Buy your next SOLUS from the largest AROYA distributor in the US. Use our promo code to save today.  Yield. Quality. You always want more. If you’re a serious grower — even at home – you’re never not ready for big data and analytics. To grow better, you must first know better, and there’s no tool like SOLUS to mine your substrate for insights and help your harvest flourish. Use the SOLUS for easy and quick spot measurements of your substrate, no datalogging required and no information is retained. Water. Temp. EC. All impact the quality and yield of your crop. To level up your home growing requires precision at every stage, across every variable. With SOLUS, you’re in control of it all. Reap a harvest full of insights right on your phone. Simple to download, and even simpler to detect your sensor.  Learn About EC  Mine the insights buried in your substrate The SOLUS Sensor Kit combines the industry’s top soil sensor with a wireless analysis powerhouse. Together with the free SOLUS by AROYA app, they enable high-precision water content, temperature and electrical conductivity spot checks. The information SOLUS gathers helps growers maximize their substrate and unlock maximum yield potential. Learn more about the Solus on our YouTube Channel here:  Quality Legendary sensor technology The product of more than 20 years of soil moisture research and technological refinement, the TEROS 12 sensor is trusted by scientists, farmers and growers alike. The TEROS 12’s ruggedized body lasts ten years or more. Its stainless-steel sensor needles slide easily into any substrate. It even ships with a free reusable sensor installation tool to help growers align the sensor perfectly for consistent, accurate measurements. INCLUDES One TEROS 12 Sensor  One ZSC Handheld Bluetooth Module For App Connectivity APP Download - search AROYA SOLUS on the Apple or Android App stores FEATURES Quick and easy WC, EC and temp spot-checks Secure – won’t store data or monitor measurements over time Wirelessly pairs with any iOS or Android mobile device using Bluetooth Easy installation with installation tool Steel needles cut through the soil for better soil-sensor contact Robust, epoxy body for tough field conditions Dependable, long-life sensor Large volume of influence Ferrite core eliminates cable noise Device Operating System Compatibility and System Requirements The mobile device must be capable of using Bluetooth® Low Energy (BLE). The mobile device operating system compatibility is Apple iOS 10 or greater and Android OS 4.3 or greater. NOTE: Location services must be enabled to use the Bluetooth capabilities of the ZSC. This is a requirement set by the Android operating system (OS). Aroya Solus Manual and Guides Downloads TEROS 12 Operation Manual Download Link  Aroya Solus Quickstart guide Aroya Solus Troubleshooting guide  Aroya ZCS Module Quickstart guide

Elevate Your Plant Growth The FGI Far Red LED Grow Light is a top-tier solution designed to significantly enhance plant growth by delivering 730nm far red energy, which is crucial for optimal photosynthesis. Unlike cheaper 660nm red LEDs, which fail to produce this specific wavelength, the FGI light effectively stimulates growth processes that are otherwise neglected. Its robust, commercial-grade construction guarantees exceptional durability and consistent performance, making it the 730nm choice for both amateur and professional growers seeking to maximize their yields and improve plant health. Scientific Benefits Far-red light (700-760nm) is crucial for optimal plant growth, enhancing photosynthesis and increasing plant size. Studies, such as those from the University of Texas, show that “far-red light boosts overall plant mass and terpene profiles. It improves light absorption, influences leaf angle, and promotes higher yields.”  Read the study here. Far Red light is believed to create a competitive response in plants, pushing desirable terpene production and assisting in the formation of trichomes.   The Emerson Effect Using far-red light just before nighttime increases photosynthesis, cell division, and growth. Implementing a 10-15 minute far-red light cycle after full spectrum lights are off can optimize your growing environment. Recommended Use Ideal for 4x4 grow spaces, this light is easy to install with included hardware, ensuring full coverage and enhanced PPFD delivery. Controls With an low Amp draw at .3 amps, we recommend these units are operated on standard 110V receptacles. One dedicated 15 amp circuit can safely operate more than 30 units. Standard service outlets for fans can easily be used to operate as many units as needed. Standard wall timers can serve as on/off, or they can be connected to Smart plugs, or TrolMaster 4RS-1 Outlet Expansion Module.   Customer Reviews John D.:  “My plants have never been healthier. The far-red light truly makes a difference." Sarah P.: Excellent quality! This light has transformed my growing setup." Far Red Spectrum ~Technical Specs~ Power: 30W Amps: .3 @110V, .14 @ 220V PPF: 72.1 umols/s Voltage; 100-277VAC, 50/60 Hz Size: 44.88” x 2.24” x 1.53” Weight: 4.4 lbs   IP65: water resistant sealed case    Photometric Test Report Download  Product Warranty (see our warranty here) 3 year warranty

The Hydro-X modular system is easy to install and expand, and can be fully customized to your needs. With the free TrolMaster App, you can access all system settings and alerts from anywhere, anytime. The Hydro-X system is compatible with most grow lights brands, HVAC systems, mini-split air conditioners, commercial dehumidifiers and humidifiers, as well as CO2 generators or regulators. So whether you're looking to maintain optimal growing conditions in your indoor garden the Hydro-X system has you covered. Includes the 3 in 1 sensor bundle and RJ12/16 cables. A turn-key environmental sensor system to tune up your gardens success.  This controller is as user friendly as it gets, and installing and setting it up is simple. It's compatible with just about every major grow light, HVAC system, dehumidifier/humidifier, and even CO2 system. You can use the free TrolMaster app, and achieve complete control of your grow room remotely, freeing you from the grow room and getting you back to doing the things you enjoy. What's Included With The Hydro-X System: Hydro-X Environment Controller (x1) 3-in-1 Sensor for Temperature, Light, and Humidity (x1) RJ12 Cable Set (x1) Male-to-Male 16ft RJ12 Cable (x1) Male-to-Male 4ft RJ12 Cable (x1) RJ12 T-Splitter (x1) Achieve Complete Grow Room Control With The Hydro-X With one piece of equipment, you can essentially control anything you need in your grow room. There are more than 17 separate types of control modules, granting you the ability to connect the Hydro-X to A/C's and HVAC  To put it simply, the TrolMaster Hydro-X Environment Controller With 3-in-1 Sensor is the most intelligent and versatile system on the market.  The Hydro-X System Features A Modular Design Another great feature of the Hydro-X Environment Control System is that you can control and customize every last detail of the controller. The modular design means you can configure the separate components in unique ways to create the best environment for your plants because every grow is different. You can control up to 512 different grow lights on two separate channels, and operate different systems simultaneously. Just about every lighting brand and product on the market is compatible with the Hydro-X with different adapters. LMA-11 for Phantom - Lighting Adapter P LMA-12 for Dimlux - Lighting Adapter D LMA-13 for Sun System - Lighting Adapter S LMA-14 Lighting Adapter F for most brands and also FGI brand LEDs LMA-15 for DLI - Lighting Adapter DLI LMA-T for ThinkGrow - Lantern Schedule Adapter F The LMA-14 Adapter can be used for 24 Drivers (LEDs) or 40 Ballasts with either the HCS-1 or HCS-2 Hydro-X controllers. Both the Hydro-X Controllers have 2 line lights giving the ability to control double the amount of each type of light (48 LEDs and 80 Ballasts).  

The LMA-14 lighting adapter is specially designed to control a wide variety of lighting systems including FGI brand LEDs and HIDs. TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option. 

Affordable, compact, extended far red spectrum LED grow light for plants of all types.    Growing tomatoe starts with the FGI Square 2   The FGI Square 2 is an excellent entry level LED grow light for those looking to give their plants the sun's energy. Unlike other lights on today’s market that only provide certain colors needed by plant life (or lack thereof), this one provides all the necessary components: red, orange, yellow green and blue spectrum which together make up the building blocks for successful photosynthesis (and closely matches our sun).  If you are looking for an easy to use LED to learn how to grow any plant types indoors, look no further than the FGI Square 2. Well loved by gardeners everywhere. Designed in the USA by Forever Green Indoors in Seattle WA. Plant lighting LED light experts since 2013. Use the Square 2 to grow all types of plants. Placing the light closer to the plants provides enough energy to match the summer sun. Pulling the light further away, or using the built in dimming, provides the right energy for starts and seedlings.  Learn more about the FGI Square 2 on our YouTube Channel here:  The Square 2 is one of the more efficient grow lights on today's market, using only 220 watts! This means it can produce far less heat than higher wattage lamps. We designed it to deliver the perfect balance of light. It's full spectrum white LEDs help plants grow healthy while adding 5% total deep as well as far-red diodes for an extended range that will optimize your plant growth! Key Features:  Compact size: 20" x 20" x 3" Lightweight: 10 lbs  Built in dimming knob: Adjusts levels for young to mature plants.  Spectrum: Full spectrum plus 5% 660nm deep red plust 730nm far red LED diodes.  Includes: 110V power cord. Two clip and steel cable wire hangars. Product manual.    Technical  PAR Chart at 24" From Diodes The right kind of light can make all the difference for your plants. Flowers, fruits and other high energy use types require levels as high as 1000 PPFD - a measurement that approximates natural sunlight. Spectrum From Our Sun   We design grow lights to closely mimic natural sunlight (shown above). Although it's not possible to exactly duplicate a giant burning ball of hydrogen, we get as close as possible with the Square 2.   Spectrum from the Square 2     Don't wait! We have limited stock on this LED. Buy yours today.     ~Technical Specs~ProductDiodes (White) Brand name: Shenzhen LidedaNumber of pieces 360Total Diode Wattage Capacity (not actual draw) 300WMaximum Advertised Wattage 300Equivalent Wattage 1000CCT 4000KCRI 80CRIOther color Diodes (Red)Brand Name: Shenzhen LidedaNumber of pieces 96CCT NAWavelength 655-665nmOther color Diodes (FR) Brand Name: Shenzhen LidedaNumber of pieces 24CCT NAWavelength 730-745nmRatio mix white/red (%) 3:1Projected Diode Lifetime (L-90) - in hours 50,000 hoursPhotosynthetic Light Measurements PPF Output* 436.1 umol/sPPF Efficacy* PPF 2.1umol/J PPFD Output 900 umols/ms at 24" below diodesPhotopic Light MeasurementsLuminous Flux* 30342lmLuminous Flux Efficacy 151.7lm/wOther Input Power Watts 218Input Voltage 110VCord length 8' (2.44m, 18AWG )Plug type (note if bare whip) Molded 110VProduct Dimensions Dimensions W x L x H (inches) 20x20x3.5Weight (pounds) 10Operating Temp range (F) -20℃ — +40℃IP rating (UL-ETL or estimated final UL-ETL)IP（UL- UL-ETL） IP20Physical Dimensions Package Dimension W x L x H (inches) 24x23x5Inner carton (Yes/No) NOInner Carton Weight NOMaster Outer carton (Yes/No) YESNumber of pieces in Master Carton (1, 2, 3) 1Master carton weight (lbs) 2Dimming / Tuning Dimming (Yes/No) YesProduct Warranty (against manufacturing defects) 3 years Warranty does not include coverage for damage caused by water or exposure to VOC's or electrical damage caused by voltage spikes. We recommend using a basic power surge suppressor such as those found on power strips to protect your light from utility power outages. 

The FGI Dimming Controller provides control over one or many LEDs or 0-10V capeable ballasts. Designed to operate lighting over distances up to 100 feet, the FGI Dimming Controller features robust controls to manage your grow room environment. Connect the controller to an entire room and build sunrise, sunset scenarios to gently wake your plants and put them to bed as nature does in the wild. Or manage rooms and connect several Dimming Controllers to manage strain specific rows or vertical racks of LEDs. Automatically assists in room temperature control by dimming down lights if the temperature setting shows the room is too hot. Adjusts light levels back up when the room is within the setting you choose. Set on and off timers and program sunrise and sunset dimming to mimic natural sunlight and get the most out of your plants.  For use with; All 0-10V dimmable LEDs (see your driver specifications) Not for use with our FGI Hortibest Commercial Series LEDs. Please view the Hortibest Master Controller.   All 0-10V controllable lighting (may require custom wiring - or TrolMaster ECS cable kits which can be used universally.) Control one or many lights.  Programmable Sunrise and Sunset Mode. System over temperature protection built in to protect your plants from accidental overheating in your grow space programming auto-dimming to reduce heat output. Attractive and easy to use touchscreen programming. 110V powered with battery backup. This unit is powerful enough to connect properly daisy chained units up to 30 meters from the control module.   Q&A: Is this Controller an On/Off switch? Not with the V1 version however yes with our new V2 version which will dim the Uniformity Pro 320 and Uniformity Pro 640 to off. This controller can be used with LED drivers which have the ability to dim to zero to turn your light off. It will not eliminate power to the light. It will however turn off the diodes if your driver has dim to zero capability.   Can the FGI Dimming Controller operate non-FGI LEDs? Yes, it can operate any LED that has a driver (power supply) that allows zero to ten volt dimming (0-10V). Consult the specifications of your LED light, or the specifications of the driver/power supply in the light itself. Most drivers have labels affixed to them that indicate their ability to do 0-10V dimming. How can I tell if my driver is 0-10V? 1. Look at the specifications for the model number of the driver, usually printed on a label on the driver. 2. Look for an indication on the label that the driver is 0-10V dimmable. 3. Look for a pair of wires on the driver/power supply that are NOT used to provide power to the light. Typically these are blue/black but can be a variety of colors based on the manufacturer. Can I connect the FGI Dimming Controller directly to the line voltage power on the light? No. Do not connect the Controller directly to line voltage power in your LED. It will damage the controller and void the return. Can this controller turn my LED totally off? Yes for the FGI Uniformity Pro series LEDs. No, it cannot dim the FGI Lightpanel or Lightbar products to off. For non FGI LEDs it depends on the driver/power supply. Consult the specifications for your driver. If the driver has the ability to "Dim To Off", then it is likely but not 100% that our Controller can dim your lights to off. Otherwise they will dim to 10% of the total light output only. Can I connect many lights to one controller? And if so how many? This depends on the distance you are trying to connect your lights over and the quality of the wire you use. We recommend insulated AWG 14 2 lead wire sold here on Amazon. And we also recommend you use IP68 twist connectors also sold here on Amazon to create a water proof, dust proof daisy chain. 3 way IP68 T connectors are ideal for this application. Product Manual Download Warranty: 24 months for manufacturing defects. 

Elevate Your Plant Growth The FGI Far Red LED Grow Light is a top-tier solution designed to significantly enhance plant growth by delivering 730nm far red energy, which is crucial for optimal photosynthesis. Unlike cheaper 660nm red LEDs, which fail to produce this specific wavelength, the FGI light effectively stimulates growth processes that are otherwise neglected. Its robust, commercial-grade construction guarantees exceptional durability and consistent performance, making it the 730nm choice for both amateur and professional growers seeking to maximize their yields and improve plant health. Scientific Benefits Far-red light (700-760nm) is crucial for optimal plant growth, enhancing photosynthesis and increasing plant size. Studies, such as those from the University of Texas, show that “far-red light boosts overall plant mass and terpene profiles. It improves light absorption, influences leaf angle, and promotes higher yields.”  Read the study here. Far Red light is believed to create a competitive response in plants, pushing desirable terpene production and assisting in the formation of trichomes.   The Emerson Effect Using far-red light just before nighttime increases photosynthesis, cell division, and growth. Implementing a 10-15 minute far-red light cycle after full spectrum lights are off can optimize your growing environment. Recommended Use Ideal for 4x4 grow spaces, this light is easy to install with included hardware, ensuring full coverage and enhanced PPFD delivery. Controls With an low Amp draw at .3 amps, we recommend these units are operated on standard 110V receptacles. One dedicated 15 amp circuit can safely operate more than 30 units. Standard service outlets for fans can easily be used to operate as many units as needed. Standard wall timers can serve as on/off, or they can be connected to Smart plugs, or TrolMaster 4RS-1 Outlet Expansion Module.   Customer Reviews John D.:  “My plants have never been healthier. The far-red light truly makes a difference." Sarah P.: Excellent quality! This light has transformed my growing setup." Far Red Spectrum ~Technical Specs~ Power: 30W Amps: .3 @ 110V, .14@ 220V PPF: 72.1 umols/s Voltage; 100-277VAC, 50/60 Hz Size: 44.88” x 2.24” x 1.53” Weight: 4.4 lbs   IP65: water resistant sealed case    Photometric Test Report Download  Product Warranty (see our warranty here) 3 year warranty

Description The optional CO2 Sensor (MBS-S8) measures the CO2 PPM within the growing area. Using the MBS-S8 allows the users to connect and control their supplemental CO2 system using the Hydro-X. *Used in combination with one or more DSC-1 CO2 device modules.

  LED Power Indicator RJ12 Cable Socket Addressing Plug & Play The TrolMaster DSH-1 Humidity control / device modules allow user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. The DSH modules are rated at 10-amps. *Use with dehumidifiers less than 7 amps to avoid current overload. Package Contents:  1 x Device Station 1 x 16ft RJ12 Cable 1 x 4ft RJ12 Cable 1 x RJ12 T-Splitter Specifications: Input Voltage: 100~240 VAC, 50/60Hz Output Current: 10A Output Voltage: 100~240 VAC, 50/60Hz Working Environments: Temperature 32-122°F, Humidity=90% Package Dimensions: 3.3(L) x 3(W) x 3.5(H) in G.W. per pack: 12 oz 

DESCRIPTION Rugged, waterproof, glass lens, 100-277 VAC. This unit is built to last.  Designed to match natural sunlight levels, the FGI UVA LED Grow Light offers extended spectrum Supplemental Blue 340-400 nm with an added PAR Booster to ensure optimal absorption of the light energy. Perfect for indoor growers and plant enthusiasts! The reason for this is that plant morphology is affected by the spectral composition of light, which means that different wavelengths of light can promote different plant growth. In particular, blue light is known to encourage compact growth and strong stems, making it an essential part of plant development. By providing plants with the same level of blue light as they would receive from the sun, the FGI 385nm UV Lightbar ensures that they can grow and develop in the best possible way. As a result, it is an invaluable tool for any gardener or plant lover who wants their plants to thrive. Science behind using UV-A supplemental energy on plants Recent studies at Utah State University have shown that plants absorb and benefit from light between 380-740NM. This research has led to the study of E-PAR or extended PAR and is redefining measurement of photosynthetic light.  Below are the spectrum charts which compare natural sunlight to full spectrum LEDs and then to full spectrum plus supplemental UV.  The result is a closer match to sunlight providing more of the beneficial blue light that plants benefit from.  Sunlight Levels of 380NM UV Natural sunlight provides plants 1.22 umols of 380nm blue energy.  Natural Sunlight Spectrum Blue Energy 1.2234 umols Typical Full Spectrum LED Lack 380NM UV Full spectrum LEDs have limited blue spectrum which peak at 460nm.   Full Spectrum LED 460nm Blue Energy Levels .0514 umols Full Spectrum LED with Supplemental 380NM UV  Adding supplemental 385NM UV creates a secondary peak of blue energy at 1.5047 umols at 12" from the canopy, roughly equaling natural sunlight.  Supplemental UV Spectrum plus Full Spectrum Blue Energy 1.5047 umols (3x greater)  Build Quality These are high quality units with a crystal glass lens cover to protect the diodes and allow for cleaning. The all aluminum frame dissipates what little heat the bar creates. At 30 watts the Lightbar sips energy too.  Spectrum Theory  Blue energy is scientifically known to help form more compact plants. More lush leaf growth, stronger and larger stems and tighter internodal spacing. We gave a prominent researcher at a major State University one our 385NM UVA Lightbars:  "Your UVA lights arrived and we have confirmed their 385 nm peak. This looks like a high quality fixture." He went on to say: "Elevated exposure to UV photons is known to enhance the synthesis of UV blocking compounds in the leaves of many species and it is reasonable to think that UV photons can increase the synthesis of secondary metabolites in plants." And further, "I expect we will find value in dosing of CSat plants with UV photons, but not surprisingly, the effects will likely interact with UV wavelength, intensity, timing of delivery, and growth stage." The UVA Lightbar fits neatly inside the frame of our Uniformity Pro LEDs as well as many other multi-bar style full spectrum LEDs. Use We recommend two of our UV-A LEDs over each 4'x4' area. The slim design allows them to be hung inside the frame of most 6 and 8 bar LEDs. Mounting height should be at the same level to avoid creating shadowing.  Control A basic digital 110V wall timer can be used, or if using the TrolMaster Hydro X we recommend the DSP-1 module for 110V or DSP-2 for 120V power connection and multiple on/off timer programming.   ~Technical Specs~ Product 30W（±5%） 20 UVA Diodes Per Bar 100-277VAC,50/60 Hz 102.3BTU IP65 44.88”x 2.24”x 1.53” 4.4 lbs Photometric File Download Product Warranty (see our warranty here) 3 year warranty

The FGI Flexi-Clone LED grow light is designed to give plant starts the best chance of succeeding. Featuring quality made LED lighting for a reliable outcome, this light is perfect for seedlings, clones, and plant starts. Our 4' long grow bars are able to interconnect, or can be used independently.  Link additional bars side-by-side to increase photosynthetic light intensity. Two bars are perfect for new starts. Four bars work well for younger plants or more light sensitive varieties.  Combine up to 30 Flexi-Clone bars on a single 120/240V plug to run your entire plant propagation area without needing dozens of sockets.  High quality all aluminum construction. Solid state, fanless and driverless design.  LED diodes protected from moisture with a conformal coating. Accidental spray won't affect them at all.  3 year warranty against defects.  Water resistant light to light connectors. Clip on hanging bracket included.  Compare the Flexi-Clone to other plastic seedling lights and you'll see why people choose the flexi-clone system instead. Here is our grow light spectrum compared to the sun and other lighting styles. You can see why plants thrive under our grow spectrum. We more closely match natural sunlight.  The FlexiClone system is fantastic. Your plants will love this light.  Sold as as set of two bars, use two of the Flexi-clone bars to cover 4' x 2' of area.  We stand behind our lights with a 365 day money back guarantee.   Unboxing and Installation Video  ~Technical Specs~ Product FGI Flexi Clone LED Grow Light (set of two) Light Source LED Spectrum 4506 CCT Warm White / Neutral White mixPhotosynthetic Light MeasurementsPPF Output* 69 umols/ms PPF Efficacy* 2.30 Umol/sec/wPPFD @ 12" 115 Umol/m²/sFixture coverage ( max intensity / max uniformity )* 4' x 1' per LED / 4' x 2' per set of two LEDsPhotopic Light MeasurementsLuminous Flux* 8,229 LumensLuminous Flux Efficacy* 136.2 Lm/wIlluminance @ 12" 32,069 LuxOtherInput Power 25 watts per barInput Voltage 100-277VAC autosensingDimensions 47.2”x 1.89”x 1.3”Weight 1.1 lbsOperating Temp range 32 F - 104 FThermal Management PassiveRecommended Mounting height 12" for one set. Add additional bars to increase light levels and mounting heights. Dimming / Tuning No Product Warranty (see our warranty here) 3 years

The HS-1 Humidistat Station from TrolMaster is used to control commercial dehumidifiers. Most larger / commercial dehumidifiers have a “low-volt” control option so the dehumidifier can be controlled by an external humidistat. The HS-1 works and is wired exactly like an external humidistat. The HS-1 is the best way to control your dehumidifiers by eliminating the need to control the high-amperage / inrush current associated with dehumidifiers. LCD Display, Easy Operation Seamless Connection with Hydro-X Micro-SD for Firmware Upgrade Address Assignment Plug & Play Package Includes: 1 x Humidistat Station (HS-1) 1 x 16ft RJ12 Cable 1 x 4ft RJ12 Cable 1 x RJ12 T-Splitter Specifications: Output Voltage: 24V Maximum Current: 1A Working Environment: Temperature 32-122°F, Humidity=90% Packaging Dimensions: 160mm(L) x 86mm(W) x 86mm(H)    

This precise meter provides scientifically accurate Photosynthetic Active Radiation (PAR) light readings under any light source, including LED. And with the purchase of the optional wand, you can get even more accurate readings. Accurate PPFD Light Readings From Any Light Source: Full sun to full shade indoors or outdoors. Artificial light sources (LED, High Pressure Sodium, Metal Halide, Florescent, Halogen…). Three Modes Of Operation: Instant Spot Measurement mode for PAR light readings. Scan mode for quickly averaging PAR over an area. DLI mode shows Daily Light Integral on the LCD (no computer needed). Compares to Apogee Instruments Spectral Reading Range  Additional Benefits/Features Compact and easy to use Water and impact resistant Integral mounting plate acts as a stand, or can be used as a stake. Also includes lanyard or hanger hole for suspending the meter, and magnet mounts. 1/4-20 threaded hole for mounting on tripod or extension wands, selfie sticks. Includes and sensor cover and soft carry pouch. Learn more about the SpotOn PAR Meter on our YouTube Channel here: QUANTUM PAR LIGHT METER SPECS:Range:PAR LIGHT: 0.0 to 6,500 μmol m-2 s-1DLI (Daily Light Integral): 0.0 to 560.0 moles m-2 day-1Display Resolution:PAR LIGHT: 0.1 μmol m-2 s-1 from 0.0 to 99.91 μmol m-2 s-1 from 100 to 6,500DLI: 0.1 moles m-2 day-1Accuracy: +/- 5% (each meter is calibrated to a NIST traceable light sensor on a broad-spectrum light source)Azimuth Error: +/- 1% over 360°Daily Light Integral (DLI): Calculated continuously from light readings every 3 minutesWater Resistant: IP-65 rated for use in rain, irrigation, and condensing environments (do not submerge)Operating Environment: 32-130°F(0-55°C) with 0-100% RH condensing okBattery: CR2032 3v coin cell lithium included (2-year battery life)Size & Weight: 1.75in(4.5cm)W x 5.75in(14.6cm)L x .85in(1.8cm)D0.17lb(77g)

The TrolMaster DST-1 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps at 120 volts or less can be controlled by the DST-1.

The TrolMaster DSP-1 program device module (timer module) works like a multi-function timer. The DSP-1 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x.  Any device that is 10-amps at 120 volts or less can be controlled by the DSP-1.

SpotOn Paper is water sensitive paper to quickly and easily assess your spray coverage. The yellow paper turns blue to allow for quick and easy spray visualization: visualize spray coverage, visualize droplet size and uniformity and visualize off target application. For use with crop spraying to ensure correct application of chemicals, reduce overspray and waste and ensure the correct amounts are applied.  Pack of 25 2" x 3" sheets Does Not Warp In Humid Conditions Economical Alternative To Other Products On The Market Unique Fully Sealed Package Provides Re-Closable Seal Once Opened In House Proprietary Production Process Is Tightly Controlled Includes Tweezer And Desiccant Packet To Improve Shelf Life Comparing three brands of water sensitive paper - Jason Deveau 

About SpotOn Paper is water sensitive paper to quickly and easily assess your spray coverage. The yellow paper turns blue to allow for quick and easy spray visualization: visualize spray coverage, visualize droplet size and uniformity and visualize off target application. For use with crop spraying to ensure correct application of chemicals, reduce overspray and waste and ensure the correct amounts are applied.  Pack of 50 1" x 3" sheets Does Not Warp In Humid Conditions Economical Alternative To Other Products On The Market Unique Fully Sealed Package Provides Re-Closable Seal Once Opened In House Proprietary Production Process Is Tightly Controlled Includes Tweezer And Desiccant Packet To Improve Shelf Life Comparing three brands of water sensitive paper - Jason Deveau

2.25GPM with Tip Wear Indication provides important information about worn sprayer nozzles Quick and accurate flow rate checking of individual sprayer nozzles. This model is best for flow rates below 2.25 GPM typical of herbicide and insecticide application. Our SC-5 model is best for flow rates up to 5 GPM. FEATURES: NO CALCULATIONS OR APP DOWNLOAD REQUIRED: Automatically calculates and displays tip flow rate in GPM, LPM, oz/min, tip wear in %, and application rate in GPA/LPH (just enter your speed and nozzle spacing).FAST AND SIMPLE OPERATION: Readings in about 10 seconds per tip.QUICKLY FIND WORN SPRAY NOZZLE TIPS: Industry guidelines recommend tip replacement once flow rate exceeds that of the new tip by 10%.ACCURATELY MEASURE TRUE TIP FLOW RATE: Today’s high-tech sprayers can only be properly calibrated and confirmed with this knowledge. SPRAYER CALIBRATOR MODEL SC-2 SPECS: Range & Units: 0.02 – 2.25 GPM, 0.08 – 8.52 LPM, 3 – 288 oz/min (GPM in US Gallons) Accuracy: +/- 2% or 1 Digit Resolution: 0.01 GPM, 0.01 L/min, 1 oz/min Fluid Compatibility: Water & Water Based Solutions Only Battery: CR2032 Included (3 Year Battery Life) Size: 3” (7.6 cm) Dia x 8.75” (22 cm) Tall Weight: 0.6 lbs (272 g)

Boost Your Grow with FGI Square 3 WiFi LED Grow Light Maximize yields with smart, full-spectrum lighting Optimized for Maximum Growth The FGI Square 3 WiFi LED Grow Light delivers exceptional full-spectrum lighting, including a 730nm far-red booster to enhance flowering and fruiting. Designed for both professional and hobbyist growers, this 320W light ensures robust plant health and growth. Innovative Features: Full Spectrum Lighting: Covers all essential light wavelengths for vegetative and flowering stages. 730nm Far-Red Diodes: Promotes flowering and fruiting for higher yields. WiFi Connectivity: Control your grow light from anywhere using the free app. High PAR Output: Ensures efficient light distribution and maximum plant absorption. Energy Efficient: Low power consumption with high output. Why Choose FGI Square 3? Enhanced Plant Growth: Tailored light spectrum boosts photosynthesis and plant development. Smart Control: Manage light settings remotely, providing flexibility and convenience. Durable and Reliable: Built with high-quality materials for long-lasting performance. Proven Spectrum: Compare our plant growth spectrum to other lighting types. SMART WiFi Enabled  Use our exclusive Wi-Fi module for additional expanded capabilities.  Convenience and Flexibility: Remote Management: Control the light settings from anywhere using a smartphone app. Adjust intensity, schedules, and spectrum without being physically present. Real-Time Monitoring: Monitor the status of your grow lights in real-time, ensuring optimal conditions for your plants at all times. Custom Schedules: Create custom lighting schedules to mimic natural sunlight cycles, promoting healthier growth. Energy Efficiency: Adjust light settings to optimize energy use, reducing electricity costs. Integration with Smart Systems: Connect with other smart devices for a fully automated grow room. Our customers like Smart control for:  Travel Convenience: If you're away from your grow room, you can still adjust lighting schedules to adapt to changing conditions or plant needs. Efficiency for Commercial Growers: Manage multiple grow lights across different locations from a single device, streamlining operations and ensuring consistency. Immediate Response: Receive alerts for any issues (like power outages) and make instant adjustments to prevent potential plant stress or damage.  Photosynthetic Light Output Charts  PAR readings with the lights at three different distances. At 24" expect PPFD to be above 1000 /ms, but not as uniform.   Square 3 Product Manual  Wifi Controller Manual and Troubleshooting Guide  SPECIFICATIONS FGI Square 3 WiFi LED Grow LightDiodes (White)Diodes Brand name: Shenzhen Lideda Number of pieces 960 CCT 4000K CRI 80CRI Other color Diodes (Red) Brand Name: Shenzhen Lideda Number of pieces 256 CCT NA Wavelength 655-665nm Other color Diodes (FR) Brand Name: Shenzhen Lideda Number of pieces 64 CCT NA Wavelength 730-745nm Ratio mix white/red (%) 3:1Product Warranty/Longevity Warranty (years) 5 years Lifetime (L-90) - in hours 50,000 hours Photosynthetic Light Measurements PPF Output* 1120 umol/s PPF Efficacy* PPF 2.38umols/j Photopic Light Measurements Luminous Flux* 67,000 lm Luminous Flux Efficacy 168 lm/w Other Input Power Watts 320W Input Voltage 110V Cord length 8' (2.44m, 18AWG ) Plug type (note if bare whip) Molded 110V Product Dimensions Dimensions W x L x H (inches) 22 x 22 x 3.5 Weight (pounds) 13 Operating Temp range (F) -20℃ — +40℃ IP rating IP20 Rating CSAPhysical Dimensions Package Dimension W x L x H (inches) 27 x 26 x 6.5 Dimming / Tuning: Push button / Wifi App Product Warranty: 3 years against defects. See our warranty policy page for details. 

The TS-2 thermostat stations is designed to replace a thermostat connected to a standard HVAC unit. The TS-2 can be used to control most HVAC systems including heat pump and multi-stage HVAC systems. The  TS-2 is wired to the HVAC system using the same low-voltage thermostat cable, and has the standard color-coded wiring as most thermostats. The Hydro-x allows separate Day and Night settings for each of up to (4) TS  modules, so multiple HVAC systems can be controlled by a single Hydro-X system. The TS-2 also has an adjustable delay time for each HVAC systems being activated. That minimizes high start-up (inrush current) and allows up to 4 HVAC systems to be safely controlled. LCD Display, Easy Operation Seamless Connection with Hydro-X Micro-SD for Firmware Upgrade Address Assignment Plug & Play 

  TrolMaster modules and sensors all come complete with a RJ12 16ft cable, Y-splitter and RJ12 4 ft cable to connect to the Hydro-x. When connecting modules that are farther apart, you can use the Extension cable set ECS-1. The ECS-1 comes complete with another 16ft cable, Y-splitter and 4 ft cable. Package Includes:  1 x Male-to-Male 16ft RJ12 Cable 1 x Male-to-Male 4ft RJ12 Cable 1 x RJ12 T-Splitter  

DESCRIPTION Rugged, waterproof, glass lens, 100-277 VAC. This unit is built to last.  The FGI 385nm UV Lightbar is designed to provide targeted supplemental blue energy to equal natural sunlight levels. At Forever Green, we strive to match natural sunlight with our lighting products. The reason for this is that plant, corals and mushroom morphology is affected by the spectral composition of light, which means that different wavelengths of light can promote different growth characteristics. In particular, blue light is known to encourage compact growth and strong stems, making it an essential part of plant development. By providing plants with the same level of blue light as they would receive from the sun, the FGI 385nm UV Lightbar ensures that they can grow and develop in the best possible way. As a result, it is an invaluable tool for any gardener or plant lover who wants their plants to thrive. Science behind using UV-A supplemental energy on plants Recent studies at Utah State University have shown that plants absorb and benefit from light between 380-740NM. This research has led to the study of E-PAR or extended PAR and is redefining measurement of photosynthetic light.  Below are the spectrum charts which compare natural sunlight to full spectrum LEDs and then to full spectrum plus supplemental UV.  The result is a closer match to sunlight providing more of the beneficial blue light that plants benefit from.  Sunlight Levels of 380NM UV Natural sunlight provides plants 1.22 umols of 380nm blue energy.  Natural Sunlight Spectrum Blue Energy 1.2234 umols Typical Full Spectrum LED Lack 380NM UV Full spectrum LEDs have limited blue spectrum which peak at 460nm.   Full Spectrum LED 460nm Blue Energy Levels .0514 umols Full Spectrum LED with Supplemental 380NM UV  Adding supplemental 385NM UV creates a secondary peak of blue energy at 1.5047 umols at 12" from the canopy, roughly equaling natural sunlight.  Supplemental UV Spectrum plus Full Spectrum Blue Energy 1.5047 umols (3x greater)  Build Quality These are high quality units with a crystal glass lens cover to protect the diodes and allow for cleaning. The all aluminum frame dissipates what little heat the bar creates. At 30 watts the Lightbar sips energy too.  Spectrum Theory  Blue energy is scientifically known to help form more compact plants. More lush leaf growth, stronger and larger stems and tighter internodal spacing. We gave a prominent researcher one of our UV-A LEDs and he said:  "Your UVA lights arrived and we have confirmed their 385 nm peak. This looks like a high quality fixture." He went on to say: "Elevated exposure to UV photons is known to enhance the synthesis of UV blocking compounds in the leaves of many species and it is reasonable to think that UV photons can increase the synthesis of secondary metabolites in plants." And further, "I expect we will find value in dosing of CSativa plants with UV photons, but not surprisingly, the effects will likely interact with UV wavelength, intensity, timing of delivery, and growth stage." The UVA Lightbar fits neatly inside the frame of our Uniformity Pro LEDs as well as many other multi-bar style full spectrum LEDs. Use We recommend two of our UV-A LEDs over each 4'x4' area. The slim design allows them to be hung inside the frame of most 6 and 8 bar LEDs. Mounting height should be at the same level to avoid creating shadowing.  Control A basic digital 110V wall timer can be used, or if using the TrolMaster Hydro X we recommend the DSP-1 module for 110V or DSP-2 for 120V power connection and multiple on/off timer programming.   ~Technical Specs~ Product 30W（±5%） 20 UVA Diodes Per Bar 100-277VAC,50/60 Hz 102.3BTU IP65 44.88”x 2.24”x 1.53” 4.4 lbs Photometric File Download Product Warranty (see our warranty here) 3 year warranty

3-in-1 Temp/Humid/Light sensor for the Hydro-X system. Note: This is a replacement or spare part. The main controller comes with a sensor already. Note: This is a replacement or spare part. The main controller comes with a sensor already. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"

The ECS-5 provides a 5/8” diameter connector for some of Fluence brands newer LED fixtures using PushLock Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-5 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / PushLock Waterproof Connector cable.

This highly precise meter provides scientifically accurate Photosynthetic Active Radiation (PAR) light readings under any light source, including LED. And with the purchase of the optional wand, you can get even more accurate readings.Accurate PPFD Light Readings From Any Light Source: Full sun to full shade indoors or outdoors. Artificial light sources (LED, High Pressure Sodium, Metal Halide, Florescent, Halogen…). Three Modes Of Operation: Instant Spot Measurement mode for PAR light readings. Scan mode for quickly averaging PAR over an area. DLI mode shows Daily Light Integral on the LCD (no computer needed). Compares to Apogee Instruments Spectral Reading Range  Additional Benefits/Features 32" 3 piece extension wand included  Compact and easy to use Water and impact resistant Integral mounting plate acts as a stand, or can be used as a stake. Also includes lanyard or hanger hole for suspending the meter, and magnet mounts. 1/4-20 threaded hole for mounting on tripod or extension wands, selfie sticks. Includes and sensor cover and soft carry pouch.Learn more about the SpotOn PAR Meter on our YouTube Channel here: ~Technical Specs~QUANTUM PAR LIGHT METER SPECS:Range:PAR LIGHT: 0.0 to 6,500 μmol m-2 s-1DLI (Daily Light Integral): 0.0 to 560.0 moles m-2 day-1Display Resolution:PAR LIGHT: 0.1 μmol m-2 s-1 from 0.0 to 99.91 μmol m-2 s-1 from 100 to 6,500DLI: 0.1 moles m-2 day-1Accuracy: +/- 5% (each meter is calibrated to a NIST traceable light sensor on a broad-spectrum light source)Azimuth Error: +/- 1% over 360°Daily Light Integral (DLI): Calculated continuously from light readings every 3 minutesWater Resistant: IP-65 rated for use in rain, irrigation, and condensing environments (do not submerge)Operating Environment: 32-130°F(0-55°C) with 0-100% RH condensing okBattery: CR2032 3v coin cell lithium included (2-year battery life)Size & Weight: 1.75in(4.5cm)W x 5.75in(14.6cm)L x .85in(1.8cm)D0.17lb(77g)

  Overview  The ECS-2 cable set is designed to connect Hydro-X to most LED drivers with bare wire +/-  wiring. (not necessary when buying the LMA-14 which now includes a screw down adapter).  For connecting to a Hydro X HCS-1 or 2. Use with FGI Uniformity Pro 640 & Uniformity Pro Flex (when not using the WiFi controller), FGI Lightpanel 500 (requires a Cat6 adapter plug). Most LED drivers have a pair of + and - wires which control dimming functions. This adapter set provides a simple screw down wiring terminal with a 3.5mm jack connector and RJ-12 extension wiring allowing simple connection from your LED to the Hydro-X controller.  The ECS-2 comes with a 16 ft RJ12 cable, a Y-splitter and a special 4 ft RJ12 / 3.5mm jack cable. The special cable connects to your lighting fixture / LED driver using the two-screw terminal block to connect to loose wires on the LED driver. Simply connect the two wires from your LED driver to the terminal block, each of the lights being controlled are wired in a “daisy-chain” configuration back to the Hydro-X LMA adapter. ~specifications~ 1 x 16 ft RJ12 Cable 1 x 4 ft RJ12 to 3.5 Jack Cable 1 x T-shaped Splitter 1 x 3.5mm Female Barrel Connector  

The TS-1 thermostat stations is designed to replace a thermostat connected to a conventional cool only HVAC unit. The TS-1 is wired to the HVAC system using the same low-voltage thermostat cable, and has the standard color-coded wiring as most thermostats. The Hydro-x allows separate Day and Night settings for each of up to (4) TS  modules so multiple HVAC systems can be controlled by a single Hydro-X system. specifications LCD Display, Easy Operation Seamless Connection with Hydro-X Micro-SD for Firmware Upgrade Address Assignment Plug & Play 

Buy a Teros 12 sensor from the largest AROYA distributor in the US.  The Teros 12 3 in 1 sensor. New model integrates an 12” lead with a male mini-stereo jack connector for SDI-12 data interchange.  New. Meter Group Inc, Made in the USA. Authorized distributors.  About Water. Temp. EC. All impact the quality and yield of your crop. To level up your home growing requires precision at every stage, across every variable.  Learn About EC Learn more about the Solus on our YouTube Channel here:  Quality Legendary sensor technology The product of more than 20 years of soil moisture research and technological refinement, the TEROS 12 sensor is trusted by scientists, farmers and growers alike. The TEROS 12’s ruggedized body lasts ten years or more. Its stainless-steel sensor needles slide easily into any substrate. It even ships with a free reusable sensor installation tool to help growers align the sensor perfectly for consistent, accurate measurements. Includes One TEROS 12 Sensor  Connection: Mini-stereo plug. Male.  Cable length: 12"    Teros 12 Data Sheet  TEROS 12 Operation Manual Download Link   

The FGI CTB-6 F-Type (full spectrum) is the best grow light we've ever sold.  Premium built LED grow lighting that we’ve tested extensively in the field with experienced growers. (See installs on the YouTube link below). Built to last with premium quality components. They don't build them like this anymore. Full five year warranty.     Product Unboxing Video    Build Quality The CTB-6 660W commercial grow light is constructed to ensure long term performance in any environment.   Heavy duty aluminum enclosure for drivers and controls. Aluminum tube frame that folds open.  Multiple 277 watt solid state drivers power three different LED diode colors. Drivers are digitally programmed to output our patented grow spectrum. Warm white, cool white and red LEDs are tuned perfectly for plant growth indoors. All electrical connections are sealed and epoxied to prevent moisture from affecting the light long term. Diodes are sealed with multiple conformal coatings to protect from VOC's in the grow space.  Photometric tests downloads are below. We're so confident that you'll love this LED that we are extending a 12 month money back guarantee for all units purchased online, here on our site. Volume purchase pricing available. Contact us for a quote. This product comes with a 12 month, no questions asked, money back guarantee.   Control Options Any 0-10V controller. Dims to off. FGI dimming controller - requires wiring harness.  TrolMaster Hydro X Recommended bundle; TrolMaster Hydro X plus LMA-14 Lighting Adapter. Controls up to 60 CTB-6 grow lights. Or add a second LMA-14 on the second channel to control 60 more. All available here on our shopping site (see below).  Highlights 720W Boost Mode Variable dimming knob.  Latest in Lumiled 3535 and Osram long life diodes 1617 PPF @2.58 umols/j (1640 in boost mode) Lifud solid state digital drivers.  Patented grow spectrum controlled by multiple drivers Folds open for easy install Includes rope hangers and heavy duty cable connectors.  110-277 VAC - includes 120V and 240V plug adapters. No special wiring required. Power cord included.  PAR MAP at 24" (Best Uniformity) The CTB-6 demonstrates the most uniform light spread of any multibar LED. At 24" the uniformity is perfect over 16sf of canopy. At 18" PAR increases to 1100 umols/ms.    Isoline view demonstrates light uniformity across bands of PPFD (created in AGI32 by Lighting  Analysts) 800-1100 umols/ms   Spectrum This light is offered in two custom spectrum formulas. Full Spectrum and Bloom Spectrum. Bloom spectrum has 24% additional red and far red output.  Spectrum Our Full Spectrum version produces a balanced 400-700nm output, and less red energy in comparison to the B-Type model. This is accomplished by supplying balanced power to the three independent LED drivers. Our F-Type model produces 1640 PPF for very high intensity PAR on canopy applications.  DLC listed for commercial lighting rebates. We provide rebate program management to maximize your money back. Contact us to learn more.    View More Content On YouTube     Spec Sheet Download  Tear Sheet Download  Photometric Test Reports  (Boost mode, 50% and 100% power) Specifications: DLC Model: CTB6-660W-R1-SH-FS ID: H-CS84WU 5 year warranty.  Diodes: Lumiled & Osram Full Spectrum, Top Bin Long Life  CCT: 3850 CRI: 86 Drivers: Lifud 277W (3 per light) Tuning: Locked in patented light recipe. Bloom and Full Spectrum Versions. Wattage: 660w-720w boost mode output  Voltage: 100-277V AC Autoswitching Plugs: 220-240V Nema Plug. 110-120V Accessory Plugs Included Coverage: 4x4 with CO2. 5x5 No CO2 Dimensions: 47" x 43" x 4"  Hanging Hardware: Rope hangers & Steel V hangers included. Bars: 6 LED bars, conformal coatings.  Cooling: Fanless passive heavy duty design Weight: 37 lbs Controller: Optional   

Replacement cable. Connects the Teros 12 sensor to the Solus ZRC bluetooth module. (Cable not necessary if only operating the Teros 12 sensor without the ZRC module.)

The optional Smoke Detector (MBS-SD) can alert the user to smoke within their growing area at ALL TIMES. Up to 5 smoke detectors can be connected to a single Hydro-x controller. If ANY of the smoke detectors determine there is smoke in the area, the user will receive a user-alert on their phone to alert them to the potential problem BEFORE the problem gets out of hand. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"

Unlock a new level of savings with our premium quality factory-direct FGI Hortibest LED grow lights. Get great performance at prices that cut out the middleman.  Hortibest H3 Slimline 170W Veg LED Grow Light. Perfect for a 4' x 2' space, this veg light is AC daisy chainable for easy installation. With a highly uniform PPFD value, it's ideal for vegetative growth, and the slim design means it won't take up too much space in your grow room. Don't let your plants suffer from poor lighting - invest in a Hortibest LED grow light today! Highlights: Fanless Design IP65 Water and dust resistant Dimmable: 0-10V Daisy Chain Dimming Daisy Chain AC Power Connection OSRAM LED Diodes Input Voltage:120-277VAC Slim Internal Power Supply Design Uniform PPFD distribution over a 2'x4' area DLC listed  The Hortibest Octopus H3 will help your plants reach their full potential. With a sturdy, sleek internal driver design, and a range of adjustable settings, this grow light is sure to give your plants the boost they need to grow strong and healthy. If you're looking for a gentle, uniform light spectrum perfect for veg phase growth, look no further than Hortibest's Octopus H3. The H3 is designed to completely cover a 2'x4' wide tray with consistent light distribution, making it perfect for your indoor horticulture needs. With PPFD of 500 umols/ms, your plants will be getting the ideal amount of light for optimal growth. (at 12")  Link to PDF spec sheet Tech Specs: DLC Listed: H3 170W: OC-H-170A FSG 26 D1 170W 2.5 umols/j PPF 425 umos/ms Osram LED Diodes  Proprietary built in driver (enclosed in light rails) AC power pass through for AC Daisy Chain Dimensions: 47 x 18 x 2 inches Weight: 7.9Ibs  Built in pre-set dimming knob + on/off Dimming: 0-10V Daisy Chain. RJ-14 light to light cable included L90: > 50,000hrs Safety Certification: ETL  

Our new FGI CTB-6 F-Type (bloom spectrum) is the best grow light we've ever sold. It outperforms all others in its class. So good we're calling them Uniformity Pro, a long line of top performing LEDs from Forever Green Indoors.  Premium commercial grade LED grow lighting by CABA Tech, experienced grow light electrical engineers here in Washington. Tested extensively in the field by experienced growers. (See installs on the YouTube link below). Built to last with premium quality components. They don't build them like this anymore. Full five year warranty.  We purchased the entire production run and have over 1000 in stock. Exclusively available from Forever Green Indoors.     Product Unboxing Video    Build Quality The CTB-6 660W commercial grow light is constructed to ensure long term performance in any environment.   Heavy duty aluminum enclosure for drivers and controls. Aluminum tube frame that folds open.  Multiple 277 watt solid state drivers power three different LED diode colors. Drivers are digitally programmed to output our patented grow spectrum. Warm white, cool white and red LEDs are tuned perfectly for plant growth indoors. All electrical connections are sealed and epoxied to prevent moisture from affecting the light long term. Diodes are sealed with multiple conformal coatings to protect from VOC's in the grow space.  Photometric tests downloads are below. We're so confident that you'll love this LED that we are extending a 12 month money back guarantee for all units purchased online, here on our site. Volume purchase pricing available. Contact us for a quote. This product comes with a 12 month, no questions asked, money back guarantee.   Control Options Any 0-10V controller. Dims to off. FGI dimming controller - requires wiring harness.  TrolMaster Hydro X Recommended bundle; TrolMaster Hydro X plus LMA-14 Lighting Adapter. Controls up to 60 CTB-6 grow lights. Or add a second LMA-14 on the second channel to control 60 more. All available here on our shopping site (see below).  Highlights 720W Boost Mode Variable dimming knob.  Latest in Lumiled 3535 and Osram long life diodes 1617 PPF @2.58 umols/j (1640 in boost mode) Lifud solid state digital drivers.  Patented grow spectrum controlled by multiple drivers Folds open for easy install Includes rope hangers and heavy duty cable connectors.  110-277 VAC - includes 120V and 240V plug adapters. No special wiring required. Power cord included. PAR MAP at 24" (Best Uniformity) The CTB-6 demonstrates the most uniform light spread of any multibar LED. At 24" the uniformity is perfect over 16sf of canopy. At 18" PAR increases to 1100 umols/ms.  Isoline view demonstrates light uniformity across bands of PPFD (created in AGI32 by Lighting  Analysts) 800-1100 umols/ms     Spectrum This light is offered in two custom spectrum formulas. Full Spectrum and Bloom Spectrum. Bloom spectrum has 24% additional red and far red output.  Spectrum   Our Bloom Spectrum version includes 15% more 600-700nm wavelengths than our Full Spectrum version. This is accomplished by supplying additional power to the independent warm white LED driver, while reducing power to the cool white LED diodes. Our B-Type model produces 5% more PPF output, in the orange, red spectrum range. DLC listed for commercial lighting rebates. We provide rebate program management to maximize your money back. Contact us to learn more.    View More Content On YouTube     Spec Sheet Download  Tear Sheet Download  Photometric Test Reports  (Boost mode, 50% and 100% power) Specifications: DLC Model: CTB6-660W-R1-SH-FS ID: H-CS84WU 5 year warranty.  Diodes: Lumiled & Osram Full Spectrum, Top Bin Long Life  CCT: 3850 CRI: 86 Drivers: Lifud 277W (3 per light) Tuning: Locked in patented light recipe. Bloom and Full Spectrum Versions. Wattage: 660w-720w boost mode output  Voltage: 100-277V AC Autoswitching Plugs: 220-240V Nema Plug. 110-120V Accessory Plugs Included Coverage: 4x4 with CO2. 5x5 No CO2 Dimensions: 47" x 43" x 4"  Hanging Hardware: Rope hangers & Steel V hangers included. Bars: 6 LED bars, conformal coatings.  Cooling: Fanless passive heavy duty design Weight: 37 lbs Controller: Optional   

The Trolmaster DSV-1 is a low-voltage output module that can be used on the HCS-1, HCS-2 controllers. The DSV-1 can be addressed to be used as a temperature, humidity, CO2, or timer device module.Multiple voltage outputs are selectable by the user. The DSV-1 can output either 12 or 24 VDC up to .5 amps, or 12 or 24 VAC up to 4.8VA. Once the module is configured it will activate the low-volt device wired to the DSV-1.This allows the user to directly connect low voltage devices such as solenoids, valves, audio visual alarms or any other device that requires 12 to 24 volt AC or DC power to operate.

The TrolMaster DSH-2 Humidity control / device modules (240V) allow the user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. The DSH modules are rated @ 10-amps. *Use with dehumidifiers less than 7 amps to avoid current overload. LED Power Indicator RJ12 Cable Socket Addressing Plug & Play 

4 in 1 Tip Tool includes a brush, foldout plastic pick, spanner wrench and utility hook that makes cleaning and repairing sprayer nozzles a breeze.       

SpotOn® Paper is water sensitive paper to quickly and easily assess your spray coverage. The yellow paper turns blue to allow for quick and easy spray visualization: visualize spray coverage, visualize droplet size and uniformity and visualize off target application. For use with crop spraying to ensure correct application of chemicals, reduce overspray and waste and ensure the correct amounts are applied.  Pack of 5 9.75 x 11.75. Also available in 1"x3" and 2"x3". sheets Does Not Warp In Humid Conditions Economical Alternative To Other Products On The Market Unique Fully Sealed Package Provides Re-Closable Seal Once Opened In House Proprietary Production Process Is Tightly Controlled Includes Tweezer And Desiccant Packet To Improve Shelf Life

110V power cord for operating the FGI Flexiclone LED bars individually. One cord comes with every set of two Flexiclone LEDs. This cord allows for separate operation of each LED bar. 

The SpotOn Extension wand for reaching further in to plant canopy to take readings with the SpotOn PAR meter. (SpotOn PAR meter sold separately)  Our rugged three piece steel extension wand can stand up to the harsh conditions of grow rooms. Threaded connections ensure the PAR meter will not twist when fully extended. The rubber handle grip helps keep a solid grip on your meter even with wet hands.  Our large LED screen is easy to read, even in brightly lit rooms at a distance of 3' from the meter. 

The 4RS-1 is a universal 4-outlet power expansion module. It can be used with any of TrolMaster’s “plug-in” style device modules to expand the number of devices that can be controlled by the Hydro-x. A single 120-240 volt “trigger” cable on the 4RS-1 connects to your device / control module. When the device module is activated by the Hydro-x, the 4RS-1 trigger cable will turn on each of the 4 receptacles on the 4RS-1 with a 3 second time delay between each outlet being activated. That minimizes high start-up (inrush current) and allows up to 4 devices to be safely controlled. The 4RS-1 must be installed with a 120/240 volt power circuit (up to 50-amps @ 240vac). Three wire terminals inside the unit accept up to #6 AWG wire making connections to the power source easy.

  The TrolMaster DST-2 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps @ 240 volts or less can be controlled by the DST-2. Package Includes: LED Power Indicator RJ12 Cable Socket Addressing Plug & Play

LCD Display, Easy Operation Seamless Connection with Hydro-X Multiple purposes assignment Plug & Play The Trolmaster DSD-1 Dry-contact module provides a simple and flexible solution to who want to connect & control devices to the Hydro-X using a “dry-contact” or relay to activate the device. Some equipment requires either normally open or normally closed contact closure in order to activate the equipment. The DSD-1 is the product that you need to control those types of devices.* The DSD-1 can be configured to work as the other Trolmaster power modules work. The DSD-1 connects into the “devices” line on the Hydro-X and can be set to control an almost infinite number and types of devices such as:Lighting contactorsLight Deprivation curtainsPump contactorsTemperature devicesHumidity devicesCO2 devices* Consult FGI or Trolmaster for questions concerning your particular device. Package Includes: 1 x Dry Contact Station DSD-11 x 16ft RJ12 Cable1 x 4ft RJ12 Cable1 x RJ12 T-Splitter Specifications: Input Voltage: 100~240VAC, 50/60HzOutput Current: 10AOutput Voltage: 100~240VAC, 50/60HzWorking Environment: Temperature 32-122°F, Humidity=90%Packaging Dimensions: 85mm x 80mm x 90mm

Unlock a new level of savings with our premium quality factory-direct FGI Hortibest LED grow lights. Get great performance at prices that cut out the middle man. Shop and experience the Hortibest difference. Overview   Very high PPF output at 1716 umols/ms High efficacy diodes at 2.6 umols/j 5' long x 6" wide. Tightly spaced diodes produce maximum light levels. Osram top bin diodes in warm white, cool white and deep red creates our FGI spectrum. AC daisy chain - connect up to three LEDs to a single power receptacle. Dims to off with our FGI Hortibest Master Controller  DLC listed. 5 year manufacturer warranty. Featuring Commercial linear 5' long LED grow light for greenhouse or indoor top lighting applications. The 6" wide slim form factor won't block the penetration of sunlight while providing supplementary lighting. For indoor applications, lighting grids should be end to end, with 3' between the rows to achieve 1200 PPF uniformly at 24" above plant canopy.  Industry leading photosynthetic light output. 1716 PPF & 2.6 umols/j. DLC listed for rebates nationwide.  The horizontal heat sinks efficiently dissipate heat to help get a longer lifespan of the light. And the fanless design eliminates fan noise and fan life issues. Our linear LED also comes in several other wattage and size configurations from 330W to 850W output and from 45"-60"/ Contact us to learn more about varying sizes for your lighting applications.  This high-quality light provides great uniformity when mounted in an array, with our digitally tuned spectrum providing just enough artificial sunlight based on years worth experience designing grow lights. it’s 59” length and 660 watts of power supplies ideal light intensity over greenhouse planting rows. This unit replaces HPS lighting on the same grid layout 1:1.  The Shark offers a variety of controller options as well. From TrolMaster to the Hortibest Master Controller. Connect up to 4 on a single 230V power connection with our AC daisy chain accessory cable to cut down on the number of power receptacles needed.        AC Power Daisy Chain Specs Spectrum     PAR Chart 24" - 4'x6' area  Dimming Control  Options Master Controller 2 channel lighting controller for two zones of MH LEDs 2 zone temp and humidity monitoring included  Master Controller    Spec Sheet: Download  Hortibest LED Dimming Control Wiring Diagram Specifications Name: Shark X-15 DLC Product ID: H-J5UG39 Model Number: SH-X-660A FSG 28 D1 Power Consumption: 660W max AC Input Voltage, Single Phase (Three Phase Available Optionally) AC120-277V,50/60Hz  Power Factor > .09 Spectrum: FSG  Efficiency: 2.6 umols/j PPF Output: 1716 @ 660W  (Tested Photometric Performance: 1822 umols/ms @680W 120V) Heat Output: 2244 BTU Environmental Operating Temperature: Min -4 - Max 113°F (Min -20 - Max 45°C) Dimensions: Length 59.1 x Width 5.1 x  Height 7.9 IN (Length 1500 x Width 129 x Height 200 MM) Weight: 27.6 LBS (12.5 KGS) Dimming: 0-10V dimmable to off Dimming Controllers: FGI Hortibest Master Controller  Lifetime: L90: > 50,000 HRS L70: >78,000HRS  IP Rating: IP65/Wet Certifications: ETL / UL 8800 / CE / DLC Warranty: 5 Year Manufacturer Provided Standard Warranty          

Unlock a new level of savings with our premium quality factory-direct FGI Hortibest LED grow lights. Get great performance at prices that cut out the middle man. Shop and experience the Hortibest difference. Overview   High efficacy diodes at 2.8 umols/j 4' long x 4' wide. Perfect Light Uniformity at 1848 PPF output. Osram top bin diodes in warm white, cool white and deep red creates our FGI spectrum. Proprietary built-in driver (enclosed in light rails).  AC daisy chain - connect up to three LEDs to a single power receptacle. Dims to off with our FGI Hortibest Master Controller  DLC listed. 5 year manufacturer warranty.   FGI MH Installation Featuring The H8 660W LED Grow Light is the perfect solution for commercial gardens that need high PPFD output. This unit is designed to be hung under shelves or close to the canopy, and it can be daisy-chained with up to four other units on 240V power. It also has a dimming knob and can be controlled by a variety of 0-10V dimmers, making it a versatile and easy-to-use grow light. Highlights Internal LED driver enclosed within side rails. Daisy Chain (power and 0-10V dimming - depends on voltage supplied) Easy to install. No assembly required. Unfold, plug and play. Comes with 120V and 240V plugs. Comes with rope hangars.  Universal control (TrolMaster, FGI Dimming Controller etc...) The unit is DLC listed for rebates in the US and consumes just 660W of power while outputting 1716 PPF at an efficient 2.6 umols/j.  An internal LED driver keeps the unit streamlined at only 2" deep making it ideal for hanging undershelves or close to ceiling allowing for maximum plant height in the grow space.  It can be power daisy chained, up to 4 units on 240V power, reducing the number of receptacles needed in the grow space.  It ships with a 220V cord with a 110V adapter plug, rope hangars and a 0-10V RJ-16 light to light daisy chain cable.  Options Master Controller 2 channel lighting controller for two zones of H LEDs 2 zone temp and humidity monitoring included  Or can be used to control UV and FAR Red module channels. A second Master Controller would then be used to control two zones.  Master Controller    UV and Far Red LED Modlue   PAR Charts (single unit) Spectrum 3850K Spec Sheet Download  Hortibest LED Dimming Control Wiring Diagram ~ specs DLC: H8 660W: OC-H-660A FSG 27 D1 Weight 23lb Size 42 x 42 x 2 Folding 2244 BTUs Dimming: 0-10V Daisy Chain. RJ-14 light to light cable included  Voltage                          120V     208V      230V     277V AC Current                      5.76A    3.31A    2.99A    2.56AAC Power                        689W    675W    667W    671WPower Factor                   0.996     0.980    0.970     0.945Daisy Chain Quanty         2Pcs     3Pcs       4Pcs     5Pcs  

Get precise and rapid soil moisture, EC and temperature readings with a low profile and long-lasting construction. Accurate and reliable soil readings in a fraction of the time with SpotOn Soil Moisture, EC and Temperature Meter. Featuring continuous reading for quick testing, this meter measures soil moisture, salinity (EC), and soil surface temperature (°F or °C) with ultra high frequency (100 MHz) measuring circuit for accuracy in a variety of soil types and salinity levels. Includes both 2.375” and 1.5” probe rods, and ensures durability with rubber mounted rods that resist bending in dry or rocky soil. Download Spec Sheet Download Instruction Manual Range: Volumetric Water Content: 0.0 - 100.0% m3/m3Electrical Conductivity: 0.0 - 5.00 mS/cm Bulk (dS/m) Temperature: 16°F(-9°C) - 120°F(49°C)   Accuracy: Volumetric Water Content: +/- 3% Electrical Conductivity: +/- 0.1 mS/cmTemperature:  +/- 1°F(0.6°C) Repeatability: Less Than 0.5% variation: VWC, EC, Temp Environmental:  32 - 122°F (0-50°C) Operating RangeIP-64 Rated (Rain and Dust Proof) Battery: (3) AA/LR6 Alkaline Batteries (included) 300 Hrs Continuous On-time Battery Life Meter Automatically Turns Off After 20 Minutes OfInactivity Dimensions:  Meter: 14”(36cm)W x 2”(5cm)D x 35.8”(91cm)L2.4lb(1.1kg) As Shipped: 4.5”(11.4cm)W x 4.5”(11.4cm)D x36.5”(93cm)L 3.3lb(1.5kg)

The TrolMaster DSP-2 program device module (timer module) works like a multi-function timer. The DSP-2 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x. Any device that is 10-amps at 240 volts or less can be controlled by the DSP-2.

  The Trolmaster TSH-1 Temperature / Humidity Station is a 0-10 volt analog output control station that works with the HCS-1 and HCS-2 controllers. The TSH-1 can be configured to control either a temperature or a humidity device that requires a variable 0-10 volt input signal. The TSH-1 is capable of controlling variable speed fans, vents or any other device that accepts a 0-10 volt input. It features separate day and night “idle” speed settings built-into the TSH-1 as well as separate Day / Night setpoints accessed through the HCS controller.

TrolMaster’s Tent-X Base Station (TCS-1) is a state-of-the-art professional-grade and modularly designed environmental and irrigation control system. It is designed for single-zone grow tents. Thanks to the controller’s compact hydroponic capabilities, it allows the user to effectively control their tent’s environmental parameters and irrigation schedule with a single control system. Whats Included With The Hydro-X System: Tent-X Environment Controller (x1) 3-in-1 Sensor for Temperature, Light, and Humidity (x1) RJ12 Cable Set (x1) Male-to-Male 16ft RJ12 Cable (x1) Male-to-Male 4ft RJ12 Cable (x1) RJ12 T-Splitter (x1)    

The template correctly aligns the Teros 12 sensor for various grow mediums. 

TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.  The LMA-T works specifically with the ThinkGrow LED systems to provide two channel control, which allows separate control for full spectrum and second red output levels on the ThinkGrow LEDs. The LMA-T simply connects to the lighting control ports Line 1 and Line 2 on the HCS-1. Once connected, the user can then set individual ON and OFF times and the dimming settings for the full spectrum LEDs and also for the second red LEDs. The LMA-T then is connected to the RJ type lighting control cables where each of the LEDs are connected back to the controller in a daisy-chain configuration using plug-and-play connections. One adaptor could run up to 256 ThinkGrow LEDs.   1x LMA-T   1x RJ12 to customized waterproof connecter  * Convert RJ12 to Water Proof Connector Cable included.