All our grow tech

ThinkGrow
ThinkGrow PA-1 240V to 120V Plug Adapter...
$ 13.00
ThinkGrow 240V to 120V Plug Adapter for US

Trolmaster
TrolMaster Tent X Tent-X Main Controller with...
$ 316.95
TrolMaster’s Tent-X Base Station (TCS-1) is a state-of-the-art professional-grade and modularly designed environmental and irrigation control system. It is designed for single-zone grow tents. Thanks to the controller’s compact hydroponic capabilities, it allows the user to effectively control their tent’s environmental parameters and irrigation schedule with a single control system.
Whats Included With The Hydro-X System:
Tent-X Environment Controller (x1)
3-in-1 Sensor for Temperature, Light, and Humidity (x1)
RJ12 Cable Set (x1)
Male-to-Male 16ft RJ12 Cable (x1)
Male-to-Male 4ft RJ12 Cable (x1)
RJ12 T-Splitter (x1)

ThinkGrow
ThinkGrow ECS-9 12ft RJ12 to 4-pin IP65...
$ 24.00
The ThinkGrow ECS-9 RJ12 to 4pin connecter cable is simply a 12 ft cable to use with Lighting Control Adapter T (LMA-T) and ThinkGrow LEDs with Threaded Waterproof connecters for interconnecting.

Trolmaster
TrolMaster Hydro X LMA-T Lighting Adapter For...
$ 95.55
TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.
The LMA-T works specifically with the ThinkGrow LED systems to provide two channel control, which allows separate control for full spectrum and second red output levels on the ThinkGrow LEDs.
The LMA-T simply connects to the lighting control ports Line 1 and Line 2 on the HCS-1. Once connected, the user can then set individual ON and OFF times and the dimming settings for the full spectrum LEDs and also for the second red LEDs.
The LMA-T then is connected to the RJ type lighting control cables where each of the LEDs are connected back to the controller in a daisy-chain configuration using plug-and-play connections.
One adaptor could run up to 256 ThinkGrow LEDs.
1x LMA-T
1x RJ12 to customized waterproof connecter
* Convert RJ12 to Water Proof Connector Cable included.

ThinkGrow
ThinkGrow TDC-120 7ft Splitter Power Cord for...
$ 24.00
TDC-120 power cord with NEMA 5-15 plug is a 7ft split power cord for the new Model-One System and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable.
Each “group” of Model One drivers or ICL-300 must be connected to power using one of the TDC-1 cables, or one of the EC-120 or EC-240 power cables (120 or 240 volt).
The TDC-120 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

ThinkGrow
ThinkGrow TDC-4 5’ Daisy Chain Cord for...
$ 22.00
The TDC-3 Daisy Chain Power Cord is specially designed for the new Model-One or IVL-300 inter-canopy LED System to interconnect between the LED drivers.
The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt).
The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.
The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

ThinkGrow
ThinkGrow TDC-2 12” Daisy Chain Connector for...
$ 16.00
the TDC-2 is a 12” daisy chain connector for Model One or ICL-300.
It requires one TDC-1 splitter power cord (to connect to power and the first LED bar or driver). And is specially designed for the new Model-One System and ICL-300 inter-canopy LEDs, and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end.
The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable.
Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt).
The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

ThinkGrow
ThinkGrow TDC-1 Splitter Power Cord for Model...
$ 20.00
The TDC-1 splitter + power cord is specially designed for the new Model-One or ICL-300 System and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end.
The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt).
The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

ThinkGrow
ThinkGrow ECS-7 12'Daisy chain control cable
$ 24.00
Designed to daisy-chain (interconnect) multiple LEDs to the TrolMaster controller, applicable to all ThinkGrow LEDs including Model-I / Model-I Plus, Model-H, Model-W and Model-V LEDs. Note: This is a replacement or spare part. Every LED fixtures come with a ECS-7 already.

Ace Of Spades
FGI Ace of Spades Premium Myco Grow...
$ 14.95
Built for professionals who won’t take chances growing.
Our premium bags are crafted with advanced technology for increased durability. Expertly designed after extensive mycologist input. Unmatched thickness and size.
Prevents contamination
Supports heavy-duty use
Reusable
Ideal for professional mycologists
Our top-quality Ace Of Spades Premium Myco Grow Bags were made for discerning mycologists. Avoid contamination using Ace's and ensure successful sterilization with our reliable bags.
Built To Perform
Our design specifications called for heaviest duty premium grade 8mil polypropylene material.
8mil heaviest duty PP prevents accidental breakage.
Contamination Control
The filter includes a finer nylon mesh that improves airflow and particle filtration, especially from airborne molds.
Refined poly mesh .2 micron filter stops all airborne contams in their tracks.
Commercial Size
Ours come in a standard size of 8' x 5' x 20' x 8mil and have neatly trimmed and upgraded welded seams for rugged structural integrity.
Large 10 gallon capacity for commercial production. Heaviest duty welds won’t fail even if dropped or while being sterilized.
Suitable for various mushroom cultivation purposes, our bags have a thicker PP gauge and increased load-bearing capacity, stand up to higher temperatures, pressures and won't fail during sterilization.
Compare our quality to theirs
Their bag failed over time. Weak 6mil PP fractured at the injection site. And grew over time.
Don’t take risks. Choose Ace Of Spades.
Designed and built by Forever Green Indoors for Mycologists who need ruggedly built dependable mushroom grow tech.
Specifications
Max pressure: 10-25 PSI pressure (1.5-2 kg/cm²)
Max temp: 262°F (128°C)
Filter: 0.2-micron
PP: 8 mil
Pre-sterilized

Trolmaster
TrolMaster Hydro X WD-2 Water Detector
$ 72.00
The optional Water Detector WD-2 allows the user to detect water leaks or water on the floor of the facility. Simply place the water sensor at floor level (or wherever you want to watch out for water leaks). Up to 5 Water detectors can be connected to a single Hydro-x controller. If ANY of the sensor detects a water leak, the unit will send a user-alert to notify user of a water leak.

Hortibest
Hortibest H8 720 Watt Full Spectrum LED...
$ 799.00
Premium quality factory-direct FGI Hortibest LED grow lights. Get great performance at prices that cut out the middle man. Shop and experience the Hortibest difference.
Overview
Our highest efficacy and output at 2.7 umols/j
Higher hanging height over a 4' x 4'. Perfect Light Uniformity at 1944 PPF output.
Osram top bin diodes in warm white, cool white and deep red creates our FGI spectrum.
AC daisy chain - connect up to three LEDs to a single power receptical.
Dims to off with our FGI Hortibest Master Controller
DLC listed. 5 year manufacturer warranty.
With optional far red and UV outrigger. Add our three channel Master Controller and take full control over your lighting.
Featuring:
Looking for a powerful and efficient LED grow light to help you get the most out of your plants? Look no further than the Hortibest H8 Slimline 720W LED Grow Light!
Our 720W LED will blow your plants socks off at 1944 PPF. Grow in PAR levels as high as 1500 umols/ms at 12" from canopy. This light rocks efficiency at 2.7 umols/j - a measure that compares power consumed versus light output.
We use the latest multi-package diodes to produce full spectrum light that your plants will love.
Ideal for 4' x 4' spaces, this light has multiple settings to help you optimize growth and yield. Need to tone it down a bit? The built in dimming knob makes it quick and easy without complex controls required.
With the extended daisy chain for power (not just dimming), you'll be able to easily connect multiple lights for even coverage.
Get the perfect growing conditions for your plants with the Hortibest H8 Slimline 720W LED Grow Light!
Highlights
Osram LED diodes, proprietary built in driver (enclosed in light rails)
5 year warranty
DLC Listed
1944 PPF
2.7 umols/j
Spectrum controllable with optional Moray UV-A and Far Red Module. Now shipping.
AC Daisy Chain (power and 0-10V dimming - depends on voltage supplied)
Easy to install. No assembly required. Unfold, plug and play.
Comes with 120V and 240V plugs.
Comes with rope hangars.
Universal 0-10V Control. (TrolMaster, FGI Dimming Controller etc...)
Super high PPF output of 1944 umols/s allows for a higher hanging height over canopy, up to 24" at over 1000 PPFD.
DLC listed for rebates in the US, this light is made by a top factory in China and distributed by Forever Green Indoors.
Osram LEDs, and a super unique built in internal driver with light-to-light daisy chaining to power which reduces the number of outlets that need to be installed in the grow space. For example; at 240V, 4 units can be daisy chained to a single receptacle at 2.9 amps per light.
The H8 is lightweight at 23 lbs, and compact in size at 42"x42"x2" with its internal driver. This unit is less expensive to ship and easier to hang and manage than heavier or larger LED lights.
As with all our LEDs it uses a fanless design. Does not make noise and produces a relatively low amount of heat output at 2448 BTUs.
PAR Chart (Single unit)
Spectrum 3850K
Options
Master Controller
2 channel lighting controller for two zones of MH LEDs
2 zone temp and humidity monitoring included
Or can be used to control UV and FAR Red module channels. A second Master Controller would then be used to control two zones.
Master Controller
UV and Far Red LED Module
Spec Sheet
Hortibest LED Dimming Control Wiring Diagram
~ specs
DLC Listed: H8 720W: OC-H-720A FSG 28 D1
Fanless Design
IP65 Wet Rated
Dimming: 0-10V Daisy Chain. RJ-14 light to light cable included
Proprietary built in driver (enclosed in light rails)
AC power pass through for AC Daisy Chain
Slim design and 180 degree foldable
Input Voltage:120-277VAC
42" x 42" x 2" (1067 x 1077 x 50mm )
Weight 22.7Ibs (10.3kg)
AC Voltage 120V 208V 230V 277V
AC Current 6.26A 3.55A 3.18A 2.66AAC Power 748W 729W 720W 714WPower Factor 0.996 0.987 0.983 0.969Daisy Chain Quanty 2Pcs 3Pcs 4Pcs 5Pcs
Heat Output 2448 BTU/h
Max 6.7A@120VAC; Max 3.9A@208VAC;Max 3.5A@230VAC; Max 2.9A@277VAC;
5 Year Standard Warranty
link to product spec sheet download

Hortibest
Shark-X 2600 Linear 6' Long LED Grow...
$ 1,399.00
The Shark-2600, with 850W of power, is ideal for greenhouses and hydroponic environments. Compatible with AC 200-277V, it delivers consistent and powerful lighting. Its robust design and IP65 waterproof rating ensure reliable operation, providing growers with a durable solution for enhanced crop growth.
Supplemental Lighting for Greenhouse
Shark-XR series is designed for the greenhouse to provide supplemental lighting at night or on cloudy days.Slim Form FactorShark-XR series comes with slim form factor, which won't block the penetration sunlight while providing supplementary lighting.High EfficiencyWith up to 3.0 umol/J, the Shark-XR Series LED grow lights provide high efficiency for maximizing light output.Light Intensity ControlWith the ability to dim the lights, the Shark-XR Series LED grow lights allow you to adjust the light intensity to meet your plants’ needs.Daisy ChainingThe Shark-XR Series LED grow lights can be daisy chained together, allowing for easy installation and scalability.

Hortibest
HortiBest JF-3000 LED Grow Light – 900W...
$ 1,399.00
The HortiBest Jellyfish JF-3000 LED Grow Light is the perfect solution for growers looking to upgrade from traditional HPS lighting or optimize new greenhouse and indoor setups. Designed with efficiency and durability in mind, the JF-3000 offers 900W of advanced LED lighting technology, delivering high-intensity, full-spectrum light that promotes vigorous growth and maximizes yields.
With a DLC certification and a robust lifespan of over five years, this light ensures reliable performance with minimal maintenance. Its fanless, waterproof design ensures silent operation and long-term durability, even in demanding greenhouse environments.
Whether you're cultivating leafy greens, fruits, or flowering plants, the JF-3000’s optimized spectrum and versatile design make it a standout choice for modern horticulture.
Efficient Lighting Performance: Delivers 3000 µmol/s with a PPFD of 1500 µmol/m²/s at 2.5 ft, ensuring optimal light distribution for all stages of plant growth.
Energy Savings: Consumes only 900W, offering a 1:1 replacement for HPS lights while significantly reducing operational costs.
Durability You Can Trust: DLC-certified with a lifetime of ≥5 years at 12 hours/day. Features a no-PC-lens optical design for no yellowing, spectrum drifting, or light decay.
Greenhouse & Indoor Use: IP65 waterproof rating, passive thermal management, and specialized spectrum ideal for vegetables, fruits, and herbs.
User-Friendly Design: Plug-and-play installation with dimming (0-10V) and daisy-chaining capabilities (up to 3 units at 240V) for centralized control.
Enhanced Growth: Tailored spectrum to supplement natural sunlight or support indoor hydroponics, enabling healthier crops and higher yields.
Spec Sheet Download

Hortibest
Hortibest JF-3600 LED Grow Light – 990W...
$ 1,595.00
The Hortibest JF-3600 is a cutting-edge LED grow light designed for professional indoor and greenhouse cultivation. Featuring a patented no-PC lens design, the JF-3600 eliminates yellowing, spectrum drift, and light decay for consistent performance over time. With dual-channel control, growers can fine-tune the light spectrum to match specific growth phases, optimizing photosynthesis and plant health.
Replaces DE-HPS lights on a 1:1.5 footprint. Covers 5' x 6' grow spaces at over 1250 umols/ms PPFD.
Built to withstand challenging environments, this grow light offers IP65-rated protection against moisture and dust. Its high-output performance delivers an impressive PPF of 1600 μmol/m²/s and is perfect for large-scale, energy-efficient growing operations. The JF-3600 also supports daisy-chaining up to three units, making it an ideal solution for scalable cultivation.
High Efficiency: 990W power consumption with 1600 μmol/m²/s PPF for robust plant growth.
Dual-Channel Spectrum Control: Adjustable spectrum to optimize for various growth stages.
Patented No-PC Lens: Prevents yellowing, spectrum drift, and light decay for consistent output.
IP65 Rated: Protected against moisture and dust for reliable operation in wet conditions.
Daisy-Chain Compatibility: Connect up to 3 units on 277V circuits for scalable solutions.
Wide Voltage Support: Operates at AC200-277V with 0-10V dimming control for versatility.
Compact Design: Sleek dimensions (34 x 14 x 4 inches) ensure easy installation.
Reduced Heat Output: Efficient cooling with 2627 BTU/h heat output, ensuring plant safety.
Spec Sheet Download

Hortibest
Hortibest H15L 4' x 9' 1500W 200-277V...
$ 1,399.00
Octopus-H15L 1500W LED Grow Light
The Octopus-H15L is a premium full-spectrum 1500W LED grow light, designed specifically for commercial cultivation projects. This light ensures optimal photosynthetic performance for high-quality plant growth. Its 5-year warranty and certifications (ETL, CE, UL8800) guarantee long-lasting reliability and safety.
The H15L, a 1500W powerhouse, is the ultimate solution for large-scale greenhouses and farming facilities. Compatible with AC 200-277V systems, this grow light features a specialized spectrum to boost plant health and yields. Its rugged, waterproof design ensures exceptional durability in any growing condition.
With a foldable 180° design, the Octopus-H15L is easy to install and maintain. It features an AC dimming daisy chain capability and a rotary dimmer for precise light intensity control. The built-in driver and ample space for supplementary bars make it a versatile solution for growers looking to optimize their setup.
Key Features:
• Light Intensity: 3900 PPF with 35% energy savings.
• Efficiency: High-performance 2.6 μmol/J.
• Design: Foldable 180°, space-saving for easy setup.
• Dimming: Rotary dimmer and daisy chain functionality for tailored light control.
• Spectrum: SME Full Spectrum for all growth stages.
• Durability: IP66 waterproof rating with 50,000-hour lifespan.
Perfect for Commercial Growing:
Designed to support indoor plant cultivation with uniform light distribution and a wide 4’ x 9’ (1219mm x 2744mm) coverage area, this fixture is ideal for large-scale grow operations, including vertical farms and greenhouses. Its eco-friendly design reduces energy consumption by 35%, making it both efficient and sustainable.

Hortibest
Hortibest H10L 6' x 4' 900W 200-277V...
$ 1,195.00
The H10L is a 900W LED grow light tailored for hydroponic and indoor plant environments. With an AC 200-277V voltage range, this light provides a tailored spectrum that maximizes growth during flowering stages. Its durable build and waterproof rating make it a reliable addition to any advanced horticultural setup.
Powerful PAR Output
Harness the exceptional performance of the Octopus-H10L LED grow light, boasting an impressive PAR value of 3.0 μmol/J. This high PAR output ensures your plants receive the optimal photosynthetically active radiation (PAR) needed for strong, healthy, and consistent growth.
Versatile Full-Spectrum Lighting
Featuring a comprehensive SMF full spectrum, the Octopus-H10L supports every stage of plant development—from seedlings to flowering. This spectrum promotes vigorous growth and helps maximize yield potential, making it ideal for all phases of cultivation.
Expandable Daisy Chain Connectivity
Streamline your growing setup with the Octopus-H10L’s daisy chain functionality. Easily connect multiple units to scale up your grow space while maintaining uniform and efficient lighting. Perfect for large-scale operations, this feature ensures consistency across your entire canopy.
Intense and Even Light Distribution
Achieve unparalleled intensity and uniformity with the Octopus-H10L. Engineered for consistent light delivery, it provides even illumination across your grow area, ensuring every plant receives the ideal light intensity for healthy and vigorous growth.
Spec Sheet Download
DLC Test Report Download

Hortibest
Hortibest OF6-2600 4' x 4' 760W 200-277V...
$ 998.00
Hortibest OF-2600 Product Description:
The Hortibest OF-2600 is a 760W high-performance LED grow light designed for both hydroponic and traditional farming systems. It combines advanced technology with durability to optimize plant growth and maximize harvests across all growth stages.
• Optimized Power & Versatility: Operating at AC 200-277V, the OF-2600 features a versatile full-spectrum light tailored for seedling, vegetative, and flowering phases.
• Superior LED Technology: Built with advanced Osram anti-sulfuration LEDs, ensuring exceptional reliability, reduced degradation, and consistent performance over time.
• Certified Longevity: DLC certified with less than 10% light decay over 5 years of use at 12 hours per day.
• Expansive Coverage: Compact yet powerful, it measures 4’ x 4’ in size and delivers a wide 4’ x 5’ coverage area, enhancing the effective planting area of your canopy.
• Durable Construction: Designed with an IP65 waterproof rating, the OF-2600 is built to withstand demanding conditions in grow tents and commercial farming facilities.
Built to meet the needs of professional growers, the Hortibest OF-2600 ensures robust plant development, reliability, and increased yields for thriving crops season after season.

Hortibest
Hortibest OG8-2700 4' x 4' 850W 200-277V...
$ 1,399.00
Product Description:
The Hortibest OG8-2700 is a high-performance commercial-grade LED grow light designed for professional cultivators seeking precise control over plant growth and resin production. Engineered for dual-channel spectrum tuning, this powerhouse delivers unparalleled flexibility, allowing growers to fine-tune the red spectrum intensity to optimize photosynthesis, flowering, and the Emerson Effect for enhanced cannabinoid production.
Key Features:
Powerful 2700 µmol/s PPF Output – Industry-leading photon efficiency drives robust plant growth with deep canopy penetration.
Dual-Channel Spectrum Tuning – Adjust full spectrum white and deep red light independently for fine-tuned plant responses.
Red Spectrum Control for Flower Production – Use the red channel separately post-lights-off to stimulate phytochrome reactions and accelerate flower bulking.
Supports Emerson Effect Strategy – Unlock next-level efficiency by running far-red after the main lights shut down, optimizing flower density, yield, and resin production.
Seamless Integration with TrolMaster & Hortibest Controllers – 0-10V dimmable with precise automation.
IP65 Waterproof & Commercial-Grade Build – Designed for high-humidity grow environments with durability in mind.
Optimized 4' x 4' Canopy Coverage – Even PPFD distribution ensures consistent growth from top to bottom.
The Power of Dual-Channel Spectrum Tuning
Unlike standard LED fixtures, the OG8-2700 allows growers to manipulate red light intensity independently from the full spectrum. This enables strategic flowering phase control, supporting increased biomass, cannabinoid profiles, and terpene expression.
Full Spectrum (Daylight): Ideal for veg and flower, ensuring strong structural growth and photosynthetic efficiency.
Red Spectrum (Far-Red & Deep Red): Used independently after main lights turn off to trigger the Emerson Effect, promoting quicker flowering transitions, increased resin production, and faster growth rates.
Hortibest OG8-2700 Specs:
Specification
Details
Model
Hortibest OG8-2700
Power Output
850W ±10%
PPF (Photon Flux)
2700 µmol/s (380-780nm)
PPFD @ 1ft
1500 µmol/m²/s
Spectrum
Dual-Channel (Full Spectrum + Red)
Dimming
0-10V (Compatible with TrolMaster & Hortibest Controllers)
Red Channel Control
Independent activation for Emerson Effect
AC Input Voltage
120-277V, 50/60Hz
Current Draw
4.09A @ 208V / 3.07A @ 277V
Heat Output
2006 BTU/h
IP Rating
IP65 (Waterproof, Wet Location Rated)
Coverage Area
4' x 4'
Weight
24.9 lbs (11.2 kg)
Dimensions
47" x 47" x 2.16" (1193 x 1193 x 72mm)
Daisy Chain Capability
Yes (Up to 3 max @ 200-240V, 4 max @ 277V)
Spec Sheet Download
DLC: OC-G-850A8 DWF

Hortibest
Hortibest OG8-3300 4' x 4' 900W 200-277V...
$ 1,599.00
Product Description:
The OG8-3300 sets a new standard in horticultural lighting with its advanced tri-channel spectrum tuning, enabling precise control over spectral output to meet the unique demands of different plant types and growth stages. Designed for professional growers, this 900W fixture operates with unparalleled efficiency and flexibility, ensuring optimal light delivery for maximum yield and energy savings. Its robust IP65-rated construction guarantees reliability in even the most challenging environments.
Constructed with aviation-grade aluminum, the OG8-3300 offers superior heat dissipation, ensuring consistent performance and extended operational life. With an IP65 waterproof rating, it is built to withstand challenging environments, including humid greenhouses and grow tents, without compromising functionality.
This state-of-the-art fixture combines exceptional energy efficiency with high-intensity light output, making it the ideal solution for commercial growers aiming to maximize yield while reducing operational costs. Designed to meet the demands of high-end cultivation facilities, the OG8-3300 is the pinnacle of reliability, durability, and performance in professional horticultural lighting.
Key Features:
• Tri-Channel Spectrum Tuning:
• Offers customizable spectrum adjustments across Blue (450nm), Deep Red (660nm), and Far Red (730nm) for precise plant light requirements.
• Supports targeted growth phases, from germination and vegetative growth to flowering and fruiting stages.
• Ensures ideal light conditions for a wide variety of plant species, including flowers, vegetables, and specialized crops.
• High-Efficiency Lighting Performance:
• Delivers an impressive efficacy of 3.3 µmol/J, maximizing photosynthetically active radiation (PAR) for enhanced productivity.
• Achieves a PPF output of 1271 µmol/m²/s for uniform light distribution and consistent plant development.
• Robust and Durable Design:
• Constructed with aviation-grade aluminum for superior heat dissipation and long-term performance.
• IP65-rated for protection against dust, water, and humidity, ideal for indoor grow operations and greenhouses.
• Intelligent Control and Integration:
• Compatible with 0-10V dimming for seamless light intensity adjustments.
• Supports daisy-chaining up to 3 fixtures per circuit at 230-277V, reducing wiring complexity and installation costs.
• Integrates with the Hortibest Mini Master Controller, managing up to 75 lamps per zone for large-scale operations.
• Energy-Efficient Operation:
• Wide voltage compatibility (AC 200-277V) ensures efficient power usage across diverse installations.
• Low total harmonic distortion (THD ≤ 15%) enhances operational efficiency and grid stability.
• Long-Lasting Reliability:
• Designed for a lifetime exceeding 50,000 hours, with robust performance guaranteed for 5+ years at 12-hour daily operation.
• Passive thermal management ensures quiet, low-maintenance operation.
• Additional Features:
• Flexible installation with optional accessories like RJ45 dimming cables, ratchet ropes, and extension cables.
• Compact dimensions (48”x48”x2.76”) and lightweight design (29.5 lbs) simplify handling and setup.

Hortibest
Hortibest Jellyfish JF-850A 850W LED Grow Light....
$ 1,295.00
The Hortibest JF-850A LED Grow Light boasts Osram high output diodes and a full spectrum design for optimal plant growth. With a 850W output level, it is a 1:1 replacement for HPS lights, using existing electrical cables.
1:1 replacement from HPS
Compact design with excellent heat dissipation
Various Spectrum options for sole and supplementary lighting
Design for both greenhouse and indoor grow room
Featuring power and dimming daisy-chain capabilities, the Hortibest JF-850 LED Grow Light offers centralized control for a streamlined installation. Equipped with an integrated power supply, it ensures a hassle-free setup process.
Most efficient spectrum
Lighting layout PAR MAP at 18"
Maximize your indoor gardening potential with the Hortibest JF-850A LED Grow Light. It covers up to a 5'x5' area, promoting healthier and more abundant yields. Achieve optimal plant growth with its high spectral efficiency of 2.89 umol/j.
Choose between multiple spectrum outputs to meet your specific goals. Full spectrum, full spectrum plus far red or full spectrum plus far red and blue.
DLC Product ID: H-2GQYXZ
Spec / Tear Sheet
Product Brochure
Project Install Photos
Model
Jellyfish 850A
Power850
W
AC input Voltage
AC120-277
Spectrum
SRF
Efficacy
2.89 umol/J
PPF(umol/s)
2550 umol/s
Heat Output
2901 BTU/h
Thermal Management
Passive
Operating Temperature
-4-113 (-20-45℃)
Storage Temperature
-40-176 (-40-80℃
Power Factor
≥0.96
Light Distribution
120°
Dimming
0-10V
Demission
745x290x108mm
THD
<15%
Lifetime
50000h
IP Rating/Location Rating
IP65/Wet
Certification
DLC/ETL/UL8800/CE

Trolmaster
TrolMaster Hydro X LMA-G Group Control Lighting...
$ 95.55
LMA-G is specially designed to be used with ThinkGrow Model-I and I Plus. The LMA-G needs to be connected with a lighting control adaptor to offer a group control function to the grow lights. Each LMA-G can control one group of lights./ Each light group requires one LMA-G.
TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.
Designed for ThinkGrow Single-bar LED fixtures.
LMA-G Technical Sheet Dowload

Trolmaster
TrolMaster Hydro X WD-1 Water Detector +...
$ 77.18
The optional Water Detector WD-2 allows the user to detect water leaks or water on the floor of the facility. Simply place the water sensor at floor level (or wherever you want to watch out for water leaks). Up to 5 Water detectors can be connected to a single Hydro-x controller. If ANY of the sensor detects a water leak, the unit will send a user-alert to notify user of a water leak.

Innoquest
SpotOn Pocket Soil Moisture, EC and Temperature...
$ 495.00
Introducing the SpotOn® Pocket Soil Moisture Meter
We are excited to unveil the SpotOn Pocket Soil Moisture Meter, an innovative device designed for greenhouse growers and potted plant enthusiasts. This advanced tool delivers quick and accurate readings of soil moisture, pore and bulk electrical conductivity (EC), and temperature, ensuring optimal plant health and growth. With seamless Bluetooth connectivity to the SpotView Mobile App (available on Google Play and the Apple Store), monitoring your plants has never been easier.
Why Choose the SpotOn® Pocket Soil Moisture Meter?
Quick & Accurate Readings: This state-of-the-art meter provides precise measurements of soil moisture, pore and bulk EC, and temperature, helping you maintain ideal growing conditions effortlessly.
Versatile Applications: Perfect for both mineral and soilless media, the SpotOn® Pocket Soil Moisture Meter is suitable for a wide range of plants and growing environments, particularly professional greenhouses.
Compact Design: True to its name, this pocket-sized meter is compact and lightweight, making it easy to transport and ideal for taking measurements across multiple locations.
Durable Construction: Featuring 2.75” rubber-mounted sensor rods that resist bending and an ultra-high-frequency (100 MHz) measuring circuit, this meter ensures accurate moisture readings in various soil types and salinity levels.
Bluetooth® Connectivity: Connect seamlessly to the SpotView™ App via Bluetooth® to view real-time data, access past recordings, and share data in .csv format.
Experience the Benefits:
Optimize Water Usage: Get precise readings to help you use water efficiently, ensuring your plants receive just the right amount of moisture.
Enhance Plant Health: Monitor and maintain optimal growing conditions to support healthy, thriving plants.
Increase Yield: Accurate measurements and real-time data allow you to make informed decisions that can enhance your overall yield.
Order Yours Today
Elevate your plant-growing experience with the SpotOn® Pocket Soil Moisture Meter. Order yours today and take the first step toward healthier, more productive plants.
Product Spec Sheet Download
Product Manual Download
Range:
Volumetric Water Content: 0.0 - 100.0% m3/m3Electrical Conductivity: 0.0 - 5.00 mS/cm Bulk (dS/m) Temperature: 16°F(-9°C) - 120°F(49°C)
Accuracy:
Volumetric Water Content: +/- 3% Electrical Conductivity: +/- 0.1 mS/cmTemperature: +/- 1°F(0.6°C)
Repeatability:
Less Than 0.5% variation: VWC, EC, Temp
Environmental:
32 - 122°F (0-50°C) Operating RangeIP-64 Rated (Rain and Dust Proof)
Battery:
(2) AA/LR6 Alkaline Batteries (included)
300 Hrs Continuous On-time Battery Life
Meter Automatically Turns Off After 20 Minutes OfInactivity
Dimensions:
As Shipped: 4.5”(11.4cm)W x 8.5”(11.4cm)D x3.5”(93cm)L 3.3lb(1.5kg)

ThinkGrow
ThinkGrow Model One 90W LED Driver with...
from $ 360.00
The TLD-4, is a modular plug-and-play LED driver that is designed to operate a single 90-watt LED bar. Since the TLD-4 is a modular driver, it can be combined with additional TLD-4 drivers to create a complete lighting system that can fit into any size space, and provide up to 1400 umol of light. It features four spectrum control channels and can be connected to a TrolMaster HCS or TCS controller to allow for remote control and independent settings for each of the four channels. That provides the ability to have customized lighting spectrum and timing control. The TLD-4 works with the 4ft long TLB-1 or 5ft long TLB-2 LED light bars from ThinkGrow.

Forever Green Indoors
FGI Uniformity Pro 640w Full Spectrum LED...
$ 995.00
Product is discontinued
The Uniformity Pro 640 was designed to be the best built, longest lasting 4' x 4' LED on the market today.
Fully water resistant wiring connections, heavy duty all aluminum bars, sealed crystal lens diode covers, in an easy to install folding frame. We use the highest quality and latest Samsung LM301B top bin diodes to create the FGI grow spectrum.
We overbuild our lights intentionally so they will last for years and years in harsh grow environments. AT 37 lbs this unit is best in class for construction. Wet rated means it's okay to receive accidental over-spray.
Suitable for vertical racks, over trays and benches or in 4' x 4' or larger grow tents.
For use with the FGI Dimming Controller for light management and scheduling.
Featuring
• All wiring connections are sealed with IP68 waterproof connections.
• The LED diodes are covered with gorilla glass like crystal lens coverings.
• Bars are heavy duty extruded aluminum.
• 1600 umols/s total PPF output.
• Nearly 1300 umols/ms of usable photosynthetic light output at 9-12".
Learn more about the FGI Uniformity Pro on our YouTube Channel here:
Our LED diode mix creates the ideal grow spectrum for indoor plants. 3200 full spectrum Samsung LM301H neutral white diodes in 4000K CCT. The white diodes are paired with 48 Osram Osolon Hyper Red Square 660nm diodes, from Osram's horticulture optimized LED diode line.
Each light comes with a 10' power cord. It also comes with a 4' connection cable allowing you to control a network of lights with various lighting controllers.
Our FGI Dimming Controller is one example and allows advanced programming including on/off timers, sunrise and sunset programming and automatically dims the light if temperatures in the grow space exceed your programmed limit.
Par Map @ 12"
FGI Spectrum
The Uniformity Pro 640 carries a full five year warranty.
It's 5% larger than the Gavita 1700e and Fluence Spydr 2 series.
Control Recommendation: The FGI Dimming Controller. 0-10V. Touch screen. Sunrise, sunset, auto room temperature controller.
Specifications:
Product Name: FGI HT-02 Uniformity Pro 640Part Number: FGIUP8Rev2UPN: 887437032817Dimensions: W x L x H (inches) 47x47x4
IMPORTANT: The unit does not ship with a standard plug. Please request a free 110/220/270V plug with your purchase if you need one.
DiodesBrand Name: Samsung LM301H top binNumber of pieces: 3200Model/Part number: Neutral WhiteCCT: 4000KCRI: 80
Driver: Inventronics 600W Model: EUD-600S560DT
Other color DiodesBrand Name: Osram OsolonNumber of pieces: 48Model/Part number: Hyper Red
CCT: 660nmRatio mix white/red (%): 3200:48
Lifetime: (L-90 - in hours L90B50 @ 36000HRS
Photosynthetic Light MeasurementsPPF Output*: 1600PPF Efficacy*: 2.5Photopic Light MeasurementsLuminous Flux* 92,000Luminous Flux Efficacy*: 144OtherInput Power: 640wInput Voltage: 120-277Cord length: 10'Plug type (note if bare whip): Not includedPackaging DimensionsDimensions W x L x H (inches): 47x47x4Weight (pounds): 36
Operating Temp range (F): 33-104
IP rating (UL-ETL or estimated final UL-ETL): wetDimming / TuningDimming (Yes/No): YesIndependent channel dimming (Yes/No): NoController type: External 0-10V
Product Warranty:5 years

ThinkGrow
ThinkGrow LED Stand with Adjustable Height for...
$ 34.00
This stand is designed to be used with the ICL-300. It can be used to adjust the height and for placing the ICL-300 within the canopy.

ThinkGrow
ThinkGrow TDC-240 7ft Splitter Power Cord for...
$ 24.00
The TDC-240 splitter power cord with NEMA 6-15 plug is a 7ft split power cord for the new Model-One System or ICL-309 inter canopy LED and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end.
The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. The TDC-240 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

ThinkGrow
ThinkGrow TDC-3 24” Daisy Chain Cord for...
$ 19.00
This Daisy Chain Cord is specially designed for the new Model-One System and ICL-300 inter canopy LED to interconnect between the LED drivers or bars.
Also required is one TDC-1 splitter power/daisy chain cord to start the chain and connect to power.
The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt).
The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

ThinkGrow
ThinkGrow ICL-300 120W LED Grow Light For...
$ 269.00
The ThinkGrow Model One LED System 4ft Inner Canopy LED Bar with built-in 120 Watt Driver, will revolutionize high-density indoor growing. When applying light to plants only from above the plants, leaves and sections of the plant below the top “canopy” of the plant suffer from low light levels. That is the exact problem the ICL-300 is designed to fix. The ICL-300 emits light in a 300 degree pattern so that when positioned below the canopy, the sections of the plant under the canopy can also get the light they need to produce higher quality and yields. By applying some light to the middle of the plant structure, the user can eliminate lower quality flower formation and replace it with healthy flowers. The modular design of the ICL-300 allows them to be used in all installations regardless of the shape or size of the growing area.
When light is only applied from overhead lighting fixtures, it is often the case that the light does not reach the bottom of the canopy, leaving a lot of gains on the table. This is where the ICL-300 steps in and solves the problem.
Equipped with a built-in driver and LED diodes covering 3 sides, the ICL-300 emits light in a 300-degree direction. When placed within the canopy, the lower sections of the plants can absorb light directly from the LED and can receive the much needed light they need to produce higher quality and quantity of yields. Additionally, by applying light to the middle of the plant structure, the user can eliminate lower-quality flower formation and replace it with healthy flowers. The modular design of the ICL-300 allows them to be used in all installations regardless of the shape or size of the growing area.
Optional, not included: The ThinkGrow TSD-1 LED Stand was specifically designed to be used with the ICL-300. With the use of the TSD-1, growers can easily place their ICL-300 lights within the canopy, as well as easily adjust the height of the lights. Additionally, this stand facilitates the task of daisy-chaining multiple ICL-300 grow lights. Two are required for every ICL-300.
Thinkgrow ICL-300 Tech-Sheet Download
Thinkgrow ICL-300 Install Guide Download
Thinkgrow LMA-G tech sheet (required)
Thinkgrow LMA-T tech sheet (required)
Don’t forget to buy: power cord (for the voltage you are using) daisy chain connections (sold in different lengths).
Spec sheet downoad for daisy chain and power cords

ThinkGrow
Thinkgrow TLB-2 5' LED bar with 4x...
$ 101.00
5' LED Bar with 4x Spectrum Channels (White+ Deep Red+ Far Red+ UV) for Model One LED
System, TLB-2, is an advanced 5' LED light bar that features four spectrum channels, including
full spectrum , deep red, far red, and UV. When connected to a TrolMaster controller, the TLB-2
can replicate natural sunlight properties by allowing the user to adjust the actual light spectrum.
This empowers growers to customize the desired light recipe for their plants, taking advantage of
the four separately controllable spectrum channels. Each TLB-1 provides 90 watts of light

ThinkGrow
ThinkGrow TLB-1 4' LED bar with 4x...
$ 91.00
4' LED Bar with 4x Spectrum Channels (White+ Deep Red+ Far Red+ UV) for Model One LED System, TLB-1, is an advanced 4' LED light bar that includes four spectrum channels, including full spectrum , deep red, far red, and UV. When connected to a TrolMaster controller, the TLB-1 can replicate natural sunlight properties by allowing the user to adjust the actual light spectrum. Each TLB-1 provides 90 watts of light , effectively meeting the needs of ALL phases from vegetative to flowering.

ThinkGrow
ThinkGrow FR-1 4' LED bar with 2x...
$ 70.00
4' LED Bar with 2x Spectrum Channels (Full Spectrum + Far Red) for Model One LED System, the FR-1, is a standard 4’ LED light bar that incorporates two spectrum channels, full spectrum and far red. When connected to a TrolMaster controller, it effectively covers essential growth stages from vegetative to flowering. By providing targeted far-red light to the crop at specific times, you can manipulate plant responses, accelerate flowering, and increase overall yield.

ThinkGrow
ThinkGrow DR-1 4' LED bar with 2x...
$ 65.00
4' LED Bar with 2x Spectrum Channels (Full Spectrum + Deep Red) for Model One System , the DR-1, is a standard 4’ LED light bar that features full spectrum and deep red spectrum channels. It can be connected to a TrolMaster controller, allowing growers to select from a range of spectrum recipes for different crops and growth stages. This flexibility can be achieved through the on-board dimming knob or compatible controllers.

ThinkGrow
ThinkGrow Model One 90W LED Driver with...
$ 70.00
The TLD-2, is a modular plug-and-play LED driver that is designed to operate a single 90-watt LED bar. Since the TLD-2 is a modular driver, it can be combined with additional TLD-2 drivers to create a complete lighting system that can fit into any size space, and provide up to 1400 umol of light. It features two spectrum control channels and can be connected to a TrolMaster Hydro-X or Tent-X system controller to allow remote control and independent settings for each of the two channels. That provides the ability to have customized lighting spectrum and timing control. The TLD-2 works with the FR-1, DR-1 or UV-1 LED light bars from ThinkGrow.

ThinkGrow
10' Daisy Chain Extension Power Cord
$ 102.00
The DEA-10/12/14 is a 3' long AWG#10/12/14 Daisy-chain Extension Power Cord for all ThinkGrow LEDs, designed to extend the length of the Daisy-chain power cord, to satisfy a variety of applications. Depending on the power source of your facility, using the daisy-chain power cables can provide power to multiple lighting fixtures.
The DEA-10L is a 10’ Daisy-Chain Extension Power Cord to extend the power cord cable to interconnect between LED drivers to reduce power outlets and infrastructure costs.

ThinkGrow
ThinkGrow DCA-10 Daisy-Chain Power Cord 5' 20A...
$ 90.00
The DCA-10/12/14 is a 5' long AWG#10/12/14 daisy-chain power cord for all ThinkGrow LEDs, designed to interconnect LED drivers, the system can eliminate a massive amount of power outlets, and reduce the number of power cables required. Depending on the power source of your facility, using the daisy-chain power cables can provide power to multiple lighting fixtures.

ThinkGrow
ThinkGrow UH-2 Unit-Strut Hanger for Model-I &...
$ 29.00
The UH-2 Unistrut Hanger is designed for low ceiling installation with standard 1-5/8” Metal Framing Channels (Unistrut). It comes with a quick release design and compatible with Model-I/I Plus fixtures.

ThinkGrow
ThinkGrow UH-1 Unit-Strut Hanger for Modle-H/W/V
$ 29.00
The UH-1 Unistrut Hanger is designed for low ceiling installation with standard 1-5/8” Metal Framing Channels (Unistrut). It comes with a quick release design and compatible with Model-H/W/V fixtures.

ThinkGrow
ThinkGrow RC-1 Lifter Rigging Cable Kit
$ 53.00
The Lifter Rigging Cable Kit (RC-1) is a high-quality rigging cable specifically designed for use with the ThinkGrow Smart Light Lifter System. This cable kit is built to withstand the weight of your grow lights and is capable of lifting up to 120KG when used with other RC-1 cables. With the Lifter Rigging Cable Kit, you can easily adjust the height of your grow lights to optimize the growth of your plants and make maintenance a breeze.

ThinkGrow
ThinkGrow LRC-1 Smart Lifter Remote
$ 136.00
The LRC-1 Smart Lifter Remote is designed to be used with the LLT-1 Smart Light Lifters. Its plug & play feature enables users to easily install and operate the light lifter(s) from a distance, and program the maximum and minimum range limits of LLT-1 light lifters. Simple Up and Down manual operation is accomplished using two push buttons on the LRC-1. The LRC-1 Lifter Remote can also be connected with the TrolMaster Hydro-X Pro controller for advanced features such as lifter-group control and more. When the LRC-1 is paired with the Hydro-X Pro, users can conveniently and smoothly control each individual lifter group or all groups together on one main controller. Each LRC-1 controls a group of lifters. Users can program the height range setting in each group and precisely raise and lower the multiple fixtures in each lifter group with the press of a button.
ThinkGrow LRC-1 Spec Sheet Download

ThinkGrow
ThinkGrow LLT-1 Smart Light Lifter
$ 627.00
The LLT-1 light lifter is part of the ThinkGrow Smart Light Lifter system. Its cutting-edge synchronized multi-lifter operation provides users with a customizable, expandable and easy-to-install system. The light lifter design enables easy, two-man installation. Users can effortlessly adjust the height of the entire grow room’s light fixtures at the perfect height level with the touch of a button. It reduces assembly time and installation manpower without compromising quality or safety.
ThinkGrow LLT-1 Spec Sheet Download

ThinkGrow
ThinkGrow Model-I plus 720W Linear LED Grow...
$ 1,207.50
The ThinkGrow Model I-Plus LED fixture is a high-performance grow light designed specifically for horticulture cultivation. The compact design, featuring a built-in driver, ensures a balance between energy efficiency and an optimal human work environment. The innovative V-shape design on the LED panel enhances light distribution, allowing for a reduced height from the canopy, which in turn minimizes light energy loss.
Benefits of Light Intensity
This LED grow light offers outstanding efficiency with a light intensity of 2.7 µmol/J, ensuring that your plants receive the maximum amount of usable light energy per unit of electricity consumed. High light intensity promotes vigorous plant growth, enhances photosynthesis, and increases yields. This efficiency translates into lower energy costs, making it an economical choice for both commercial and home growers.
Benefits of the Color Spectrum
The fixture features four fully controllable spectrum channels—UV, White, Deep Red, and Far Red—providing the flexibility to dial in the exact light recipe your plants need.
UV (Ultraviolet): UV light stimulates the production of essential oils and resins, enhancing the flavor, aroma, and overall quality of your crops. It also helps in controlling mold and mildew, ensuring healthier plants.
White Light: Mimicking natural sunlight, white light supports all stages of plant growth, from seedling to flowering. It provides a balanced spectrum that enhances overall plant health and growth.
Deep Red: Deep red light is crucial for the flowering and fruiting stages of plant development. It promotes the production of flowers and fruits, leading to higher yields and better-quality produce.
Far Red: Far red light influences plant morphology, encouraging stem elongation and leaf expansion. This spectrum is essential for optimizing canopy penetration, ensuring that light reaches the lower parts of the plants, promoting uniform growth.
With the TrolMaster HCS-2/3 controller, you can fully control these spectrum channels, tailoring the light to the specific needs of your plants at different growth stages. The external control capability allows for the management of up to 256 fixtures per channel, making it a versatile solution for large-scale operations.
In summary, this high-performance LED grow light not only maximizes energy efficiency but also enhances plant growth through its innovative design and spectrum flexibility, ensuring your plants receive the precise light they need for optimal growth and yields.
Spec Sheet Download

ThinkGrow
ThinkGrow Model-I 720W Linear LED Grow Light
$ 903.00
ThinkGrow Model-I LED Grow Light: Optimized for Greenhouse and Indoor Cultivation
The ThinkGrow Model-I is a high-performance LED grow light designed specifically for greenhouse and single-level indoor horticultural cultivation. This fixture integrates cutting-edge features to enhance energy efficiency, light distribution, and overall plant growth.
Key Features and Benefits
Compact and Efficient Design:
Built-in Driver: Ensures energy efficiency while maintaining a balanced work environment for growers.
Innovative V-Shape Design: Improves light distribution, reducing the height needed from the canopy and minimizing light energy loss.
Full Spectrum and UV Light:
Natural Sunlight Mimicry: The full-spectrum design with UV provides a light quality similar to natural sunlight, covering all critical growth phases from vegetative to flowering.
Enhanced Far Red Spectrum:
Far Red Channel. Offers an additional Far Red spectrum channel, allowing a 10-15 minute exposure to accelerate the flowering cycle (External Controller required).
Efficiency:
Outstanding efficiency at 2.54 umol/J, ensuring optimal light utilization.Advanced Control Capabilities:
External Control:
Allows up to 256 fixtures per channel, providing extensive control options for large-scale operations.
Compatibility:
Designed to work seamlessly with TrolMaster Hydro-X control systems.
Independent Channel Control:
Using the TrolMaster lighting adaptor LMA-T, the Full Spectrum and Far Red channels can be independently controlled. This feature enables the Far Red channel to be activated 10-15 minutes after lights-off, expediting the flowering process.
Application and Use
Greenhouse Cultivation: Ideal for use in greenhouses, where efficient light distribution and control are crucial.
Single-Level Indoor Cultivation: Perfect for indoor grow setups, providing a balanced light environment that supports all stages of plant growth.
Conclusion
The ThinkGrow Model-I LED Grow Light is a state-of-the-art solution for professional horticultural cultivation. Its compact, efficient design, combined with advanced light spectrum control and compatibility with TrolMaster systems, makes it an ideal choice for both greenhouse and indoor applications. Achieve optimal plant growth and accelerated flowering with the Model-I’s superior technology and performance.
Spec Sheet Download

ThinkGrow
ThinkGrow Model V LED Grow Light for...
$ 895.25
Model-V LED Grow Light
The Model-V is a high-performance LED grow light engineered for horticultural cultivation. It is specifically designed to support vegetative cultivation practices and is ideal for both commercial cultivators and home hobbyists, particularly those cultivating without CO2 supplementation.
Key Features
Full Spectrum Design:
Provides comprehensive coverage for all critical growth phases, from vegetative to flowering stages.
Independent Far Red Channel:
Features a 730nm Far Red channel to target Phytochrome Far Red.Far Red light introduction post-lights-off can extend the dark period, promoting the flowering process based on scientific research.
Benefits
Optimized Plant Development:
The full spectrum design ensures that plants receive the appropriate light for each growth phase, enhancing overall development and yield.
Enhanced Flowering Process:
The independent Far Red channel supports advanced photomorphogenic lighting applications, crucial for encouraging the flowering process.
Versatility:
Suitable for various cultivation environments, whether for commercial or home use.
Application
Vegetative Cultivation:
Perfect for growers focusing on the vegetative stage, ensuring robust and healthy plant development.
Commercial and Hobbyist Use:
Designed to meet the needs of both large-scale commercial operations and small-scale home cultivation setups.
The Model-V LED Grow Light combines advanced features and versatility to meet the diverse needs of cultivators, ensuring optimal growth and flowering processes.
Spec Sheet Download
Product Manual Download
Specifications
PPF:
900 µmolls
Efficacy:
2.6 µmol/J
Input Power:
350W (Full Spectrum) / 10W (Far Red)
Power Factor:
>=90%
Fixture Dimensions/
45"Lx44.6" Wx4.44" H
Mounting Height:
>= 6" Above Canopy
Lifetime:
> 54,000 hrs
Warranty:
5 Years Standard Warranty
Input Voltage:
Autosensing 100-277 V
Amp Draw:
12 0V /2.63A, 24 0V /1.34A, 277 V /1.2A
Weight
23.62 lbs

ThinkGrow
ThinkGrow Model-W 630W Full Spectrum LED Grow...
$ 1,155.00
The Model-W is a high performance LED grow light for the horticulture cultivation. It is designed for high PPFD cultivation practices. Full spectrum design covers each critical phase of growth from vegetative to flowering. An independent Far Red 730nm channel is designed to target Phytochrome Far Red in photomorphogenic lighting applications. Base on research, introducing far-red light after the lights have been turned off can lengthen the dark period to encourage the flowering process.
The Full spectrum design covers each critical phase of growth from vegetative to flowering. An independent Far Red 730nm channel is designed to target Phytochrome Far Red in photomorphogenic lighting applications.
ThinkGrow Model W Spectrum
On-Board DimmingGroup ControlExternal ControllabilityIP56 WaterproofPlug and PlayOutstanding EfficiencyFull Spectrum Design
ThinkGrow Model W Spec Sheet
ThinkGrow Model W Product Manual
ThinkGrow Model W Product Brochure
Specifications:
PPF:
1600 umols
Efficacy:
2.6 umols/j
Input Power:
Max 630W (Full Spectrum)/ 20W (Far Red)
Power Factor:
>=9%
Fixture Dimensions:
45"L x44.6"W x4.44"H
Mounting Height:
> 6" Above Canopy
Lifetime:
> 55,000 hrs
Warranty:
5 Year Warranty
Input Voltage:
Autosensing 100-277
Amp Draw:L
120V /5.26A, 240V /2.68A, 277V /2.38A
Fixture Weight:
38.8 lbs