Controller
-9% sale
TrolMaster HCS-1 Controller w/3-in-1 Sensor Bundle
Trolmaster
TrolMaster HCS-1 Controller w/3-in-1 Sensor Bundle $ 359.94 $ 394.80
If you're looking for a complete, professional-grade environmental control system, the TrolMaster Hydro-X is the perfect solution. This modular system is easy to install and expand, and can be fully customized to your needs. With the free TrolMaster App, you can access all system settings and alerts from anywhere, anytime. The Hydro-X system is compatible with most grow lights brands, HVAC systems, mini-split air conditioners, commercial dehumidifiers and humidifiers, as well as CO2 generators or regulators. So whether you're looking to maintain optimal growing conditions in your indoor garden or keep your home comfortable all year round, the Hydro-X system has you covered. Includes the TrolMaster 3 in 1 sensor bundle and RJ16 cables. A turn-key environmental sensor system to tune up your gardens success.  Looking for a trusted high volume TrolMaster Official Distributor in North America? Look no further than Forever Green Indoors! We're the leading provider of quality TrolMaster products and accessories, and we're here to help you keep your indoor spaces looking their best.We've got everything you need to keep your plants healthy and green, from TrolMaster controllers and sensors to PAR meters and EC sensors. And we're always happy to offer advice and assistance to make sure you get the most out of your TrolMaster products.So if you're looking for top-quality TrolMaster products and accessories, plus expert advice and support, come to Forever Green Indoors - we're your one
-5% sale
Trolmaster LMA-14 Lighting Adapter F - Use with FGI brand LEDs
Trolmaster
Trolmaster LMA-14 Lighting Adapter F (for use with 0-10V drivers/ballasts) $ 66.41 $ 69.60
This LMA-14 lighting adapter is specially designed to control a wide variety of lighting systems including FGI brand LEDs (specialty custom cables are available here from FGI, please order the correct cable for your lighting system) and HIDs like Gavita/Nanolux/Luxx/Growers Choice/Illuminar/PL and LEDs like Fluence/Next light/Spectrum King TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option. 
-12% sale
Trolmaster Hydro X DSH-1 Humidity Device Station
Trolmaster
Trolmaster DSH-1 Humidity Device Station $ 74.39 $ 84.00
  LED Power Indicator RJ12 Cable Socket Addressing Plug & Play The TrolMaster DSH-1 Humidity control / device modules allow user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. The DSH modules are rated at 10-amps. *Use with dehumidifiers less than 7 amps to avoid current overload. Package Contents:  1 x Device Station 1 x 16ft RJ12 Cable 1 x 4ft RJ12 Cable 1 x RJ12 T-Splitter Specifications: Input Voltage: 100~240 VAC, 50/60Hz Output Current: 10A Output Voltage: 100~240 VAC, 50/60Hz Working Environments: Temperature 32-122°F, Humidity=90% Package Dimensions: 3.3(L) x 3(W) x 3.5(H) in G.W. per pack: 12 oz 
-5% sale
Hydro-X DSC-1 CO2 Device Station CO2 Control Relay
Trolmaster
Trolmaster DSC-1 CO2 Device Station CO2 Control Relay Single Pack with cable set $ 74.34 $ 78.00
The TrolMaster DSC-1 CO2 control / device module allows user the to easily connect and control standard supplemental CO2 devices or CO2 exhaust controls to the Hydro-x. Any CO2 device that is 10-amps @ 120 volts or less can be controlled by the DSC-1.
-5% sale
Trolmaster MBS-S8 Hydro-X CO2 Sensor - Accessory for HCS-1 Controller
Trolmaster
Trolmaster MBS-S8 Hydro-X CO2 Sensor - Accessory for HCS-1 Controller $ 253.08 $ 266.40
 Description The optional CO2 Sensor (MBS-S8) measures the CO2 PPM within the growing area. Using the MBS-S8 allows the users to connect and control their supplemental CO2 system using the Hydro-X. *Used in combination with one or more DSC-1 CO2 device modules.
-5% sale
Trolmaster DST-1 Hydro-X Temperature Device Station
Trolmaster
Trolmaster DST-1 Hydro-X Temperature Device Station - Temperature Control Relay Single Pack with ... $ 79.80 $ 84.00
The TrolMaster DST-1 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps at 120 volts or less can be controlled by the DST-1.
-13% sale
Trolmaster DSP-1  Program Device Station Timer
Trolmaster
Trolmaster DSP-1 Program Device Station Timer $ 73.80 $ 84.00
The TrolMaster DSP-1 program device module (timer module) works like a multi-function timer. The DSP-1 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x.  Any device that is 10-amps at 120 volts or less can be controlled by the DSP-1.
-10% sale
Trolmaster ARS-1 AC Remote Station
Trolmaster
Trolmaster ARS-1 AC Remote Station $ 113.70 $ 126.00
The ARS-1 mini-split air conditioner controller is a unique product that solves the age-old problem of having separate day and night temperature settings on your mini-split air conditioners. The ARS-1 is a universal controller that works with most mini-split air conditioners (and some window-type AC units too), as long as the unit came with an IR / infrared remote controller. We use the remote control that came with the unit to “teach” those IR signals to the ARS-1 module. Once the ARS-1 “learns” those remote control codes, the ARS-1 will send those same signals to the indoor mini-split head unit changing the setpoint to the desired Day or Night temperature setting automatically base on the photocell sensor status.
-5% sale
Trolmaster Hydro X HS-1 Humidistat Station For Dehumidifier
Trolmaster
Trolmaster HS-1 Humidistat Station For Dehumidifier w/24V Terminal $ 139.66 $ 147.00
  LCD Display, Easy Operation Seamless Connection with Hydro-X Micro-SD for Firmware Upgrade Address Assignment Plug & Play The HS-1 from TrolMaster is used to control commercial dehumidifiers. Most larger / commercial dehumidifiers have a “low-volt” control option so the dehumidifier can be controlled by an external humidistat. The HS-1 works and is wired exactly like an external humidistat. The HS-1 is the best way to control your dehumidifiers by eliminating the need to control the high-amperage / inrush current associated with dehumidifiers. Package Includes: 1 x Humidistat Station (HS-1) 1 x 16ft RJ12 Cable 1 x 4ft RJ12 Cable 1 x RJ12 T-Splitter Specifications: Output Voltage: 24V Maximum Current: 1A Working Environment: Temperature 32-122°F, Humidity=90% Packaging Dimensions: 160mm(L) x 86mm(W) x 86mm(H)    
Sold out -5% sale
Trolmaster SPH-1 RJ12 Splitter Hub
Trolmaster
Trolmaster SPH-1 RJ12 Splitter Hub $ 37.62 $ 39.60
  LED indicator Plug & Play he SPH-1 Splitter Hub from TrolMaster makes installation of our controllers as easy as plugging in a phone cable. The SPH-1 hub uses a single RJ12 cable input jack, and provides (8) individual RJ12 output jacks that can be connected to various TrolMaster sensors, adapters and device modules. Using the SPH-1 allows for a "clean" installation and eliminates the need for daisy-chain Y-splitters to be used to interconnect multiple modules or sensors. The SPH-1 is also a powered hub, meaning that it will boost the signals passing through the SPH-1 allowing more modules, sensors and light adapters to be connected to the TrolMaster controllers. By using the SPH-1, an almost unlimited number of LED / HID lights can be controlled using a single TrolMaster controller. The SPH-1 comes complete with the SPH-1 hub, a 16 foot RJ12 cable and the 12vdc power supply. The SPH-1 can be located in a central location with a single RJ12 cable connecting it to the main controller. From the SPH-1 hub, the individual RJ12 jacks can be connected to each of the sensors, device modules, or lighting adapters. Included In Package: 1x RJ12 Splitter Hub 1x 12V Power Adapter 1x 4 ft RJ12 Cable Specifications: Input Voltage: 12VDC Maximum Current: 1A Working Environment: Temperature 32-122°F, Humidity≤90% Packaging Dimensions: 160mm(L) x 85mm(W) x 90mm(H)
-5% sale
Trolmaster ECS-1 RJ12 Extension Cable Set
Trolmaster
Trolmaster ECS-1 RJ12 Extension Cable Set $ 22.80 $ 24.00
  TrolMaster modules and sensors all come complete with a RJ12 16ft cable, Y-splitter and RJ12 4 ft cable to connect to the Hydro-x. When connecting modules that are farther apart, you can use the Extension cable set ECS-1. The ECS-1 comes complete with another 16ft cable, Y-splitter and 4 ft cable. Package Includes:  1 x Male-to-Male 16ft RJ12 Cable 1 x Male-to-Male 4ft RJ12 Cable 1 x RJ12 T-Splitter  
-5% sale
Trolmaster ECS-5 RJ12 to M16 Connector For Fluence LEDs
Trolmaster
Trolmaster ECS-5 RJ12 to M16 Connector For Fluence LEDs $ 26.22 $ 27.60
The ECS-5 provides a 5/8” diameter connector for some of Fluence brands newer LED fixtures using PushLock Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-5 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / PushLock Waterproof Connector cable.
-13% sale
Trolmaster Hydro-X ECS-2 Lighting Adapter RJ12 to 3.5 Jack 0-10V LED
Trolmaster
Trolmaster Hydro-X ECS-2 Lighting Adapter RJ12 to 3.5 Jack Universal Convertor Cable Set For 0-10... $ 30.30 $ 34.80
  Overview  The ECS-2 cable set is designed to connect Hydro-X to most LED drivers with bare wire +/-  wiring. For connecting to a Hydro X HCS-1 or 2. Use with FGI Uniformity Pro 640 & Uniformity Pro Flex (when not using the WiFi controller), FGI Lightpanel 500 (requires a Cat6 adapter plug). Most LED drivers have a pair of + and - wires which control dimming functions. This adapter set provides a simple screw down wiring terminal with a 3.5mm jack connector and RJ-12 extension wiring allowing simple connection from your LED to the Hydro-X controller.  The ECS-2 comes with a 16 ft RJ12 cable, a Y-splitter and a special 4 ft RJ12 / 3.5mm jack cable. The special cable connects to your lighting fixture / LED driver using the two-screw terminal block to connect to loose wires on the LED driver. Simply connect the two wires from your LED driver to the terminal block, each of the lights being controlled are wired in a “daisy-chain” configuration back to the Hydro-X LMA adapter. ~specifications~ 1 x 16 ft RJ12 Cable 1 x 4 ft RJ12 to 3.5 Jack Cable 1 x T-shaped Splitter 1 x 3.5mm Female Barrel Connector  
-5% sale
Trolmaster DCC-1 Dual Condition Adaptor for Hydro-X system
Trolmaster
Trolmaster DCC-1 Dual Condition Adaptor for Hydro-X system $ 79.80 $ 84.00
The TrolMaster DCC-1 provides a simple solution to control a single device, with more than one condition. For example, people like to turn on their exhaust fans when either temp or humidity is too high; shut off CO2 when turn on exhaust fans. There are many other examples where two conditions can be either combined or split. The DCC-1 is designed to be used in combination with one of TrolMaster’s plug-in style module. (DSC-1, DSH-1/2, DST-1/2 and DSP-1). Once connected to the plug-in module using the RJ12 cable built-into the DCC-1, the DCC-1 will act in concert with that plug-in module to control whatever device is connected to the plug-in module. The DCC-1 can also be set to work in two distinct ways using the “Interlock” function.INTERLOCK OFF: When the DCC-1 interlock is set to be off, EITHER condition that are associated with that pair of modules that are being used together can be activated individually for the device to be activated. (modules used in “parallel”)Examples from above for interlock OFF would be: Turn on an exhaust fan to reduce temp or humidity.Turn on an exhaust fan at night using a recycling timer OR when Humidity is too highINTERLOCK ON: When the DCC-1 Interlock is selected to be on, BOTH conditions that are associated with that pair of modules that are being used together must be activated TOGETHER in order for the device to be activated. (modules used in “series”)Examples from above for interlock ON would be: Shut off a CO2 device when an exhaust fan is runningShut off lights if the temperature gets too warm within the area.
-5% sale
Trolmaster TS-2 Thermostat Station 2 (For Heat Pumps & Conventional HVAC)
Trolmaster
Trolmaster TS-2 Thermostat Station 2 (For Heat Pumps & Conventional HVAC) $ 139.66 $ 147.00
The TS-2 thermostat stations is designed to replace a thermostat connected to a standard HVAC unit. The TS-2 can be used to control most HVAC systems including heat pump and multi-stage HVAC systems. The  TS-2 is wired to the HVAC system using the same low-voltage thermostat cable, and has the standard color-coded wiring as most thermostats. The Hydro-x allows separate Day and Night settings for each of up to (4) TS  modules, so multiple HVAC systems can be controlled by a single Hydro-X system. The TS-2 also has an adjustable delay time for each HVAC systems being activated. That minimizes high start-up (inrush current) and allows up to 4 HVAC systems to be safely controlled. LCD Display, Easy Operation Seamless Connection with Hydro-X Micro-SD for Firmware Upgrade Address Assignment Plug & Play 
-5% sale
Trolmaster MBS-TH Hydro-X Replacement
Trolmaster
Trolmaster MBS-TH Hydro-X Replacement and Backup Temp / Humidity / Light Sensor $ 90.06 $ 94.80
3-in-1 Temp/Humid/Light sensor for the Hydro-X system. Note: This is a replacement or spare part. The main controller comes with a sensor already. Note: This is a replacement or spare part. The main controller comes with a sensor already. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"
-5% sale
Trolmaster MBS-SD Hydro-X Smoke Detector
Trolmaster
Trolmaster MBS-SD Hydro-X Smoke Detector w/RJ12 splitter & 16' cable $ 66.12 $ 69.60
The optional Smoke Detector (MBS-SD) can alert the user to smoke within their growing area at ALL TIMES. Up to 5 smoke detectors can be connected to a single Hydro-x controller. If ANY of the smoke detectors determine there is smoke in the area, the user will receive a user-alert on their phone to alert them to the potential problem BEFORE the problem gets out of hand. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"
-5% sale
Trolmaster DSH-2 240V Humidity Device Station
Trolmaster
Trolmaster DSH-2 240V Humidity Device Station $ 99.18 $ 104.40
The TrolMaster DSH-2 Humidity control / device modules (240V) allow the user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. The DSH modules are rated @ 10-amps. *Use with dehumidifiers less than 7 amps to avoid current overload. LED Power Indicator RJ12 Cable Socket Addressing Plug & Play 
-5% sale
Trolmaster TS-1 Thermostat Station (conventional HVAC cool setting only)
Trolmaster
Trolmaster TS-1 Thermostat Station (conventional HVAC cool setting only) $ 119.70 $ 126.00
The TS-1 thermostat stations is designed to replace a thermostat connected to a conventional cool only HVAC unit. The TS-1 is wired to the HVAC system using the same low-voltage thermostat cable, and has the standard color-coded wiring as most thermostats. The Hydro-x allows separate Day and Night settings for each of up to (4) TS  modules so multiple HVAC systems can be controlled by a single Hydro-X system. specifications LCD Display, Easy Operation Seamless Connection with Hydro-X Micro-SD for Firmware Upgrade Address Assignment Plug & Play 
-10% sale
Trolmaster DSV-1 Low Voltage Control Station
Trolmaster
Trolmaster DSV-1 Low Voltage Control Station $ 85.50 $ 94.80
The Trolmaster DSV-1 is a low-voltage output module that can be used on the HCS-1, HCS-2 controllers. The DSV-1 can be addressed to be used as a temperature, humidity, CO2, or timer device module.Multiple voltage outputs are selectable by the user. The DSV-1 can output either 12 or 24 VDC up to .5 amps, or 12 or 24 VAC up to 4.8VA. Once the module is configured it will activate the low-volt device wired to the DSV-1.This allows the user to directly connect low voltage devices such as solenoids, valves, audio visual alarms or any other device that requires 12 to 24 volt AC or DC power to operate.
-5% sale
Trolmaster DST-2 240V Temperature Device Station
Trolmaster
Trolmaster DST-2 240V Temperature Device Station $ 94.74 $ 99.60
  The TrolMaster DST-2 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps @ 240 volts or less can be controlled by the DST-2. Package Includes: LED Power Indicator RJ12 Cable Socket Addressing Plug & Play
-5% sale
Trolmaster  4RS-1 4 Outlet Expander Station
Trolmaster
Trolmaster 4RS-1 4 Outlet Expander Station $ 165.30 $ 174.00
The 4RS-1 is a universal 4-outlet power expansion module. It can be used with any of TrolMaster’s “plug-in” style device modules to expand the number of devices that can be controlled by the Hydro-x. A single 120-240 volt “trigger” cable on the 4RS-1 connects to your device / control module. When the device module is activated by the Hydro-x, the 4RS-1 trigger cable will turn on each of the 4 receptacles on the 4RS-1 with a 3 second time delay between each outlet being activated. That minimizes high start-up (inrush current) and allows up to 4 devices to be safely controlled. The 4RS-1 must be installed with a 120/240 volt power circuit (up to 50-amps @ 240vac). Three wire terminals inside the unit accept up to #6 AWG wire making connections to the power source easy.
5% sale
TrolMaster TSH-1 Temperature / Humidity Station
Trolmaster
TrolMaster TSH-1 Temperature / Humidity Station $ 147.00 $ 139.66
  The Trolmaster TSH-1 Temperature / Humidity Station is a 0-10 volt analog output control station that works with the HCS-1 and HCS-2 controllers. The TSH-1 can be configured to control either a temperature or a humidity device that requires a variable 0-10 volt input signal. The TSH-1 is capable of controlling variable speed fans, vents or any other device that accepts a 0-10 volt input. It features separate day and night “idle” speed settings built-into the TSH-1 as well as separate Day / Night setpoints accessed through the HCS controller.
-5% sale
Trolmaster DSD-1 Dry Contact Station Single Pack
Trolmaster
Trolmaster DSD-1 Dry Contact Station Single Pack with cable set $ 79.80 $ 84.00
LCD Display, Easy Operation Seamless Connection with Hydro-X Multiple purposes assignment Plug & Play The Trolmaster DSD-1 Dry-contact module provides a simple and flexible solution to who want to connect & control devices to the Hydro-X using a “dry-contact” or relay to activate the device. Some equipment requires either normally open or normally closed contact closure in order to activate the equipment. The DSD-1 is the product that you need to control those types of devices.* The DSD-1 can be configured to work as the other Trolmaster power modules work. The DSD-1 connects into the “devices” line on the Hydro-X and can be set to control an almost infinite number and types of devices such as:Lighting contactorsLight Deprivation curtainsPump contactorsTemperature devicesHumidity devicesCO2 devices* Consult FGI or Trolmaster for questions concerning your particular device. Package Includes: 1 x Dry Contact Station DSD-11 x 16ft RJ12 Cable1 x 4ft RJ12 Cable1 x RJ12 T-Splitter Specifications: Input Voltage: 100~240VAC, 50/60HzOutput Current: 10AOutput Voltage: 100~240VAC, 50/60HzWorking Environment: Temperature 32-122°F, Humidity=90%Packaging Dimensions: 85mm x 80mm x 90mm

60 DAYS EASY RETURNS

FREE US SHIPPING

FAST CHECKOUT

SAME DAY FULFILLMENT

(Orders before 11am pst)