How cannabis cultivators measure and manage grow light radiation and spectrum

With the introduction of digital lighting - LED's. We now have the ability to provide our plants with a wide variety of spectrum which can not be produced by HPS or MH lights.
How cannabis cultivators measure and manage grow light radiation and spectrum

We have more choices today than we have ever had in terms of choosing lights for our grow rooms.

Generally speaking there are three phases to consider. Clone, vegetative (which includes mother plants) and flower/bloom cycles.

Depending on your style you can combine veg and flower phases using a single light spectrum. Growers have done this for years with high intensity discharge (HID) lamps such as HPS and MH lights.

Young clones are typically lit with much less light - florescent tubes has been a standard for years.

With the introduction of digital lighting - LED's. We now have the ability to provide our plants with a wide variety of spectrum which can not be produced by HPS or MH lights.

In the previous blog post we talked about spectrum and photosynthesis. We learned that plants in the veg phase prefer the "action spectrum" which includes more blue light and less red light wavelengths. We also know that plants moved down to the 12 hour cycle to induce flowering vastly prefer light in red wavelengths with much less blue and less overall light spectrum. This is mainly why grow lights appear purple in photographs or in some cases in person.

What this means is that todays grower's make a choice to either have two different lamps, one geared towards the Action Spectrum - a full spectrum grow light for vegging. And one geared towards flowering with a high peak in red wavelengths. Or, they can choose to use the same lamp and simply reduce the number of hours the lights are on when it is time to turn the plants to reproduction/flower phase. Growers who choose this second option make sure that they choose a light with full spectrum - and more important - they pick a lamp with a peak in red. Because without that peak of red light the final plant yield/weights will be lower. A lot lower. This is because during the flowering phase chlorophyll B becomes very important and as we saw in the last blog post - chlorophyll B demands red light and lots of it.

The second component of light which growers focus on is intensity. HID lights such as HPS have been the gold standard for many years. Growers focus on the total amount of Photosynthetic Active Radiation these lamps are able to produce. PAR is simply the total amount of light across the whole spectrum.  

Premium Quality For Growing

More Products

-4% sale
FGI Far Red LED Grow Light. 700-760nm Spectrum Enhancer.
Forever Green Indoors
FGI Far Red LED Grow Light. 44" premium quality. 700-760nm Spectrum. $ 129.00 $ 134.00
The FGI Far Red LED Grow Light is a top-of-the-line product designed for optimal plant growth. Unlike cheaper options like 660nm red LEDs found online, this light is commercial-grade and specifically tailored for use in commercial settings. The difference in quality is undeniable. Growing with Far Red EnergyFar-red light is essential for ideal plant growth as it enhances photosynthesis and increases plant size. It plays a significant role in improving light absorption, allowing plants to use light not just for energy, but also for gathering information about their surroundings.Far-red light is not usually absorbed by plant leaves, and therefore does not contribute to photosynthesis as it is mostly reflected. However, plants can sense a higher ratio of far-red light to normal light, indicating the presence of obstructions or neighboring plants.Far-red light can also regulate leaf angle and increase plant height and leaf area, via expression of associated genes, to capture more light energy. To maximize plant growth, it's crucial to provide the proper lighting. Our commercial-grade FGI Far Red LED Grow Light Set 44" is expertly crafted to elevate photosynthetic light levels for both vegetative and flowering stages. By adding two sets of these bars to a 4x4 grow space, PAR will increase by 10%, resulting in healthier plants and larger yields upon harvest. Take your growing operation to the next level with our Far Red LED Grow Light Set - a must-have for serious growers. The science of using far red light on plants Recent studies at the University of Texas El Paso / University of Texas Arlington, concluded that plants exposed to full spectrum plus dosing with far red spectrum, increased overall plant mass/yield and also improved terpene profiles. Read the study here. The light coverage of this product is unmatched. It will fully cover a 4' wide grow tray in bloom and generally covers a 2' wide swath. We recommend a pair for each 4x4 grow space and this unit comes with hardware which allows you to position it inside the frame of most 5 and 8 bar full spectrum LEDs. This light system is one of the best on the market and will give your plants the light they need to thrive. Order now and be sure to get your grow space set up correctly so you can achieve maximum light coverage. Targeting the Emerson Effect. The Emerson Effect is the name given to the increase in the rate of photosynthesis that occurs when chloroplasts are exposed to far red energy just before the nighttime lights off cycle. This effect was first discovered by scientist Alexander Emerson in 1883, and it has since been extensively studied by plant biologists. While the Emerson Effect is typically associated with increases in photosynthesis, it can also lead to other changes in plant physiology, such as increased cell division and growth. One way to take advantage of the Emerson Effect is to use our supplimental far red LED grow light for 10-15 minutes after full spectrum lights are turned off. If you are looking to create the ideal environment for your plants, an LED grow light can help you to achieve the Emerson Effect.   Far Red Spectrum General use: Studies indicate that dosing with far red light is most effective with 4 hours on, 4 off, and 4 on. We recommend a digital wall timer, or if using TrolMaster the DSP-1 (for 110V connections) or a DSP-2 (for 240V).  Emerson Effect:  10-15 minutes after full spectrum lights are turned off. Plant Morphology Theory Plants use phytochrome to detect and respond to red and far-red wavelengths. Phytochromes are signaling proteins that promote photomorphogenesis in response to red light and far-red light. Phytochrome is the only known photoreceptor that absorbs light in the red/far red spectrum of light (600-750 nm). (source: Wikipedia) Far Red light is believed to create a competitive response in plants, pushing desirable terpene production and assisting in the formation of trichomes.   Read more about Far Red and extended spectrum in this recent release from Design Lights Consortium: Read It Here   ~Technical Specs~   Product 30W(±5%) PPF 72.1 umols/s  100-277VAC,50/60 Hz 102.3BTU IP65 44.88”x 2.24”x 1.53” 4.4 lbs Photometric Test Report Download  Product Warranty (see our warranty here) 3 year warranty
-24% sale
Square 2 LED Grow Light. 220W. High Output. 2'x2'. With Far Red Too.
Forever Green Indoors
FGI Square 2 LED Grow Light. 220W full spectrum plus far red diodes. $ 149.00 $ 195.00
Affordable, compact, extended far red spectrum LED grow light for plants of all types.    Growing tomatoe starts with the FGI Square 2   The FGI Square 2 is an excellent entry level LED grow light for those looking to give their plants the sun's energy. Unlike other lights on today’s market that only provide certain colors needed by plant life (or lack thereof), this one provides all the necessary components: red, orange, yellow green and blue spectrum which together make up the building blocks for successful photosynthesis (and closely matches our sun).  If you are looking for an easy to use LED to learn how to grow any plant types indoors, look no further than the FGI Square 2. Well loved by gardeners everywhere. Designed in the USA by Forever Green Indoors in Seattle WA. Plant lighting LED light experts since 2013. Use the Square 2 to grow all types of plants. Placing the light closer to the plants provides enough energy to match the summer sun. Pulling the light further away, or using the built in dimming, provides the right energy for starts and seedlings.  Learn more about the FGI Square 2 on our YouTube Channel here:  The Square 2 is one of the more efficient grow lights on today's market, using only 220 watts! This means it can produce far less heat than higher wattage lamps. We designed it to deliver the perfect balance of light. It's full spectrum white LEDs help plants grow healthy while adding 5% total deep as well as far-red diodes for an extended range that will optimize your plant growth! Key Features:  Compact size: 20" x 20" x 3" Lightweight: 10 lbs  Built in dimming knob: Adjusts levels for young to mature plants.  Spectrum: Full spectrum plus 5% 660nm deep red plust 730nm far red LED diodes.  Includes: 110V power cord. Two clip and steel cable wire hangars. Product manual.    Technical  PAR Chart at 24" From Diodes The right kind of light can make all the difference for your plants. Flowers, fruits and other high energy use types require levels as high as 1000 PPFD - a measurement that approximates natural sunlight. Spectrum From Our Sun   We design grow lights to closely mimic natural sunlight (shown above). Although it's not possible to exactly duplicate a giant burning ball of hydrogen, we get as close as possible with the Square 2.   Spectrum from the Square 2     Don't wait! We have limited stock on this LED. Buy yours today.     ~Technical Specs~ProductDiodes (White) Brand name: Shenzhen LidedaNumber of pieces 360Total Diode Wattage Capacity (not actual draw) 300WMaximum Advertised Wattage 300Equivalent Wattage 1000CCT 4000KCRI 80CRIOther color Diodes (Red)Brand Name: Shenzhen LidedaNumber of pieces 96CCT NAWavelength 655-665nmOther color Diodes (FR) Brand Name: Shenzhen LidedaNumber of pieces 24CCT NAWavelength 730-745nmRatio mix white/red (%) 3:1Projected Diode Lifetime (L-90) - in hours 50,000 hoursPhotosynthetic Light Measurements PPF Output* 436.1 umol/sPPF Efficacy* PPF 2.1umol/J PPFD Output 900 umols/ms at 24" below diodesPhotopic Light MeasurementsLuminous Flux* 30342lmLuminous Flux Efficacy 151.7lm/wOther Input Power Watts 218Input Voltage 110VCord length 8' (2.44m, 18AWG )Plug type (note if bare whip) Molded 110VProduct Dimensions Dimensions W x L x H (inches) 20x20x3.5Weight (pounds) 10Operating Temp range (F) -20℃ — +40℃IP rating (UL-ETL or estimated final UL-ETL)IP(UL- UL-ETL) IP20Physical Dimensions Package Dimension W x L x H (inches) 24x23x5Inner carton (Yes/No) NOInner Carton Weight NOMaster Outer carton (Yes/No) YESNumber of pieces in Master Carton (1, 2, 3) 1Master carton weight (lbs) 2Dimming / Tuning Dimming (Yes/No) YesProduct Warranty (against manufacturing defects) 3 years Warranty does not include coverage for damage caused by water or exposure to VOC's or electrical damage caused by voltage spikes. We recommend using a basic power surge suppressor such as those found on power strips to protect your light from utility power outages. 
-5% sale
FGI Far Red LED Grow Lights 44” long. Waterproof. 700-760nm. Plants, aquariums, mushrooms.
Forever Green Indoors
FGI Far Red LED Grow Light Set 44” Commercial-grade 700-760nm. Plants, aquariums, mushrooms. $ 239.00 $ 249.00
The FGI Far Red LED Grow Light is a top-of-the-line product designed for optimal plant growth. Unlike cheaper options like 660nm red LEDs found online, this light is commercial-grade and specifically tailored for use in commercial settings. The difference in quality is undeniable. Growing with Far Red EnergyFar-red light is essential for ideal plant growth as it enhances photosynthesis and increases plant size. It plays a significant role in improving light absorption, allowing plants to use light not just for energy, but also for gathering information about their surroundings.Far-red light is not usually absorbed by plant leaves, and therefore does not contribute to photosynthesis as it is mostly reflected. However, plants can sense a higher ratio of far-red light to normal light, indicating the presence of obstructions or neighboring plants.Far-red light can also regulate leaf angle and increase plant height and leaf area, via expression of associated genes, to capture more light energy. To maximize plant growth, it's crucial to provide the proper lighting. Our commercial-grade FGI Far Red LED Grow Light Set 44" is expertly crafted to elevate photosynthetic light levels for both vegetative and flowering stages. By adding two sets of these bars to a 4x4 grow space, PAR will increase by 10%, resulting in healthier plants and larger yields upon harvest. Take your growing operation to the next level with our Far Red LED Grow Light Set - a must-have for serious growers. The science of using far red light on plants Recent studies at the University of Texas El Paso / University of Texas Arlington, concluded that plants exposed to full spectrum plus dosing with far red spectrum, increased overall plant mass/yield and also improved terpene profiles. Read the study here. The light coverage of this product is unmatched. It will fully cover a 4' wide grow tray in bloom and generally covers a 2' wide swath. We recommend a pair for each 4x4 grow space and this unit comes with hardware which allows you to position it inside the frame of most 5 and 8 bar full spectrum LEDs. This light system is one of the best on the market and will give your plants the light they need to thrive. Order now and be sure to get your grow space set up correctly so you can achieve maximum light coverage. Targeting the Emerson Effect. The Emerson Effect is the name given to the increase in the rate of photosynthesis that occurs when chloroplasts are exposed to far red energy just before the nighttime lights off cycle. This effect was first discovered by scientist Alexander Emerson in 1883, and it has since been extensively studied by plant biologists. While the Emerson Effect is typically associated with increases in photosynthesis, it can also lead to other changes in plant physiology, such as increased cell division and growth. One way to take advantage of the Emerson Effect is to use our supplemental far red LED grow light for 10-15 minutes after full spectrum lights are turned off. If you are looking to create the ideal environment for your plants, an LED grow light can help you to achieve the Emerson Effect.   Far Red Spectrum Use We recommend 2 units per 4x4 grow space for daytime enhanced PPFD delivery. Height over canopy should be the same as your full spectrum LED but it will not hurt the plants to hang beneath a 4x4 LED.  Time General use: Studies indicate that dosing with far red light is most effective with 4 hours on, 4 off, and 4 on. We recommend a digital wall timer, or if using TrolMaster the DSP-1 (for 110V connections) or a DSP-2 (for 240V).  Emerson Effect:  10-15 minutes after full spectrum lights are turned off. Plant Morphology Theory Plants use phytochrome to detect and respond to red and far-red wavelengths. Phytochromes are signaling proteins that promote photomorphogenesis in response to red light and far-red light. Phytochrome is the only known photoreceptor that absorbs light in the red/far red spectrum of light (600-750 nm). (source: Wikipedia) Far Red light is believed to create a competitive response in plants, pushing desirable terpene production and assisting in the formation of trichomes.   Read more about Far Red and extended spectrum in this recent release from Design Lights Consortium: Read It Here ~Technical Specs~   Product 30W(±5%) PPF 72.1 umols/s  100-277VAC,50/60 Hz 102.3BTU IP65 44.88”x 2.24”x 1.53” 4.4 lbs Photometric Test Report Download  Product Warranty (see our warranty here) 3 year warranty
-4% sale
FGI UV LED Grow Light. 340-400 nm Extended Spectrum for plant growing.
Forever Green Indoors
FGI UVA LED Grow Light. 340-400nm. Premium quality. $ 129.00 $ 134.00
DESCRIPTION Rugged, waterproof, glass lens, 100-277 VAC. This unit is built to last.  Designed to match natural sunlight levels, the FGI UVA LED Grow Light offers extended spectrum Supplemental Blue 340-400 nm with an added PAR Booster to ensure optimal absorption of the light energy. Perfect for indoor growers and plant enthusiasts! The reason for this is that plant morphology is affected by the spectral composition of light, which means that different wavelengths of light can promote different plant growth. In particular, blue light is known to encourage compact growth and strong stems, making it an essential part of plant development. By providing plants with the same level of blue light as they would receive from the sun, the FGI 385nm UV Lightbar ensures that they can grow and develop in the best possible way. As a result, it is an invaluable tool for any gardener or plant lover who wants their plants to thrive. Science behind using UV-A supplemental energy on plants Recent studies at Utah State University have shown that plants absorb and benefit from light between 380-740NM. This research has led to the study of E-PAR or extended PAR and is redefining measurement of photosynthetic light.  Below are the spectrum charts which compare natural sunlight to full spectrum LEDs and then to full spectrum plus supplemental UV.  The result is a closer match to sunlight providing more of the beneficial blue light that plants benefit from.  Sunlight Levels of 380NM UV Natural sunlight provides plants 1.22 umols of 380nm blue energy.  Natural Sunlight Spectrum Blue Energy 1.2234 umols Typical Full Spectrum LED Lack 380NM UV Full spectrum LEDs have limited blue spectrum which peak at 460nm.   Full Spectrum LED 460nm Blue Energy Levels .0514 umols Full Spectrum LED with Supplemental 380NM UV  Adding supplemental 385NM UV creates a secondary peak of blue energy at 1.5047 umols at 12" from the canopy, roughly equaling natural sunlight.  Supplemental UV Spectrum plus Full Spectrum Blue Energy 1.5047 umols (3x greater)  Build Quality These are high quality units with a crystal glass lens cover to protect the diodes and allow for cleaning. The all aluminum frame dissipates what little heat the bar creates. At 30 watts the Lightbar sips energy too.  Spectrum Theory  Blue energy is scientifically known to help form more compact plants. More lush leaf growth, stronger and larger stems and tighter internodal spacing. We gave a prominent researcher at a major State University one our 385NM UVA Lightbars:  "Your UVA lights arrived and we have confirmed their 385 nm peak. This looks like a high quality fixture." He went on to say: "Elevated exposure to UV photons is known to enhance the synthesis of UV blocking compounds in the leaves of many species and it is reasonable to think that UV photons can increase the synthesis of secondary metabolites in plants." And further, "I expect we will find value in dosing of CSat plants with UV photons, but not surprisingly, the effects will likely interact with UV wavelength, intensity, timing of delivery, and growth stage." The UVA Lightbar fits neatly inside the frame of our Uniformity Pro LEDs as well as many other multi-bar style full spectrum LEDs. Use We recommend two of our UV-A LEDs over each 4'x4' area. The slim design allows them to be hung inside the frame of most 6 and 8 bar LEDs. Mounting height should be at the same level to avoid creating shadowing.  Control A basic digital 110V wall timer can be used, or if using the TrolMaster Hydro X we recommend the DSP-1 module for 110V or DSP-2 for 120V power connection and multiple on/off timer programming.   ~Technical Specs~ Product 30W(±5%) 20 UVA Diodes Per Bar 100-277VAC,50/60 Hz 102.3BTU IP65 44.88”x 2.24”x 1.53” 4.4 lbs Photometric File Download Product Warranty (see our warranty here) 3 year warranty
-19% sale
FGI Flexi-clone LED grow light for seedlings and plant starts
Forever Green Indoors
FGI 4’ 20W LED grow light set for clones and seedlings. Linkable. $ 89.95 $ 110.00
The FGI Flexi-Clone LED grow light is designed to give plant starts the best chance of succeeding. Featuring quality made LED lighting for a reliable outcome, this light is perfect for seedlings, clones, and plant starts. Our 4' long grow bars are able to interconnect, or can be used independently.  Link additional bars side-by-side to increase photosynthetic light intensity. Two bars are perfect for new starts. Four bars work well for younger plants or more light sensitive varieties.  Combine up to 30 Flexi-Clone bars on a single 120/240V plug to run your entire plant propagation area without needing dozens of sockets.  High quality all aluminum construction. Solid state, fanless and driverless design.  LED diodes protected from moisture with a conformal coating. Accidental spray won't affect them at all.  3 year warranty against defects.  Water resistant light to light connectors. Clip on hanging bracket included.  Compare the Flexi-Clone to other plastic seedling lights and you'll see why people choose the flexi-clone system instead. Here is our grow light spectrum compared to the sun and other lighting styles. You can see why plants thrive under our grow spectrum. We more closely match natural sunlight.  The FlexiClone system is fantastic. Your plants will love this light.  Sold as as set of two bars, use two of the Flexi-clone bars to cover 4' x 2' of area.  We stand behind our lights with a 365 day money back guarantee.   Unboxing and Installation Video  ~Technical Specs~ Product FGI Flexi Clone LED Grow Light (set of two) Light Source LED Spectrum 4506 CCT Warm White / Neutral White mixPhotosynthetic Light MeasurementsPPF Output* 69 umols/ms PPF Efficacy* 2.30 Umol/sec/wPPFD @ 12" 115 Umol/m²/sFixture coverage ( max intensity / max uniformity )* 4' x 1' per LED / 4' x 2' per set of two LEDsPhotopic Light MeasurementsLuminous Flux* 8,229 LumensLuminous Flux Efficacy* 136.2 Lm/wIlluminance @ 12" 32,069 LuxOtherInput Power 25 watts per barInput Voltage 100-277VAC autosensingDimensions 47.2”x 1.89”x 1.3”Weight 1.1 lbsOperating Temp range 32 F - 104 FThermal Management PassiveRecommended Mounting height 12" for one set. Add additional bars to increase light levels and mounting heights. Dimming / Tuning No Product Warranty (see our warranty here) 3 years
-13% sale
FGI Square 320W Smart LED Grow light full spectrum plus dark red booster built-in
Forever Green Indoors
FGI Square 320W Smart LED Grow light built-in WiFi connectivity. $ 289.00 $ 329.00
For both entry level and experienced growers. The innovative square design of the FGI Square 3 provides excellent light coverage and intensity over 3'x3' in flower, so you can be sure your plants are getting everything they need to thrive. The easy to use wifi module allows control using your phone with our free Cloud Intelligence App. The extended far-red spectrum delivers all the wavelengths your plants need for healthy growth, and the built-in dimming function allows you to customize the light output to suit your plants' needs. Our 365-day money back guarantee ensures that you are fully protected with Forever Green Indoors. Here is a comparison to natural sunlight and fluorescent lighting.  Forever Green's time tested grow light spectrum comparison  Our WeatherEFX Cloud Intelligence WiFi controller allows you to mimic natural weather, like sunrise and sunset to optimize plant growth.  Learn more about WeatherEFX, and the Cloud Intelligence App on YouTube here:    Square 3 Product Manual  Wifi Controller Manual and Troubleshooting Guide  FEATURES Lightweight - just 13 lbs Slim - 3" deep Cool - won't add too much heat 4 push button dimming settings COVERAGE The Square 3 is designed for flowering in 3'x3' spaces at up to 1000 umols/ms. (CO2 recommended for this light level). Or grow at 800 umols/ms without CO2. It can be used for Veg when dimmed. And when fully dimmed can be used over clones and starts too.Below are PAR readings with the lights at three different distances. At 24" expect PPFD to be above 1000 umols/ms, but not as uniform. At 30" PAR will be above 750 umols/ms. This is an ideal light level if not using supplemental CO2. These levels are equal to a typical HPS grow space.At 36" light levels become more uniform from corner to corner but at 680 umols are below what we'd recommend for flower.At 48", light levels are the most uniform and are perfect for mature veg plants. Use the built in dimmer to reduce intensity for young veg plants. Product Manuals:  Square 3 Product Manual  Wifi Controller Manual and Troubleshooting Guide  SPECIFICATIONS FGI Square 3 WiFi LED Grow LightDiodes (White)Diodes Brand name: Shenzhen Lideda Number of pieces 960 CCT 4000K CRI 80CRI Other color Diodes (Red) Brand Name: Shenzhen Lideda Number of pieces 256 CCT NA Wavelength 655-665nm Other color Diodes (FR) Brand Name: Shenzhen Lideda Number of pieces 64 CCT NA Wavelength 730-745nm Ratio mix white/red (%) 3:1Product Warranty/Longevity Warranty (years) 5 years Lifetime (L-90) - in hours 50,000 hours Photosynthetic Light Measurements PPF Output* 1120 umol/s PPF Efficacy* PPF 2.38umols/j Photopic Light Measurements Luminous Flux* 67,000 lm Luminous Flux Efficacy 168 lm/w Other Input Power Watts 320W Input Voltage 110V Cord length 8' (2.44m, 18AWG ) Plug type (note if bare whip) Molded 110V Product Dimensions Dimensions W x L x H (inches) 22 x 22 x 3.5 Weight (pounds) 13 Operating Temp range (F) -20℃ — +40℃ IP rating IP20 Rating CSAPhysical Dimensions Package Dimension W x L x H (inches) 27 x 26 x 6.5 Dimming / Tuning: Push button / Wifi App Product Warranty: 3 years against defects. See our warranty policy page for details. 
-3% sale
FGI UVA LED Grow Light Set. 44”. Waterproof. 340-400nm. Plants, aquariums, mushrooms.
Forever Green Indoors
FGI UVA LED Grow Light Bundle. 44”, rugged. Premium quality. $ 239.00 $ 245.00
DESCRIPTION Rugged, waterproof, glass lens, 100-277 VAC. This unit is built to last.  The FGI 385nm UV Lightbar is designed to provide targeted supplemental blue energy to equal natural sunlight levels. At Forever Green, we strive to match natural sunlight with our lighting products. The reason for this is that plant, corals and mushroom morphology is affected by the spectral composition of light, which means that different wavelengths of light can promote different growth characteristics. In particular, blue light is known to encourage compact growth and strong stems, making it an essential part of plant development. By providing plants with the same level of blue light as they would receive from the sun, the FGI 385nm UV Lightbar ensures that they can grow and develop in the best possible way. As a result, it is an invaluable tool for any gardener or plant lover who wants their plants to thrive. Science behind using UV-A supplemental energy on plants Recent studies at Utah State University have shown that plants absorb and benefit from light between 380-740NM. This research has led to the study of E-PAR or extended PAR and is redefining measurement of photosynthetic light.  Below are the spectrum charts which compare natural sunlight to full spectrum LEDs and then to full spectrum plus supplemental UV.  The result is a closer match to sunlight providing more of the beneficial blue light that plants benefit from.  Sunlight Levels of 380NM UV Natural sunlight provides plants 1.22 umols of 380nm blue energy.  Natural Sunlight Spectrum Blue Energy 1.2234 umols Typical Full Spectrum LED Lack 380NM UV Full spectrum LEDs have limited blue spectrum which peak at 460nm.   Full Spectrum LED 460nm Blue Energy Levels .0514 umols Full Spectrum LED with Supplemental 380NM UV  Adding supplemental 385NM UV creates a secondary peak of blue energy at 1.5047 umols at 12" from the canopy, roughly equaling natural sunlight.  Supplemental UV Spectrum plus Full Spectrum Blue Energy 1.5047 umols (3x greater)  Build Quality These are high quality units with a crystal glass lens cover to protect the diodes and allow for cleaning. The all aluminum frame dissipates what little heat the bar creates. At 30 watts the Lightbar sips energy too.  Spectrum Theory  Blue energy is scientifically known to help form more compact plants. More lush leaf growth, stronger and larger stems and tighter internodal spacing. We gave a prominent researcher one of our UV-A LEDs and he said:  "Your UVA lights arrived and we have confirmed their 385 nm peak. This looks like a high quality fixture." He went on to say: "Elevated exposure to UV photons is known to enhance the synthesis of UV blocking compounds in the leaves of many species and it is reasonable to think that UV photons can increase the synthesis of secondary metabolites in plants." And further, "I expect we will find value in dosing of CSativa plants with UV photons, but not surprisingly, the effects will likely interact with UV wavelength, intensity, timing of delivery, and growth stage." The UVA Lightbar fits neatly inside the frame of our Uniformity Pro LEDs as well as many other multi-bar style full spectrum LEDs. Use We recommend two of our UV-A LEDs over each 4'x4' area. The slim design allows them to be hung inside the frame of most 6 and 8 bar LEDs. Mounting height should be at the same level to avoid creating shadowing.  Control A basic digital 110V wall timer can be used, or if using the TrolMaster Hydro X we recommend the DSP-1 module for 110V or DSP-2 for 120V power connection and multiple on/off timer programming.   ~Technical Specs~ Product 30W(±5%) 20 UVA Diodes Per Bar 100-277VAC,50/60 Hz 102.3BTU IP65 44.88”x 2.24”x 1.53” 4.4 lbs Photometric File Download Product Warranty (see our warranty here) 3 year warranty
-17% sale
FGI CTB-6 660-720W Uniformity Pro F-Type. Professional LED Grow Light.
Forever Green Indoors
FGI CTB-6 660-720W Uniformity Pro F-Type. Professional LED Grow Light. $ 995.00 $ 1,195.00
The FGI CTB-6 F-Type (full spectrum) is the best grow light we've ever sold. It outperforms all others in its class. So good it’s our Gen III Uniformity Pro model; a long line of top performing commercial grade LEDs from Forever Green Indoors.  Premium built LED grow lighting designed by CABA Tech, experienced grow light electrical engineers here in Washington. Tested extensively in the field by experienced growers. (See installs on the YouTube link below). Built to last with premium quality components. They don't build them like this anymore. Full five year warranty.  We purchased the entire production run and have over 1000 in stock. Exclusively available from Forever Green Indoors.     Product Unboxing Video    Build Quality The CTB-6 660W commercial grow light is constructed to ensure long term performance in any environment.   Heavy duty aluminum enclosure for drivers and controls. Aluminum tube frame that folds open.  Multiple 277 watt solid state drivers power three different LED diode colors. Drivers are digitally programmed to output our patented grow spectrum. Warm white, cool white and red LEDs are tuned perfectly for plant growth indoors. All electrical connections are sealed and epoxied to prevent moisture from affecting the light long term. Diodes are sealed with multiple conformal coatings to protect from VOC's in the grow space.  Photometric tests downloads are below. We're so confident that you'll love this LED that we are extending a 12 month money back guarantee for all units purchased online, here on our site. Volume purchase pricing available. Contact us for a quote. This product comes with a 12 month, no questions asked, money back guarantee.   Control Options Any 0-10V controller. Dims to off. FGI dimming controller - requires wiring harness.  TrolMaster Hydro X Recommended bundle; TrolMaster Hydro X plus LMA-14 Lighting Adapter. Controls up to 60 CTB-6 grow lights. Or add a second LMA-14 on the second channel to control 60 more. All available here on our shopping site (see below).  Highlights 720W Boost Mode Variable dimming knob.  Latest in Lumiled 3535 and Osram long life diodes 1617 PPF @2.58 umols/j (1640 in boost mode) Lifud solid state digital drivers.  Patented grow spectrum controlled by multiple drivers Folds open for easy install Includes rope hangers and heavy duty cable connectors.  110-277 VAC - includes 120V and 240V plug adapters. No special wiring required. Power cord included.  PAR MAP at 24" (Best Uniformity) The CTB-6 demonstrates the most uniform light spread of any multibar LED. At 24" the uniformity is perfect over 16sf of canopy. At 18" PAR increases to 1100 umols/ms.    Isoline view demonstrates light uniformity across bands of PPFD (created in AGI32 by Lighting  Analysts) 800-1100 umols/ms   Spectrum This light is offered in two custom spectrum formulas. Full Spectrum and Bloom Spectrum. Bloom spectrum has 24% additional red and far red output.  Spectrum Our Full Spectrum version produces a balanced 400-700nm output, and less red energy in comparison to the B-Type model. This is accomplished by supplying balanced power to the three independent LED drivers. Our F-Type model produces 1640 PPF for very high intensity PAR on canopy applications.  DLC listed for commercial lighting rebates. We provide rebate program management to maximize your money back. Contact us to learn more.    View More Content On YouTube     Spec Sheet Download  Tear Sheet Download  Photometric Test Reports  (Boost mode, 50% and 100% power) Specifications: DLC Model: CTB6-660W-R1-SH-FS ID: H-CS84WU 5 year warranty.  Diodes: Lumiled & Osram Full Spectrum, Top Bin Long Life  CCT: 3850 CRI: 86 Drivers: Lifud 277W (3 per light) Tuning: Locked in patented light recipe. Bloom and Full Spectrum Versions. Wattage: 660w-720w boost mode output  Voltage: 100-277V AC Autoswitching Plugs: 220-240V Nema Plug. 110-120V Accessory Plugs Included Coverage: 4x4 with CO2. 5x5 No CO2 Dimensions: 47" x 43" x 4"  Hanging Hardware: Rope hangers & Steel V hangers included. Bars: 6 LED bars, conformal coatings.  Cooling: Fanless passive heavy duty design Weight: 37 lbs Controller: Optional   

60 DAYS EASY RETURNS

FREE US SHIPPING

FAST CHECKOUT

SAME DAY FULFILLMENT

(Orders before 11am pst)