Controller
-5% sale
Hydro-X DSC-1 CO2 Device Station CO2 Control Relay
Trolmaster
Trolmaster DSC-1 CO2 Device Station CO2 Control Relay Single Pack with cable set $ 74.34 $ 78.00
The TrolMaster DSC-1 CO2 control / device module allows user the to easily connect and control standard supplemental CO2 devices or CO2 exhaust controls to the Hydro-x. Any CO2 device that is 10-amps @ 120 volts or less can be controlled by the DSC-1.
-5% sale
Trolmaster MBS-S8 Hydro-X CO2 Sensor - Accessory for HCS-1 Controller
Trolmaster
Trolmaster MBS-S8 Hydro-X CO2 Sensor - Accessory for HCS-1 Controller $ 253.08 $ 266.40
 Description The optional CO2 Sensor (MBS-S8) measures the CO2 PPM within the growing area. Using the MBS-S8 allows the users to connect and control their supplemental CO2 system using the Hydro-X. *Used in combination with one or more DSC-1 CO2 device modules.
-13% sale
Trolmaster DSP-1  Program Device Station Timer
Trolmaster
Trolmaster DSP-1 Program Device Station Timer $ 73.80 $ 84.00
The TrolMaster DSP-1 program device module (timer module) works like a multi-function timer. The DSP-1 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x.  Any device that is 10-amps at 120 volts or less can be controlled by the DSP-1.
Sold out -5% sale
Trolmaster SPH-1 RJ12 Splitter Hub
Trolmaster
Trolmaster SPH-1 RJ12 Splitter Hub $ 37.62 $ 39.60
  LED indicator Plug & Play he SPH-1 Splitter Hub from TrolMaster makes installation of our controllers as easy as plugging in a phone cable. The SPH-1 hub uses a single RJ12 cable input jack, and provides (8) individual RJ12 output jacks that can be connected to various TrolMaster sensors, adapters and device modules. Using the SPH-1 allows for a "clean" installation and eliminates the need for daisy-chain Y-splitters to be used to interconnect multiple modules or sensors. The SPH-1 is also a powered hub, meaning that it will boost the signals passing through the SPH-1 allowing more modules, sensors and light adapters to be connected to the TrolMaster controllers. By using the SPH-1, an almost unlimited number of LED / HID lights can be controlled using a single TrolMaster controller. The SPH-1 comes complete with the SPH-1 hub, a 16 foot RJ12 cable and the 12vdc power supply. The SPH-1 can be located in a central location with a single RJ12 cable connecting it to the main controller. From the SPH-1 hub, the individual RJ12 jacks can be connected to each of the sensors, device modules, or lighting adapters. Included In Package: 1x RJ12 Splitter Hub 1x 12V Power Adapter 1x 4 ft RJ12 Cable Specifications: Input Voltage: 12VDC Maximum Current: 1A Working Environment: Temperature 32-122°F, Humidity≤90% Packaging Dimensions: 160mm(L) x 85mm(W) x 90mm(H)
-5% sale
Trolmaster ECS-1 RJ12 Extension Cable Set
Trolmaster
Trolmaster ECS-1 RJ12 Extension Cable Set $ 22.80 $ 24.00
  TrolMaster modules and sensors all come complete with a RJ12 16ft cable, Y-splitter and RJ12 4 ft cable to connect to the Hydro-x. When connecting modules that are farther apart, you can use the Extension cable set ECS-1. The ECS-1 comes complete with another 16ft cable, Y-splitter and 4 ft cable. Package Includes:  1 x Male-to-Male 16ft RJ12 Cable 1 x Male-to-Male 4ft RJ12 Cable 1 x RJ12 T-Splitter  
-13% sale
Trolmaster Hydro-X ECS-2 Lighting Adapter RJ12 to 3.5 Jack 0-10V LED
Trolmaster
Trolmaster Hydro-X ECS-2 Lighting Adapter RJ12 to 3.5 Jack Universal Convertor Cable Set For 0-10... $ 30.30 $ 34.80
  Overview  The ECS-2 cable set is designed to connect Hydro-X to most LED drivers with bare wire +/-  wiring. For connecting to a Hydro X HCS-1 or 2. Use with FGI Uniformity Pro 640 & Uniformity Pro Flex (when not using the WiFi controller), FGI Lightpanel 500 (requires a Cat6 adapter plug). Most LED drivers have a pair of + and - wires which control dimming functions. This adapter set provides a simple screw down wiring terminal with a 3.5mm jack connector and RJ-12 extension wiring allowing simple connection from your LED to the Hydro-X controller.  The ECS-2 comes with a 16 ft RJ12 cable, a Y-splitter and a special 4 ft RJ12 / 3.5mm jack cable. The special cable connects to your lighting fixture / LED driver using the two-screw terminal block to connect to loose wires on the LED driver. Simply connect the two wires from your LED driver to the terminal block, each of the lights being controlled are wired in a “daisy-chain” configuration back to the Hydro-X LMA adapter. ~specifications~ 1 x 16 ft RJ12 Cable 1 x 4 ft RJ12 to 3.5 Jack Cable 1 x T-shaped Splitter 1 x 3.5mm Female Barrel Connector  
-5% sale
Trolmaster ECS-5 RJ12 to M16 Connector For Fluence LEDs
Trolmaster
Trolmaster ECS-5 RJ12 to M16 Connector For Fluence LEDs $ 26.22 $ 27.60
The ECS-5 provides a 5/8” diameter connector for some of Fluence brands newer LED fixtures using PushLock Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-5 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / PushLock Waterproof Connector cable.
-5% sale
Trolmaster DCC-1 Dual Condition Adaptor for Hydro-X system
Trolmaster
Trolmaster DCC-1 Dual Condition Adaptor for Hydro-X system $ 79.80 $ 84.00
The TrolMaster DCC-1 provides a simple solution to control a single device, with more than one condition. For example, people like to turn on their exhaust fans when either temp or humidity is too high; shut off CO2 when turn on exhaust fans. There are many other examples where two conditions can be either combined or split. The DCC-1 is designed to be used in combination with one of TrolMaster’s plug-in style module. (DSC-1, DSH-1/2, DST-1/2 and DSP-1). Once connected to the plug-in module using the RJ12 cable built-into the DCC-1, the DCC-1 will act in concert with that plug-in module to control whatever device is connected to the plug-in module. The DCC-1 can also be set to work in two distinct ways using the “Interlock” function.INTERLOCK OFF: When the DCC-1 interlock is set to be off, EITHER condition that are associated with that pair of modules that are being used together can be activated individually for the device to be activated. (modules used in “parallel”)Examples from above for interlock OFF would be: Turn on an exhaust fan to reduce temp or humidity.Turn on an exhaust fan at night using a recycling timer OR when Humidity is too highINTERLOCK ON: When the DCC-1 Interlock is selected to be on, BOTH conditions that are associated with that pair of modules that are being used together must be activated TOGETHER in order for the device to be activated. (modules used in “series”)Examples from above for interlock ON would be: Shut off a CO2 device when an exhaust fan is runningShut off lights if the temperature gets too warm within the area.
-5% sale
Trolmaster MBS-TH Hydro-X Replacement
Trolmaster
Trolmaster MBS-TH Hydro-X Replacement and Backup Temp / Humidity / Light Sensor $ 90.06 $ 94.80
3-in-1 Temp/Humid/Light sensor for the Hydro-X system. Note: This is a replacement or spare part. The main controller comes with a sensor already. Note: This is a replacement or spare part. The main controller comes with a sensor already. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"
-5% sale
Trolmaster MBS-SD Hydro-X Smoke Detector
Trolmaster
Trolmaster MBS-SD Hydro-X Smoke Detector w/RJ12 splitter & 16' cable $ 66.12 $ 69.60
The optional Smoke Detector (MBS-SD) can alert the user to smoke within their growing area at ALL TIMES. Up to 5 smoke detectors can be connected to a single Hydro-x controller. If ANY of the smoke detectors determine there is smoke in the area, the user will receive a user-alert on their phone to alert them to the potential problem BEFORE the problem gets out of hand. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"
-10% sale
Trolmaster DSV-1 Low Voltage Control Station
Trolmaster
Trolmaster DSV-1 Low Voltage Control Station $ 85.50 $ 94.80
The Trolmaster DSV-1 is a low-voltage output module that can be used on the HCS-1, HCS-2 controllers. The DSV-1 can be addressed to be used as a temperature, humidity, CO2, or timer device module.Multiple voltage outputs are selectable by the user. The DSV-1 can output either 12 or 24 VDC up to .5 amps, or 12 or 24 VAC up to 4.8VA. Once the module is configured it will activate the low-volt device wired to the DSV-1.This allows the user to directly connect low voltage devices such as solenoids, valves, audio visual alarms or any other device that requires 12 to 24 volt AC or DC power to operate.
-5% sale
Trolmaster  4RS-1 4 Outlet Expander Station
Trolmaster
Trolmaster 4RS-1 4 Outlet Expander Station $ 165.30 $ 174.00
The 4RS-1 is a universal 4-outlet power expansion module. It can be used with any of TrolMaster’s “plug-in” style device modules to expand the number of devices that can be controlled by the Hydro-x. A single 120-240 volt “trigger” cable on the 4RS-1 connects to your device / control module. When the device module is activated by the Hydro-x, the 4RS-1 trigger cable will turn on each of the 4 receptacles on the 4RS-1 with a 3 second time delay between each outlet being activated. That minimizes high start-up (inrush current) and allows up to 4 devices to be safely controlled. The 4RS-1 must be installed with a 120/240 volt power circuit (up to 50-amps @ 240vac). Three wire terminals inside the unit accept up to #6 AWG wire making connections to the power source easy.
-5% sale
Trolmaster DSD-1 Dry Contact Station Single Pack
Trolmaster
Trolmaster DSD-1 Dry Contact Station Single Pack with cable set $ 79.80 $ 84.00
LCD Display, Easy Operation Seamless Connection with Hydro-X Multiple purposes assignment Plug & Play The Trolmaster DSD-1 Dry-contact module provides a simple and flexible solution to who want to connect & control devices to the Hydro-X using a “dry-contact” or relay to activate the device. Some equipment requires either normally open or normally closed contact closure in order to activate the equipment. The DSD-1 is the product that you need to control those types of devices.* The DSD-1 can be configured to work as the other Trolmaster power modules work. The DSD-1 connects into the “devices” line on the Hydro-X and can be set to control an almost infinite number and types of devices such as:Lighting contactorsLight Deprivation curtainsPump contactorsTemperature devicesHumidity devicesCO2 devices* Consult FGI or Trolmaster for questions concerning your particular device. Package Includes: 1 x Dry Contact Station DSD-11 x 16ft RJ12 Cable1 x 4ft RJ12 Cable1 x RJ12 T-Splitter Specifications: Input Voltage: 100~240VAC, 50/60HzOutput Current: 10AOutput Voltage: 100~240VAC, 50/60HzWorking Environment: Temperature 32-122°F, Humidity=90%Packaging Dimensions: 85mm x 80mm x 90mm
3% sale
Trolmaster DSP-2 240V Program Device Station
Trolmaster
Trolmaster DSP-2 240V Program Device Station $ 107.58 $ 104.40
The TrolMaster DSP-2 program device module (timer module) works like a multi-function timer. The DSP-2 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x. Any device that is 10-amps at 240 volts or less can be controlled by the DSP-2.
-1% sale
TrolMaster Hydro X Plus HCS-3 Grow Room Controller
Trolmaster
TrolMaster Hydro X Plus HCS-3 Grow Room Controller $ 1,434.00 $ 1,438.80
The Hydro X Plus / HCS-3 system is a professional-grade single-zone environmental control system that can control your entire grow space. It has an 800x480 7” LED display monitor and can control an unlimited number of lights, 8 temperature devices, 8 humidity devices, 4 CO2 devices, and 12 programmable timer devices (up to 50 schedules can be created). With incredible flexibility and the expanded product capacity, anyone can now easily customize their own grow room control system for maximum yields. Having multiple control modules also provides the option for the user to create multiple "stages" of growth. By staggering the start times of each stage, the user can minimize the amount of time that plants spend in vegetative growth and focus on the flowering phase. Having multiple control modules also provides the option for the user to create multiple "stages" of temperature and humidity control, which will provide a more stable environment. The HCS-3 system comes with an MBS-PRO 4-in-1 sensor to measure temperature, humidity, CO2 ppm, and the presence of light. Lighting control has never been easier or more capable. The optional MBS-PAR light sensor can be added to the system. It will automatically adjust light intensity to precisely provide the exact amount of illumination for optimum plant growth. The Hydro-X Plus has been can also track your DLI levels. Having 2 separate lighting control channels allows the user to create multiple lighting layouts (and dimming sequences) based on their individual preferences. Besides controlling your room, if a problem is detected by the HCS-3, a warning message (notification) will be sent to your smartphone. Up to 10 smoke detectors and 10 water leak-detectors can be connected to the HCS-3 which will alert you if there are any fire or water leaks. The HCS-3 also offers multiple advanced functions to control your entire grow room or greenhouse such as Sunrise / Sunset simulation, DLI control, overheat protection, Spectrum & Group lighting control, and more.  
-5% sale
TrolMaster WD-2 Water Detector
Trolmaster
TrolMaster WD-2 Water Detector $ 83.80 $ 88.20
The optional Water Detector WD-2  allows the user to detect water leaks or water on the floor of the facility. Simply place the water sensor at floor level (or wherever you want to watch out for water leaks). Up to 5 Water detectors can be connected to a single Hydro-x controller. If ANY of the sensor detects a water leak, the unit will send a user-alert to notify user of a water leak.
Sold out -6% sale
Trolmaster MBS-PAR Quantum Sensor for Hydro-X Pro
Trolmaster
Trolmaster MBS-PAR Hydro-X Full Spectrum Quantum Sensor $ 501.54 $ 530.40
The Full Spectrum Quantum Sensor (MBS-PAR) provides accurate and cost-effective measurement of photosynthetically active radiation (PAR) from all light sources used to grow plants. The full-spectrum quantum sensor has a spectral range of 389 to 692 nm ± 5 nm. The improved spectral response increases the accuracy of LED measurements. 
-8% sale
Trolmaster ECS-6 16ft 4 Pin Waterproof Extension Cable
Trolmaster
Trolmaster ECS-6 16ft 4 Pin Waterproof Extension Cable $ 23.42 $ 25.20
The ECS-6 extension cable is simply a 16 ft extension cable to use with the WCS-1 moisture contet sensor. It has a male and female end and can extend the distance between WCS-1 module and the sensor probe.
Sold out -6% sale
Trolmaster MBS-Pro Quantum Sensor for Hydro-X Pro
Trolmaster
Hydro X SuperstoreTrolmaster MBS-PRO Hydro-X Temp/Humid/CO2/Light 4-in-1 Sensor for Hydro-X Pro $ 453.54 $ 478.80
The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) sensor and photocell to create the perfect all-in-one environmental sensor. It is designed for Hydro-X Pro system only.  Assembled using a new water-resistant plastic injected enclosure, the MBS-PRO can be placed in multiple locations throughout the growing area to provide spot measurements from multiple sensors (Up to 50 sensors can be connected to the Hydro-X Pro) The sensors can then be used together (averaged) or separately in order to control a specific section of the grow area by assigning a sensor to a specific control device. The MBS-PRO features a built-in LCD display to show the current conditions of that sensor which provide the ease of onsite monitoring. It also features a new “push-lock” connection to make installation easy.Please Note: The MBS-Pro requires the SPH-1 for supplemental power. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"  

60 DAYS EASY RETURNS

FREE US SHIPPING

FAST CHECKOUT

SAME DAY FULFILLMENT

(Orders before 11am pst)