-45% sale
FGI Soft Pouch
FGI
FGI Protective Case For Meters & Sensors $ 5.00 $ 9.00
  Brightly Colored, Easy To Spot Neoprene zipper protective pouch to protect your investment.  Ships Blue, Orange or Green depending on availability. 
-5% sale
Trolmaster MBS-S8 Hydro-X CO2 Sensor - Accessory for HCS-1 Controller
Trolmaster
Trolmaster MBS-S8 Hydro-X CO2 Sensor - Accessory for HCS-1 Controller $ 210.90 $ 222.00
 Description The optional CO2 Sensor (MBS-S8) measures the CO2 PPM within the growing area. Using the MBS-S8 allows the users to connect and control their supplemental CO2 system using the Hydro-X. *Used in combination with one or more DSC-1 CO2 device modules.
-10% sale
Trolmaster ARS-1 AC Remote Station
Trolmaster
Trolmaster ARS-1 AC Remote Station $ 94.75 $ 105.00
The ARS-1 mini-split air conditioner controller is a unique product that solves the age-old problem of having separate day and night temperature settings on your mini-split air conditioners. The ARS-1 is a universal controller that works with most mini-split air conditioners (and some window-type AC units too), as long as the unit came with an IR / infrared remote controller. We use the remote control that came with the unit to “teach” those IR signals to the ARS-1 module. Once the ARS-1 “learns” those remote control codes, the ARS-1 will send those same signals to the indoor mini-split head unit changing the setpoint to the desired Day or Night temperature setting automatically base on the photocell sensor status.
-5% sale
Trolmaster MBS-TH Hydro-X Replacement
Trolmaster
Trolmaster MBS-TH Hydro-X Replacement and Backup Temp / Humidity / Light Sensor $ 75.05 $ 79.00
3-in-1 Temp/Humid/Light sensor for the Hydro-X system. Note: This is a replacement or spare part. The main controller comes with a sensor already. Note: This is a replacement or spare part. The main controller comes with a sensor already. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"
-5% sale
Trolmaster MBS-SD Hydro-X Smoke Detector
Trolmaster
Trolmaster MBS-SD Hydro-X Smoke Detector w/RJ12 splitter & 16' cable $ 55.10 $ 58.00
The optional Smoke Detector (MBS-SD) can alert the user to smoke within their growing area at ALL TIMES. Up to 5 smoke detectors can be connected to a single Hydro-x controller. If ANY of the smoke detectors determine there is smoke in the area, the user will receive a user-alert on their phone to alert them to the potential problem BEFORE the problem gets out of hand. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"
-5% sale
TrolMaster WD-2 Water Detector
Trolmaster
TrolMaster WD-2 Water Detector $ 69.83 $ 73.50
The optional Water Detector WD-2  allows the user to detect water leaks or water on the floor of the facility. Simply place the water sensor at floor level (or wherever you want to watch out for water leaks). Up to 5 Water detectors can be connected to a single Hydro-x controller. If ANY of the sensor detects a water leak, the unit will send a user-alert to notify user of a water leak.
Sold out -6% sale
Trolmaster MBS-PAR Quantum Sensor for Hydro-X Pro
Trolmaster
Trolmaster MBS-PAR Hydro-X Full Spectrum Quantum Sensor $ 417.95 $ 442.00
The Full Spectrum Quantum Sensor (MBS-PAR) provides accurate and cost-effective measurement of photosynthetically active radiation (PAR) from all light sources used to grow plants. The full-spectrum quantum sensor has a spectral range of 389 to 692 nm ± 5 nm. The improved spectral response increases the accuracy of LED measurements. 
Sold out -6% sale
Trolmaster MBS-Pro Quantum Sensor for Hydro-X Pro
Trolmaster
Hydro X SuperstoreTrolmaster MBS-PRO Hydro-X Temp/Humid/CO2/Light 4-in-1 Sensor for Hydro-X Pro $ 377.95 $ 399.00
The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) sensor and photocell to create the perfect all-in-one environmental sensor. It is designed for Hydro-X Pro system only.  Assembled using a new water-resistant plastic injected enclosure, the MBS-PRO can be placed in multiple locations throughout the growing area to provide spot measurements from multiple sensors (Up to 50 sensors can be connected to the Hydro-X Pro) The sensors can then be used together (averaged) or separately in order to control a specific section of the grow area by assigning a sensor to a specific control device. The MBS-PRO features a built-in LCD display to show the current conditions of that sensor which provide the ease of onsite monitoring. It also features a new “push-lock” connection to make installation easy.Please Note: The MBS-Pro requires the SPH-1 for supplemental power. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"  

60 DAYS EASY RETURNS

FREE US SHIPPING

FAST CHECKOUT

SAME DAY FULFILLMENT

(Orders before 11am pst)