The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) sensor and photocell to create the perfect all-in-one environmental sensor. It is designed for Hydro-X Pro system only.  Assembled using a new water-resistant plastic injected enclosure, the MBS-PRO can be placed in multiple locations throughout the growing area to provide spot measurements from multiple sensors (Up to 50 sensors can be connected to the Hydro-X Pro) The sensors can then be used together (averaged) or separately in order to control a specific section of the grow area by assigning a sensor to a specific control device. The MBS-PRO features a built-in LCD display to show the current conditions of that sensor which provide the ease of onsite monitoring. It also features a new “push-lock” connection to make installation easy.Please Note: The MBS-Pro requires the SPH-1 for supplemental power. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"  

TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.  Lantern lighting schedule is as follows; 12 hours lights on, 5.5 hours lights off, 1-hour lights on, 5.5 hours lights off, and repeat schedule. The 1 hour on in between off period fools the plants to stay in vegetative growth state.  This LMA-24 lighting adapter is specially designed to use both two channels on the Hydro-X system to create a lantern schedule control for any lights with 0-10V protocol. It is compatible with HIDs like Gavita/Nanolux/Luxx/Growers Choice/Illuminar/PL and LEDs like FGI/Fluence/Next light/Spectrum King * Consult Trolmaster for questions concerning your particular device.

Official authorized TrolMaster Distributor. Items ship same or next day, expedited UPS ground.  TrolMaster revolutionized environmental controller technology when it introduced the Hydro-X. The Hydro-X Pro continues the revolution with a 10’ touch-screen and a web-based software. 10.1' Touchscreen Fully Customizable  Free Smart Phone App plus Web-base control system The Hydro-X Pro is backwards compatible with all current Hydro-X control / device modules. It also provides greater flexibility and allows any plug-in module to be addressed to be whatever the user wants. The user can also set up each plug-in module to have multiple “conditions” that will activate the module, allowing for almost unlimited control options. The Hydro-x Pro is designed to be a single room controller for reliability and ease-of-use. The Hydro-X Pro expands the capability of the original Hydro-X by allowing up to 50 sensors and up to 50 separate control modules to be connected to a single Hydro-X Pro. Multiple sub-zones can be created within the single grow space by linking a specific sensor, to a specific control function(s).The new 4-in-1 sensor comes with a LCD screen which provide the ease of onside monitoring. Customized programming allows almost limitless degree of control. Each of the variables (Temperature, Humidity, CO2, Light) can be controlled independently, meaning a customized ramp-up / ramp-down can be used to closely simulate natural outdoor conditions, or simply allow complete customization of the environment. Displayed on an easy-to-read and construct “graph” it allows the user to have 100% control of their environment. Another powerful feature of the Hydro-X Pro is the built-in calendar and calendar presets that allows the user to schedule an entire crop’s “recipe” within the Hydro-X Pro. All settings including Lighting, Temperature, Humidity, CO2, and Timers can be specified by the user as they “build” their multi-week crop schedules. Reminders can also be programmed to ensure critical tasks are not forgotten. The TrolMaster APP will also allow for notifications with separate day/night limits to be received by the user. The web-based software provides easy access and more advanced remote control. Onboard data acquisition and the ability to store and share setting between multiple devices, means that user-defined programs & settings can be saved and loaded into multiple Hydro-X Pro units with ease. A personalized screensaver page can be uploaded through a USB port. The same upgradeable feature like Hydro-X gives you the ability for life-time improvements. Included: 1x HCS-2 Controller 1x MBS-Pro Sensor 1x Mounting Plate 1x RJ12 Cable Set

ThinkGrow 240V to 120V Plug Adapter for US

The ThinkGrow ECS-9 RJ12 to 4pin connecter cable is simply a 12 ft cable to use with Lighting Control Adapter T (LMA-T) and ThinkGrow LEDs with Threaded Waterproof connecters for interconnecting.

TDC-120 power cord with NEMA 5-15 plug is a 7ft split power cord for the new Model-One System and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers or ICL-300 must be connected to power using one of the TDC-1 cables, or one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-120 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

The TDC-3 Daisy Chain Power Cord is specially designed for the new Model-One or IVL-300 inter-canopy LED System to interconnect between the LED drivers. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.  

the TDC-2 is a 12” daisy chain connector for Model One or ICL-300.  It requires one TDC-1 splitter power cord (to connect to power and the first LED bar or driver). And is specially designed for the new Model-One System and ICL-300 inter-canopy LEDs, and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

The TDC-1 splitter + power cord is specially designed for the new Model-One or ICL-300 System and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

Designed to daisy-chain (interconnect) multiple LEDs to the TrolMaster controller, applicable to all ThinkGrow LEDs including Model-I / Model-I Plus, Model-H, Model-W and Model-V LEDs. Note: This is a replacement or spare part. Every LED fixtures come with a ECS-7 already.

Buy our top selling CTB-6 LED at a significant wholesale discount. Our new FGI CTB-6 F-Type (bloom spectrum) is the best grow light we've ever sold. It outperforms all others in its class. So good we're calling them Uniformity Pro, a long line of top performing LEDs from Forever Green Indoors.  Premium commercial grade LED grow lighting by CABA Tech, experienced grow light electrical engineers here in Washington. Tested extensively in the field by experienced growers. (See installs on the YouTube link below). Built to last with premium quality components. They don't build them like this anymore. Full five year warranty.  We purchased the entire production run and have over 1000 in stock. Exclusively available from Forever Green Indoors.     Product Unboxing Video    Build Quality The CTB-6 660W commercial grow light is constructed to ensure long term performance in any environment.   Heavy duty aluminum enclosure for drivers and controls. Aluminum tube frame that folds open.  Multiple 277 watt solid state drivers power three different LED diode colors. Drivers are digitally programmed to output our patented grow spectrum. Warm white, cool white and red LEDs are tuned perfectly for plant growth indoors. All electrical connections are sealed and epoxied to prevent moisture from affecting the light long term. Diodes are sealed with multiple conformal coatings to protect from VOC's in the grow space.  Photometric tests downloads are below. We're so confident that you'll love this LED that we are extending a 12 month money back guarantee for all units purchased online, here on our site. Volume purchase pricing available. Contact us for a quote. This product comes with a 12 month, no questions asked, money back guarantee.   Control Options Any 0-10V controller. Dims to off. FGI dimming controller - requires wiring harness.  TrolMaster Hydro X Recommended bundle; TrolMaster Hydro X plus LMA-14 Lighting Adapter. Controls up to 60 CTB-6 grow lights. Or add a second LMA-14 on the second channel to control 60 more. All available here on our shopping site (see below).  Highlights 720W Boost Mode Variable dimming knob.  Latest in Lumiled 3535 and Osram long life diodes 1617 PPF @2.58 umols/j (1640 in boost mode) Lifud solid state digital drivers.  Patented grow spectrum controlled by multiple drivers Folds open for easy install Includes rope hangers and heavy duty cable connectors.  110-277 VAC - includes 120V and 240V plug adapters. No special wiring required. Power cord included. PAR MAP at 24" (Best Uniformity) The CTB-6 demonstrates the most uniform light spread of any multibar LED. At 24" the uniformity is perfect over 16sf of canopy. At 18" PAR increases to 1100 umols/ms.  Isoline view demonstrates light uniformity across bands of PPFD (created in AGI32 by Lighting  Analysts) 800-1100 umols/ms     Spectrum This light is offered in two custom spectrum formulas. Full Spectrum and Bloom Spectrum. Bloom spectrum has 24% additional red and far red output.  Spectrum   Our Bloom Spectrum version includes 15% more 600-700nm wavelengths than our Full Spectrum version. This is accomplished by supplying additional power to the independent warm white LED driver, while reducing power to the cool white LED diodes. Our B-Type model produces 5% more PPF output, in the orange, red spectrum range. DLC listed for commercial lighting rebates. We provide rebate program management to maximize your money back. Contact us to learn more.    View More Content On YouTube     Spec Sheet Download  Tear Sheet Download  Photometric Test Reports  (Boost mode, 50% and 100% power) Specifications: DLC Model: CTB6-660W-R1-SH-BS ID: H-CS84WU 5 year warranty.  Diodes: Lumiled & Osram Full Spectrum, Top Bin Long Life  CCT: 3850 CRI: 86 Drivers: Lifud 277W (3 per light) Tuning: Locked in patented light recipe. Bloom and Full Spectrum Versions. Wattage: 660w-720w boost mode output  Voltage: 100-277V AC Autoswitching Plugs: 220-240V Nema Plug. 110-120V Accessory Plugs Included Coverage: 4x4 with CO2. 5x5 No CO2 Dimensions: 47" x 43" x 4"  Hanging Hardware: Rope hangers & Steel V hangers included. Bars: 6 LED bars, conformal coatings.  Cooling: Fanless passive heavy duty design Weight: 37 lbs Controller: Optional   

LMA-G is specially designed to be used with ThinkGrow Model-I and I Plus. The LMA-G needs to be connected with a lighting control adaptor to offer a group control function to the grow lights. Each LMA-G can control one group of lights./ Each light group requires one LMA-G. TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.  Designed for ThinkGrow Single-bar LED fixtures. LMA-G Technical Sheet Dowload

The TLD-4, is a modular plug-and-play LED driver that is designed to operate a single 90-watt LED bar. Since the TLD-4 is a modular driver, it can be combined with additional TLD-4 drivers to create a complete lighting system that can fit into any size space, and provide up to 1400 umol of light. It features four spectrum control channels and can be connected to a TrolMaster HCS or TCS controller to allow for remote control and independent settings for each of the four channels. That provides the ability to have customized lighting spectrum and timing control. The TLD-4 works with the 4ft long TLB-1 or 5ft long TLB-2 LED light bars from ThinkGrow.

Product is discontinued The Uniformity Pro 640 was designed to be the best built, longest lasting 4' x 4' LED on the market today. Fully water resistant wiring connections, heavy duty all aluminum bars, sealed crystal lens diode covers, in an easy to install folding frame. We use the highest quality and latest Samsung LM301B top bin diodes to create the FGI grow spectrum. We overbuild our lights intentionally so they will last for years and years in harsh grow environments. AT 37 lbs this unit is best in class for construction. Wet rated means it's okay to receive accidental over-spray. Suitable for vertical racks, over trays and benches or in 4' x 4' or larger grow tents. For use with the FGI Dimming Controller for light management and scheduling. Featuring  • All wiring connections are sealed with IP68 waterproof connections. • The LED diodes are covered with gorilla glass like crystal lens coverings. • Bars are heavy duty extruded aluminum. • 1600 umols/s total PPF output. • Nearly 1300 umols/ms of usable photosynthetic light output at 9-12".   Learn more about the FGI Uniformity Pro on our YouTube Channel here:  Our LED diode mix creates the ideal grow spectrum for indoor plants. 3200 full spectrum Samsung LM301H neutral white diodes in 4000K CCT. The white diodes are paired with 48 Osram Osolon Hyper Red Square 660nm diodes, from Osram's horticulture optimized LED diode line. Each light comes with a 10' power cord. It also comes with a 4' connection cable allowing you to control a network of lights with various lighting controllers. Our FGI Dimming Controller is one example and allows advanced programming including on/off timers, sunrise and sunset programming and automatically dims the light if temperatures in the grow space exceed your programmed limit. Par Map @ 12"   FGI Spectrum The Uniformity Pro 640 carries a full five year warranty. It's 5% larger than the Gavita 1700e and Fluence Spydr 2 series.  Control Recommendation: The FGI Dimming Controller. 0-10V. Touch screen. Sunrise, sunset, auto room temperature controller.    Specifications: Product Name: FGI HT-02 Uniformity Pro 640Part Number: FGIUP8Rev2UPN: 887437032817Dimensions: W x L x H (inches) 47x47x4 IMPORTANT: The unit does not ship with a standard plug. Please request a free 110/220/270V plug with your purchase if you need one. DiodesBrand Name: Samsung LM301H top binNumber of pieces: 3200Model/Part number: Neutral WhiteCCT: 4000KCRI: 80 Driver: Inventronics 600W Model: EUD-600S560DT Other color DiodesBrand Name: Osram OsolonNumber of pieces: 48Model/Part number: Hyper Red CCT: 660nmRatio mix white/red (%): 3200:48 Lifetime: (L-90 - in hours L90B50 @ 36000HRS Photosynthetic Light MeasurementsPPF Output*: 1600PPF Efficacy*: 2.5Photopic Light MeasurementsLuminous Flux* 92,000Luminous Flux Efficacy*: 144OtherInput Power: 640wInput Voltage: 120-277Cord length: 10'Plug type (note if bare whip): Not includedPackaging DimensionsDimensions W x L x H (inches): 47x47x4Weight (pounds): 36 Operating Temp range (F): 33-104 IP rating (UL-ETL or estimated final UL-ETL): wetDimming / TuningDimming (Yes/No): YesIndependent channel dimming (Yes/No): NoController type: External 0-10V Product Warranty:5 years  

This stand is designed to be used with the ICL-300. It can be used to adjust the height and for placing the ICL-300 within the canopy.

The TDC-240 splitter power cord with NEMA 6-15 plug is a 7ft split power cord for the new Model-One System or ICL-309 inter canopy LED and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. The TDC-240 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

This Daisy Chain Cord is specially designed for the new Model-One System and ICL-300 inter canopy LED to interconnect between the LED drivers or bars.  Also required is one TDC-1 splitter power/daisy chain cord to start the chain and connect to power.  The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.

The ThinkGrow Model One LED System 4ft Inner Canopy LED Bar with built-in 120 Watt Driver, will revolutionize high-density indoor growing. When applying light to plants only from above the plants, leaves and sections of the plant below the top “canopy” of the plant suffer from low light levels. That is the exact problem the ICL-300 is designed to fix. The ICL-300 emits light in a 300 degree pattern so that when positioned below the canopy, the sections of the plant under the canopy can also get the light they need to produce higher quality and yields. By applying some light to the middle of the plant structure, the user can eliminate lower quality flower formation and replace it with healthy flowers. The modular design of the ICL-300 allows them to be used in all installations regardless of the shape or size of the growing area. When light is only applied from overhead lighting fixtures, it is often the case that the light does not reach the bottom of the canopy, leaving a lot of gains on the table. This is where the ICL-300 steps in and solves the problem. Equipped with a built-in driver and LED diodes covering 3 sides, the ICL-300 emits light in a 300-degree direction. When placed within the canopy, the lower sections of the plants can absorb light directly from the LED and can receive the much needed light they need to produce higher quality and quantity of yields. Additionally, by applying light to the middle of the plant structure, the user can eliminate lower-quality flower formation and replace it with healthy flowers. The modular design of the ICL-300 allows them to be used in all installations regardless of the shape or size of the growing area. The ThinkGrow LED Stand was specifically designed to be used with the ICL-300. With the use of the TSD-1, growers can easily place their ICL-300 lights within the canopy, as well as easily adjust the height of the lights. Additionally, this stand facilitates the task of daisy-chaining multiple ICL-300 grow lights. Thinkgrow ICL-300 Tech-Sheet Download Thinkgrow ICL-300 Install Guide Download Thinkgrow LMA-G tech sheet (required) Thinkgrow LMA-T tech sheet (required) Don’t forget to buy: power cord (for the voltage you are using) daisy chain connections (sold in different lengths).  

5' LED Bar with 4x Spectrum Channels (White+ Deep Red+ Far Red+ UV) for Model One LED System, TLB-2, is an advanced 5' LED light bar that features four spectrum channels, including full spectrum , deep red, far red, and UV. When connected to a TrolMaster controller, the TLB-2 can replicate natural sunlight properties by allowing the user to adjust the actual light spectrum. This empowers growers to customize the desired light recipe for their plants, taking advantage of the four separately controllable spectrum channels. Each TLB-1 provides 90 watts of light

4' LED Bar with 4x Spectrum Channels (White+ Deep Red+ Far Red+ UV) for Model One LED System, TLB-1, is an advanced 4' LED light bar that includes four spectrum channels, including full spectrum , deep red, far red, and UV. When connected to a TrolMaster controller, the TLB-1 can replicate natural sunlight properties by allowing the user to adjust the actual light spectrum. Each TLB-1 provides 90 watts of light , effectively meeting the needs of ALL phases from vegetative to flowering.

4' LED Bar with 2x Spectrum Channels (Full Spectrum + Far Red) for Model One LED System, the FR-1, is a standard 4’ LED light bar that incorporates two spectrum channels, full spectrum and far red. When connected to a TrolMaster controller, it effectively covers essential growth stages from vegetative to flowering. By providing targeted far-red light to the crop at specific times, you can manipulate plant responses, accelerate flowering, and increase overall yield.

4' LED Bar with 2x Spectrum Channels (Full Spectrum + Deep Red) for Model One System , the DR-1, is a standard 4’ LED light bar that features full spectrum and deep red spectrum channels. It can be connected to a TrolMaster controller, allowing growers to select from a range of spectrum recipes for different crops and growth stages. This flexibility can be achieved through the on-board dimming knob or compatible controllers.

The TLD-2, is a modular plug-and-play LED driver that is designed to operate a single 90-watt LED bar. Since the TLD-2 is a modular driver, it can be combined with additional TLD-2 drivers to create a complete lighting system that can fit into any size space, and provide up to 1400 umol of light. It features two spectrum control channels and can be connected to a TrolMaster Hydro-X or Tent-X system controller to allow remote control and independent settings for each of the two channels. That provides the ability to have customized lighting spectrum and timing control. The TLD-2 works with the FR-1, DR-1 or UV-1 LED light bars from ThinkGrow.

The DEA-10/12/14 is a 3' long AWG#10/12/14 Daisy-chain Extension Power Cord for all ThinkGrow LEDs, designed to extend the length of the Daisy-chain power cord, to satisfy a variety of applications. Depending on the power source of your facility, using the daisy-chain power cables can provide power to multiple lighting fixtures. The DEA-10L is a 10’ Daisy-Chain Extension Power Cord to extend the power cord cable to interconnect between LED drivers to reduce power outlets and infrastructure costs.

The DCA-10/12/14 is a 5' long AWG#10/12/14 daisy-chain power cord for all ThinkGrow LEDs, designed to interconnect LED drivers, the system can eliminate a massive amount of power outlets, and reduce the number of power cables required. Depending on the power source of your facility, using the daisy-chain power cables can provide power to multiple lighting fixtures.

The UH-2 Unistrut Hanger is designed for low ceiling installation with standard 1-5/8” Metal Framing Channels (Unistrut). It comes with a quick release design and compatible with Model-I/I Plus fixtures.

The UH-1 Unistrut Hanger is designed for low ceiling installation with standard 1-5/8” Metal Framing Channels (Unistrut). It comes with a quick release design and compatible with Model-H/W/V fixtures.

The Lifter Rigging Cable Kit (RC-1) is a high-quality rigging cable specifically designed for use with the ThinkGrow Smart Light Lifter System. This cable kit is built to withstand the weight of your grow lights and is capable of lifting up to 120KG when used with other RC-1 cables. With the Lifter Rigging Cable Kit, you can easily adjust the height of your grow lights to optimize the growth of your plants and make maintenance a breeze.

The LRC-1 Smart Lifter Remote is designed to be used with the LLT-1 Smart Light Lifters. Its plug & play feature enables users to easily install and operate the light lifter(s) from a distance, and program the maximum and minimum range limits of LLT-1 light lifters. Simple Up and Down manual operation is accomplished using two push buttons on the LRC-1. The LRC-1 Lifter Remote can also be connected with the TrolMaster Hydro-X Pro controller for advanced features such as lifter-group control and more. When the LRC-1 is paired with the Hydro-X Pro, users can conveniently and smoothly control each individual lifter group or all groups together on one main controller. Each LRC-1 controls a group of lifters. Users can program the height range setting in each group and precisely raise and lower the multiple fixtures in each lifter group with the press of a button. ThinkGrow LRC-1 Spec Sheet Download

The LLT-1 light lifter is part of the ThinkGrow Smart Light Lifter system. Its cutting-edge synchronized multi-lifter operation provides users with a customizable, expandable and easy-to-install system. The light lifter design enables easy, two-man installation. Users can effortlessly adjust the height of the entire grow room’s light fixtures at the perfect height level with the touch of a button. It reduces assembly time and installation manpower without compromising quality or safety. ThinkGrow LLT-1 Spec Sheet Download

The ThinkGrow Model I-Plus LED fixture is a high-performance grow light designed specifically for horticulture cultivation. The compact design, featuring a built-in driver, ensures a balance between energy efficiency and an optimal human work environment. The innovative V-shape design on the LED panel enhances light distribution, allowing for a reduced height from the canopy, which in turn minimizes light energy loss. Benefits of Light Intensity This LED grow light offers outstanding efficiency with a light intensity of 2.7 µmol/J, ensuring that your plants receive the maximum amount of usable light energy per unit of electricity consumed. High light intensity promotes vigorous plant growth, enhances photosynthesis, and increases yields. This efficiency translates into lower energy costs, making it an economical choice for both commercial and home growers. Benefits of the Color Spectrum The fixture features four fully controllable spectrum channels—UV, White, Deep Red, and Far Red—providing the flexibility to dial in the exact light recipe your plants need. UV (Ultraviolet): UV light stimulates the production of essential oils and resins, enhancing the flavor, aroma, and overall quality of your crops. It also helps in controlling mold and mildew, ensuring healthier plants. White Light: Mimicking natural sunlight, white light supports all stages of plant growth, from seedling to flowering. It provides a balanced spectrum that enhances overall plant health and growth. Deep Red: Deep red light is crucial for the flowering and fruiting stages of plant development. It promotes the production of flowers and fruits, leading to higher yields and better-quality produce. Far Red: Far red light influences plant morphology, encouraging stem elongation and leaf expansion. This spectrum is essential for optimizing canopy penetration, ensuring that light reaches the lower parts of the plants, promoting uniform growth. With the TrolMaster HCS-2/3 controller, you can fully control these spectrum channels, tailoring the light to the specific needs of your plants at different growth stages. The external control capability allows for the management of up to 256 fixtures per channel, making it a versatile solution for large-scale operations. In summary, this high-performance LED grow light not only maximizes energy efficiency but also enhances plant growth through its innovative design and spectrum flexibility, ensuring your plants receive the precise light they need for optimal growth and yields. Spec Sheet Download

ThinkGrow Model-I LED Grow Light: Optimized for Greenhouse and Indoor Cultivation The ThinkGrow Model-I is a high-performance LED grow light designed specifically for greenhouse and single-level indoor horticultural cultivation. This fixture integrates cutting-edge features to enhance energy efficiency, light distribution, and overall plant growth. Key Features and Benefits Compact and Efficient Design: Built-in Driver: Ensures energy efficiency while maintaining a balanced work environment for growers. Innovative V-Shape Design: Improves light distribution, reducing the height needed from the canopy and minimizing light energy loss. Full Spectrum and UV Light: Natural Sunlight Mimicry: The full-spectrum design with UV provides a light quality similar to natural sunlight, covering all critical growth phases from vegetative to flowering. Enhanced Far Red Spectrum: Far Red Channel. Offers an additional Far Red spectrum channel, allowing a 10-15 minute exposure to accelerate the flowering cycle (External Controller required). Efficiency: Outstanding efficiency at 2.54 umol/J, ensuring optimal light utilization.Advanced Control Capabilities: External Control: Allows up to 256 fixtures per channel, providing extensive control options for large-scale operations. Compatibility: Designed to work seamlessly with TrolMaster Hydro-X control systems. Independent Channel Control: Using the TrolMaster lighting adaptor LMA-T, the Full Spectrum and Far Red channels can be independently controlled. This feature enables the Far Red channel to be activated 10-15 minutes after lights-off, expediting the flowering process. Application and Use Greenhouse Cultivation: Ideal for use in greenhouses, where efficient light distribution and control are crucial. Single-Level Indoor Cultivation: Perfect for indoor grow setups, providing a balanced light environment that supports all stages of plant growth. Conclusion The ThinkGrow Model-I LED Grow Light is a state-of-the-art solution for professional horticultural cultivation. Its compact, efficient design, combined with advanced light spectrum control and compatibility with TrolMaster systems, makes it an ideal choice for both greenhouse and indoor applications. Achieve optimal plant growth and accelerated flowering with the Model-I’s superior technology and performance. Spec Sheet Download

Model-V LED Grow Light The Model-V is a high-performance LED grow light engineered for horticultural cultivation. It is specifically designed to support vegetative cultivation practices and is ideal for both commercial cultivators and home hobbyists, particularly those cultivating without CO2 supplementation. Key Features Full Spectrum Design: Provides comprehensive coverage for all critical growth phases, from vegetative to flowering stages. Independent Far Red Channel: Features a 730nm Far Red channel to target Phytochrome Far Red.Far Red light introduction post-lights-off can extend the dark period, promoting the flowering process based on scientific research. Benefits Optimized Plant Development: The full spectrum design ensures that plants receive the appropriate light for each growth phase, enhancing overall development and yield. Enhanced Flowering Process:  The independent Far Red channel supports advanced photomorphogenic lighting applications, crucial for encouraging the flowering process. Versatility:  Suitable for various cultivation environments, whether for commercial or home use. Application Vegetative Cultivation: Perfect for growers focusing on the vegetative stage, ensuring robust and healthy plant development. Commercial and Hobbyist Use:  Designed to meet the needs of both large-scale commercial operations and small-scale home cultivation setups. The Model-V LED Grow Light combines advanced features and versatility to meet the diverse needs of cultivators, ensuring optimal growth and flowering processes. Spec Sheet Download Product Manual Download Specifications PPF:  900 µmolls Efficacy:  2.6 µmol/J Input Power:  350W (Full Spectrum) / 10W (Far Red) Power Factor:  >=90% Fixture Dimensions/ 45"Lx44.6" Wx4.44" H  Mounting Height:  >= 6"  Above Canopy Lifetime:  > 54,000 hrs Warranty:  5 Years Standard Warranty Input Voltage:  Autosensing 100-277 V  Amp Draw:  12 0V /2.63A, 24 0V /1.34A, 277 V /1.2A Weight 23.62 lbs