation with standard 1-5/8” Metal Framing Channels (Unistrut). It comes with a quick release design and compatible with Model-H/W/V fixtures.

The ThinkGrow ECS-9 RJ12 to 4pin connecter cable is simply a 12 ft cable to use with Lighting Control Adapter T (LMA-T) and ThinkGrow LEDs with Threaded Waterproof connecters for interconnecting.

TDC-120 power cord with NEMA 5-15 plug is a 7ft split power cord for the new Model-One System and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers or ICL-300 must be connected to power using one of the TDC-1 cables, or one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-120 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

The TDC-240 splitter power cord with NEMA 6-15 plug is a 7ft split power cord for the new Model-One System or ICL-309 inter canopy LED and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. The TDC-240 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

Designed to daisy-chain (interconnect) multiple LEDs to the TrolMaster controller, applicable to all ThinkGrow LEDs including Model-I / Model-I Plus, Model-H, Model-W and Model-V LEDs. Note: This is a replacement or spare part. Every LED fixtures come with a ECS-7 already.

The TDC-3 Daisy Chain Power Cord is specially designed for the new Model-One or IVL-300 inter-canopy LED System to interconnect between the LED drivers. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.  

The TDC-1 splitter + power cord is specially designed for the new Model-One or ICL-300 System and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

This Daisy Chain Cord is specially designed for the new Model-One System and ICL-300 inter canopy LED to interconnect between the LED drivers or bars.  Also required is one TDC-1 splitter power/daisy chain cord to start the chain and connect to power.  The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

the TDC-2 is a 12” daisy chain connector for Model One or ICL-300.  It requires one TDC-1 splitter power cord (to connect to power and the first LED bar or driver). And is specially designed for the new Model-One System and ICL-300 inter-canopy LEDs, and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

ThinkGrow 240V to 120V Plug Adapter for US