-19% sale
0-10V LED Grow Light Controller FGI Dimming Controller V2
FGI
Commercial 0-10v Lighting Dimmer Controller With On/Off Sunrise/Sunset and Auto Temp Control - Un... $ 294.00 $ 359.40
The FGI Dimming Controller provides control over one or many LEDs or 0-10V capeable ballasts. Designed to operate lighting over distances up to 100 feet, the FGI Dimming Controller features robust controls to manage your grow room environment. Connect the controller to an entire room and build sunrise, sunset scenarios to gently wake your plants and put them to bed as nature does in the wild. Or manage rooms and connect several Dimming Controllers to manage strain specific rows or vertical racks of LEDs. Automatically assists in room temperature control by dimming down lights if the temperature setting shows the room is too hot. Adjusts light levels back up when the room is within the setting you choose. Set on and off timers and program sunrise and sunset dimming to mimic natural sunlight and get the most out of your plants.  For use with: FGI Uniformity Pro series  FGI Lightpanel 500/700  All 0-10V dimmable LEDs (see your driver specifications) All 0-10V controllable lighting (may require custom wiring - or TrolMaster ECS cable kits which can be used universally.) Control one or many lights.  Programmable Sunrise and Sunset Mode. System over temperature protection built in to protect your plants from accidental overheating in your grow space programming auto-dimming to reduce heat output. Attractive and easy to use touchscreen programming. 110V powered with battery backup. This unit is powerful enough to connect properly daisy chained units up to 30 meters from the control module.   Q&A: Is this Controller an On/Off switch? Not with the V1 version however yes with our new V2 version which will dim the Uniformity Pro 320 and Uniformity Pro 640 to off. This controller can be used with LED drivers which have the ability to dim to zero to turn your light off. It will not eliminate power to the light. It will however turn off the diodes if your driver has dim to zero capability.   Can the FGI Dimming Controller operate non-FGI LEDs? Yes, it can operate any LED that has a driver (power supply) that allows zero to ten volt dimming (0-10V). Consult the specifications of your LED light, or the specifications of the driver/power supply in the light itself. Most drivers have labels affixed to them that indicate their ability to do 0-10V dimming. How can I tell if my driver is 0-10V? 1. Look at the specifications for the model number of the driver, usually printed on a label on the driver. 2. Look for an indication on the label that the driver is 0-10V dimmable. 3. Look for a pair of wires on the driver/power supply that are NOT used to provide power to the light. Typically these are blue/black but can be a variety of colors based on the manufacturer. Can I connect the FGI Dimming Controller directly to the line voltage power on the light? No. Do not connect the Controller directly to line voltage power in your LED. It will damage the controller and void the return. Can this controller turn my LED totally off? Yes for the FGI Uniformity Pro series LEDs. No, it cannot dim the FGI Lightpanel or Lightbar products to off. For non FGI LEDs it depends on the driver/power supply. Consult the specifications for your driver. If the driver has the ability to "Dim To Off", then it is likely but not 100% that our Controller can dim your lights to off. Otherwise they will dim to 10% of the total light output only. Can I connect many lights to one controller? And if so how many? This depends on the distance you are trying to connect your lights over and the quality of the wire you use. We recommend insulated AWG 14 2 lead wire sold here on Amazon. And we also recommend you use IP68 twist connectors also sold here on Amazon to create a water proof, dust proof daisy chain. 3 way IP68 T connectors are ideal for this application. Product Manual Download Warranty: 24 months for manufacturing defects. 
-25% sale
FGI 360-400NM UV-A Supplemental LED Grow Light
FGI
FGI 360-400NM UV-A Supplemental LED Grow Light $ 149.94 $ 198.00
  DESCRIPTION The FGI 385nm UV Lightbar is designed to provide targeted supplemental blue energy to equal natural sunlight levels. At Forever Green, we strive to match natural sunlight with our lighting products. The reason for this is that plant morphology is affected by the spectral composition of light, which means that different wavelengths of light can promote different plant growth. In particular, blue light is known to encourage compact growth and strong stems, making it an essential part of plant development. By providing plants with the same level of blue light as they would receive from the sun, the FGI 385nm UV Lightbar ensures that they can grow and develop in the best possible way. As a result, it is an invaluable tool for any gardener or plant lover who wants their plants to thrive. Science behind using UV-A supplimental energy on plants Recent studies at Utah State University by Dr. Bruce Bugbee have shown that plants absorb and benefit from light between 380-740NM. This research has led to the study of E-PAR or extended PAR and is redefining measurement of photosynthetic light.  Below are the spectrum charts which compare natural sunlight to full spectrum LEDs and then to full spectrum plus supplemental UV.  The result is a closer match to sunlight providing more of the beneficial blue light that plants benefit from.  Sunlight Levels of 380NM UV Natural sunlight provides plants 1.22 umols of 380nm blue energy.  Natural Sunlight Spectrum Blue Energy 1.2234 umols Typical Full Spectrum LED Lack 380NM UV Full spectrum LEDs have limited blue spectrum which peak at 460nm.   Full Spectrum LED 460nm Blue Energy Levels .0514 umols Full Spectrum LED with Supplemental 380NM UV  Adding supplemental 385NM UV creates a secondary peak of blue energy at 1.5047 umols at 12" from the canopy, roughly equaling natural sunlight.  Supplemental UV Spectrum plus Full Spectrum Blue Energy 1.5047 umols (3x greater)  Build Quality These are high quality units with a crystal glass lens cover to protect the diodes and allow for cleaning. The all aluminum frame dissipates what little heat the bar creates. At 30 watts the Lightbar sips energy too.  Spectrum Theory  Blue energy is scientifically known to help form more compact plants. More lush leaf growth, stronger and larger stems and tighter internodal spacing. We gave Dr. Bugbee, professor at Utah State University our 385NM UVA Lightbar:  "Your UVA lights arrived and we have confirmed their 385 nm peak. This looks like a high quality fixture." He went on to say: "Elevated exposure to UV photons is known to enhance the synthesis of UV blocking compounds in the leaves of many species and it is reasonable to think that UV photons can increase the synthesis of secondary metabolites in plants." And further, "I expect we will find value in dosing of CSativa plants with UV photons, but not surprisingly, the effects will likely interact with UV wavelength, intensity, timing of delivery, and growth stage." The UVA Lightbar fits neatly inside the frame of our Uniformity Pro LEDs as well as many other multi-bar style full spectrum LEDs. Use We recommend two of our UV-A LEDs over each 4'x4' area. The slim design allows them to be hung inside the frame of most 6 and 8 bar LEDs. Mounting height should be at the same level to avoid creating shadowing.  Control A basic digital 110V wall timer can be used, or if using the TrolMaster Hydro X we recommend the DSP-1 module for 110V or DSP-2 for 120V power connection and multiple on/off timer programming.   ~Technical Specs~ Product 30W(±5%) 20 UVA Diodes Per Bar 100-277VAC,50/60 Hz 102.3BTU IP65 44.88”x 2.24”x 1.53” 4.4 lbs Photometric File Download Product Warranty (see our warranty here) 3 year warranty
-22% sale
FGI 360-400NM UV-A Supplemental Spectrum LED Grow Light Set
FGI
FGI 360-400NM UV-A Supplemental LED Grow Light. Sold as set of two lights. $ 269.10 $ 342.00
DESCRIPTION The FGI 385nm UV Lightbar is designed to provide targeted supplemental blue energy to equal natural sunlight levels. At Forever Green, we strive to match natural sunlight with our lighting products. The reason for this is that plant morphology is affected by the spectral composition of light, which means that different wavelengths of light can promote different plant growth. In particular, blue light is known to encourage compact growth and strong stems, making it an essential part of plant development. By providing plants with the same level of blue light as they would receive from the sun, the FGI 385nm UV Lightbar ensures that they can grow and develop in the best possible way. As a result, it is an invaluable tool for any gardener or plant lover who wants their plants to thrive. Science behind using UV-A supplimental energy on plants Recent studies at Utah State University by Dr. Bruce Bugbee have shown that plants absorb and benefit from light between 380-740NM. This research has led to the study of E-PAR or extended PAR and is redefining measurement of photosynthetic light.  Below are the spectrum charts which compare natural sunlight to full spectrum LEDs and then to full spectrum plus supplemental UV.  The result is a closer match to sunlight providing more of the beneficial blue light that plants benefit from.  Sunlight Levels of 380NM UV Natural sunlight provides plants 1.22 umols of 380nm blue energy.  Natural Sunlight Spectrum Blue Energy 1.2234 umols Typical Full Spectrum LED Lack 380NM UV Full spectrum LEDs have limited blue spectrum which peak at 460nm.   Full Spectrum LED 460nm Blue Energy Levels .0514 umols Full Spectrum LED with Supplemental 380NM UV  Adding supplemental 385NM UV creates a secondary peak of blue energy at 1.5047 umols at 12" from the canopy, roughly equaling natural sunlight.  Supplemental UV Spectrum plus Full Spectrum Blue Energy 1.5047 umols (3x greater)  Build Quality These are high quality units with a crystal glass lens cover to protect the diodes and allow for cleaning. The all aluminum frame dissipates what little heat the bar creates. At 30 watts the Lightbar sips energy too.  Spectrum Theory  Blue energy is scientifically known to help form more compact plants. More lush leaf growth, stronger and larger stems and tighter internodal spacing. We gave Dr. Bugbee, professor at Utah State University our 385NM UVA Lightbar:  "Your UVA lights arrived and we have confirmed their 385 nm peak. This looks like a high quality fixture." He went on to say: "Elevated exposure to UV photons is known to enhance the synthesis of UV blocking compounds in the leaves of many species and it is reasonable to think that UV photons can increase the synthesis of secondary metabolites in plants." And further, "I expect we will find value in dosing of CSativa plants with UV photons, but not surprisingly, the effects will likely interact with UV wavelength, intensity, timing of delivery, and growth stage." The UVA Lightbar fits neatly inside the frame of our Uniformity Pro LEDs as well as many other multi-bar style full spectrum LEDs. Use We recommend two of our UV-A LEDs over each 4'x4' area. The slim design allows them to be hung inside the frame of most 6 and 8 bar LEDs. Mounting height should be at the same level to avoid creating shadowing.  Control A basic digital 110V wall timer can be used, or if using the TrolMaster Hydro X we recommend the DSP-1 module for 110V or DSP-2 for 120V power connection and multiple on/off timer programming. ~Technical Specs~ Product 30W(±5%) 20 UVA Diodes Per Bar 100-277VAC,50/60 Hz 102.3BTU IP65 44.88”x 2.24”x 1.53” 4.4 lbs Photometric File Download Product Warranty (see our warranty here) 3 year warranty
-28% sale
FGI Analog 3 Channel Spectrum Tuner Dimmer for FGI Lightpanel 500 LEDs
FGI
FGI Analog 3 Channel Spectrum Tuner Dimmer for FGI Lightpanel 500 LEDs $ 174.00 $ 238.80
  The FGI Tuning Controller. Commercial Grade Control For FGI Brand LED Grow Lights The FGI Controller allows for a robust fully passive hard wired interface to our FGI brand LED grow lights equipped with the RJ45 comm board interface. Simple plug and play connections using standard CAT6 network cable. Adjust warm white diodes, cool white diodes and red channel for spectrum tuning and dimming. Connect up to 100 of our Lightpanel products and have complete control over your spectrum and PPFD at canopy! Product Demo Video    
-22% sale
FGI 730 NM Supplemental Far Red LED Grow Light Bundle
FGI
FGI Far Red 700-760nm LED Grow Light. Sold as set of two Lights. $ 269.94 $ 342.00
The FGI Far Red Lightbar is the best dedicated far red LED grow light on the market today. It is built with a rugged all aluminum body that dissipates heat well, making it ideal for difficult indoor grow rooms. The lightbar also features a crystal lens that covers the diodes, making it waterproof and resistant to overspray. Additionally, the lightbar is designed to be easily moved and bumped around, making it one of the most versatile and user-friendly grow lights on the market. However, what sets this light apart from others is its ability to stimulate plant morphology. By emitting a high intensity of far red light, the FGI Far Red Lightbar encourages plant growth and development, making it the perfect choice for any serious gardener or farmer. If you're serious about getting the most out of your plants, you need to make sure they're getting the right kind of light. Our far red LED grow lightbar is specially designed to boost photosynthetic light levels in both veg and flower. Adding two of these bars to your 4x4 grow space will lift PAR by 10%. This means healthier plants and bigger yields come harvest time. So if you're ready to take your growing operation to the next level, pick up our far red LED grow lightbar today. You won't be disappointed. Use far red energy in veg to keep plants compact and strong. Recent studies at Utah State University by Dr Bruce Bugbee, have proven that additional energy, even in the red spectrum, keeps plants more compact.  The science of using far red light on plants Recent studies at the University of Texas El Paso / University of Texas Arlington, concluded that plants exposed to full spectrum plus dosing with far red spectrum, increased overall plant mass/yield and also improved terpene profiles. Read the study here. The light coverage of this product is unmatched. It will fully cover a 4' wide grow tray in bloom and generally covers a 2' wide swath. We recommend a pair for each 4x4 grow space and this unit comes with hardware which allows you to position it inside the frame of most 5 and 8 bar full spectrum LEDs. This light system is one of the best on the market and will give your plants the light they need to thrive. Order now and be sure to get your grow space set up correctly so you can achieve maximum light coverage. Targeting the Emerson Effect. The Emerson Effect is the name given to the increase in the rate of photosynthesis that occurs when chloroplasts are exposed to far red energy just before the nighttime lights off cycle. This effect was first discovered by scientist Alexander Emerson in 1883, and it has since been extensively studied by plant biologists. While the Emerson Effect is typically associated with increases in photosynthesis, it can also lead to other changes in plant physiology, such as increased cell division and growth. One way to take advantage of the Emerson Effect is to use our supplimental far red LED grow light for 10-15 minutes after full spectrum lights are turned off. If you are looking to create the ideal environment for your plants, an LED grow light can help you to achieve the Emerson Effect.   Far Red Spectrum Use We recommend 2 units per 4x4 grow space for daytime enhanced PPFD delivery. Height over canopy should be the same as your full spectrum LED but it will not hurt the plants to hang beneath a 4x4 LED.  Time General use: Studies indicate that dosing with far red light is most effective with 4 hours on, 4 off, and 4 on. We recommend a digital wall timer, or if using TrolMaster the DSP-1 (for 110V connections) or a DSP-2 (for 240V).  Emerson Effect:  10-15 minutes after full spectrum lights are turned off. Plant Morphology Theory Plants use phytochrome to detect and respond to red and far-red wavelengths. Phytochromes are signaling proteins that promote photomorphogenesis in response to red light and far-red light. Phytochrome is the only known photoreceptor that absorbs light in the red/far red spectrum of light (600-750 nm). (source: Wikipedia) Far Red light is believed to create a competitive response in plants, pushing desirable terpene production and assisting in the formation of trichomes.   Read more about Far Red and extended spectrum in this recent release from Design Lights Consortium: Read It Here       ~Technical Specs~ Product 30W(±5%) PPF 72.1 umols/s  100-277VAC,50/60 Hz 102.3BTU IP65 44.88”x 2.24”x 1.53” 4.4 lbs Photometric Test Report Download  Product Warranty (see our warranty here) 3 year warranty
-27% sale
FGI 730nm 4' Long Supplemental Far Red LED Grow Lightbar
FGI
FGI Far Red 700-760nm LED Grow Light. Supplimental spectrum red booster. $ 149.94 $ 203.94
Overview  The FGI Far Red Lightbar is the best dedicated far red LED grow light on the market today. It is built with a rugged all aluminum body that dissipates heat well, making it ideal for difficult indoor grow rooms. The lightbar also features a crystal lens that covers the diodes, making it waterproof and resistant to overspray. Additionally, the lightbar is designed to be easily moved and bumped around, making it one of the most versatile and user-friendly grow lights on the market. However, what sets this light apart from others is its ability to stimulate plant morphology. By emitting a high intensity of far red light, the FGI Far Red Lightbar encourages plant growth and development, making it the perfect choice for any serious gardener or farmer. If you're serious about getting the most out of your plants, you need to make sure they're getting the right kind of light. Our far red LED grow lightbar is specially designed to boost photosynthetic light levels in both veg and flower. Adding two of these bars to your 4x4 grow space will lift PAR by 10%. This means healthier plants and bigger yields come harvest time. So if you're ready to take your growing operation to the next level, pick up our far red LED grow lightbar today. You won't be disappointed. Use far red energy in veg to keep plants compact and strong. Recent studies at Utah State University by Dr Bruce Bugbee, have proven that additional energy, even in the red spectrum, keeps plants more compact.  The science of using far red light on plants Recent studies at the University of Texas El Paso / University of Texas Arlington, concluded that plants exposed to full spectrum plus dosing with far red spectrum, increased overall plant mass/yield and also improved terpene profiles. Read the study here. The light coverage of this product is unmatched. It will fully cover a 4' wide grow tray in bloom and generally covers a 2' wide swath. We recommend a pair for each 4x4 grow space and this unit comes with hardware which allows you to position it inside the frame of most 5 and 8 bar full spectrum LEDs. This light system is one of the best on the market and will give your plants the light they need to thrive. Order now and be sure to get your grow space set up correctly so you can achieve maximum light coverage. Targeting the Emerson Effect. The Emerson Effect is the name given to the increase in the rate of photosynthesis that occurs when chloroplasts are exposed to far red energy just before the nighttime lights off cycle. This effect was first discovered by scientist Alexander Emerson in 1883, and it has since been extensively studied by plant biologists. While the Emerson Effect is typically associated with increases in photosynthesis, it can also lead to other changes in plant physiology, such as increased cell division and growth. One way to take advantage of the Emerson Effect is to use our supplimental far red LED grow light for 10-15 minutes after full spectrum lights are turned off. If you are looking to create the ideal environment for your plants, an LED grow light can help you to achieve the Emerson Effect. Far Red Spectrum Use We recommend 2 units per 4x4 grow space for daytime enhanced PPFD delivery. Height over canopy should be the same as your full spectrum LED but it will not hurt the plants to hang beneath a 4x4 LED.  Time General use: Studies indicate that dosing with far red light is most effective with 4 hours on, 4 off, and 4 on. We recommend a digital wall timer, or if using TrolMaster the DSP-1 (for 110V connections) or a DSP-2 (for 240V).  Emerson Effect:  10-15 minutes after full spectrum lights are turned off. Plant Morphology Theory Plants use phytochrome to detect and respond to red and far-red wavelengths. Phytochromes are signaling proteins that promote photomorphogenesis in response to red light and far-red light. Phytochrome is the only known photoreceptor that absorbs light in the red/far red spectrum of light (600-750 nm). (source: Wikipedia) Far Red light is believed to create a competitive response in plants, pushing desirable terpene production and assisting in the formation of trichomes.   Read more about Far Red and extended spectrum in this recent release from Design Lights Consortium: Read It Here ~Technical Specs~ Product 30W(±5%) PPF 72.1 umols/s  100-277VAC,50/60 Hz 102.3BTU IP65 44.88”x 2.24”x 1.53” 4.4 lbs Photometric Test Report Download  Product Warranty (see our warranty here) 3 year warranty
-64% sale
The FGI Square 2  Affordable, Compact, Popular. For Veg or Bloom.
FGI
FGI Square 2 220W LED Grow Light, Extended PAR 400-760nm Spectrum $ 174.60 $ 478.80
OVERVIEW Looking to get the most out of your 2'x2' grow space? The FGI Square 2 is the perfect LED grow light for you! With its innovative square within a square design, this light provides uniform coverage over your plant canopy, ensuring maximum yield and potency. Plus, our full spectrum + red + far red design is unlike anything else on the market, making the FGI Square 2 the perfect choice for any serious grower. Great Build Quality. Excellent Spectrum & Light Levels. Running at only 220 watts the Square 2 runs cool in small grow spaces. Add two or more to increase PAR levels. We've seen growers use 4 of these in a 5'x5' operating at 880 watts with incredible results in flower. LIGHT LEVELS PAR levels at 15" are equal to a 600 watt HPS. At 12" PAR levels exceed 1000W HPS. SPECTRUM What makes the square different? We add both 720NM (far red) diodes as well as 660nm (red) diodes along with 4000K CCT full spectrum. Our Far Red Boosted Spectrum Maximizes Growth  Top bin Shenzhen Ledida diodes. Including 6% 720nm infrared plus + 27% 660nm red which growers have found is the key to potent flowers. PAR Map The FGI Square 2 has a powerful footprint over a 2'x2' space as shown in this 3'x3' PAR map. BUILD  As with all FGI brand grow lights we don't skimp on construction quality. A clear lens protects the diodes from accidental overspray. This compact 20" x 20" unit is lightweight too at just 12 lbs. so it is easy to handle and hang.  SAFE Our lights come with full five year warranties making them the safe long term choice. our 60 day no-hassle return policy means no regrets after unboxing. You'll recognize the quality of our product from the care we take in packaging and shipping. The FGI Square. Give your plants the gifts that Mother Nature provides in the wild. ~Technical Specs~ Product Diodes (White)   Brand name: Shenzhen Lideda Number of pieces 360 Total Diode Wattage Capacity (not actual draw) 300W Maximum Advertised Wattage 300 Equivalent Wattage 1000 CCT   4000K CRI 80 CRI Other color Diodes (Red) Brand Name: Shenzhen Lideda Number of pieces 96 CCT NA Wavelength 655-665nm Other color Diodes (FR)   Brand Name: Shenzhen Lideda Number of pieces 24 CCT NA Wavelength 730-745nm Ratio mix white/red (%) 3:1   Product Warranty/Longevity   Warranty (years) 5 years Lifetime (L-90) - in hours 50,000 hours   Photosynthetic Light Measurements   PPF Output* 436.1 umol/s PPF Efficacy* PPF 2.1umol/J   Photopic Light Measurements Luminous Flux* 30342lm Luminous Flux Efficacy 151.7lm/w   Other   Input Power Watts 218 Input Voltage 110V Cord length 8' (2.44m, 18AWG ) Plug type (note if bare whip) Molded 110V   Product Dimensions   Dimensions W x L x H (inches) 20x20x3.5 Weight (pounds) 10 Operating Temp range (F) -20℃ — +40℃ IP rating (UL-ETL or estimated final UL-ETL) IP(UL- UL-ETL) IP20   Physical Dimensions   Package Dimension W x L x H (inches) 24x23x5 Inner carton (Yes/No) NO Inner Carton Weight NO Master Outer carton (Yes/No) YES Number of pieces in Master Carton (1, 2, 3) 1 Master carton weight (lbs) 2   Dimming / Tuning  Dimming (Yes/No) Yes   Product Warranty (see our warranty here) 5 years
Inventronics 600W LED Driver Model EUD-600S560DT
FGI
Inventronics 600W LED Driver Model EUD-600S560DT $ 174.00
Inventronics 600W 5600 mA Constant Current LED Driver NEW  Used in the FGI Uniformity Pro 640 LED and many others... Features: Programmable, Enabling Hundreds of ConfigurationsControls-ReadyAlways-On Auxiliary Power: 12Vdc, 200mADim-to-Off with Low Standby Power Dimming Controls: 0-10V, PWM, Multiple Timers High Level of Built-in Surge Protection:6kV DM, 10kV CMOutput Lumen CompensationThermal Sensing and Protection for LED ModuleClass 2 and SELV OutputIP67 and UL Dry/Damp/Wet LocationTYPE HL, for use in a Class I, Division 2 Hazardous (Classified) Location
SpotOn Sprayer Calibrator Model SC-2
Innoquest
SpotOn Sprayer Calibrator Model SC-2 $ 214.80
Provides quick and accurate flow rate checking of individual sprayer nozzles. This model is best for flow rates below 2.25 GPM typical of herbicide and insecticide application. Our SC-5 model is best for flow rates up to 5 GPM. FEATURES: NO CALCULATIONS OR APP DOWNLOAD REQUIRED: Automatically calculates and displays tip flow rate in GPM, LPM, oz/min, tip wear in %, and application rate in GPA/LPH (just enter your speed and nozzle spacing).FAST AND SIMPLE OPERATION: Readings in about 10 seconds per tip.QUICKLY FIND WORN SPRAY NOZZLE TIPS: Industry guidelines recommend tip replacement once flow rate exceeds that of the new tip by 10%.ACCURATELY MEASURE TRUE TIP FLOW RATE: Today’s high-tech sprayers can only be properly calibrated and confirmed with this knowledge. SPRAYER CALIBRATOR MODEL SC-2 SPECS: Range & Units: 0.02 – 2.25 GPM, 0.08 – 8.52 LPM, 3 – 288 oz/min (GPM in US Gallons) Accuracy: +/- 2% or 1 Digit Resolution: 0.01 GPM, 0.01 L/min, 1 oz/min Fluid Compatibility: Water & Water Based Solutions Only Battery: CR2032 Included (3 Year Battery Life) Size: 3” (7.6 cm) Dia x 8.75” (22 cm) Tall Weight: 0.6 lbs (272 g)
-29% sale
SpotOn Universal Flow Meter Model SC-5
Innoquest
SpotOn Universal Flow Meter Model SC-5 $ 286.80 $ 402.00
Quickly and accurately check water flow from nozzles, faucets, sprayers, and showers up to 5 GPM. Features: Provides High-Resolution Digital Flow Rate Display Within Seconds Collapsible 4.25in(10.8cm) Dia. Rubber Collection Funnel For Shower Heads Fits Under Faucets With As Little As 7.5in(19cm) Clearance Height Internal Diffuser Pad Controls Strong Nozzle Spray Simple Rugged Design Has No Moving Parts Self-Contained For One-Handed Operation     SC-5 UNIVERSAL FLOW METER SPECS: Range: 0.08-5.00GPM, 0.30-19.00LPM, 2-1140L/hr Accuracy: Greater of +/- 3% or 1 Least Significant Digit Resolution: 0.01GPM, 0.01LPM, 1L/hr Fluid Compatibility: Water & Water Based Solutions Only Battery: CR2032 Lithium Coin Cell (2-3 Year Battery Life) Size: 4.5in(11.4cm)W x 5in(12.7cm)L x 7.5in(19cm)Tall – 9in(23cm)Tall with funnel extended Weight: 0.7 lbs(0.3kg)
-5% sale
Trolmaster  4RS-1 4 Outlet Expander Station
Trolmaster
Trolmaster 4RS-1 4 Outlet Expander Station $ 165.30 $ 174.00
The 4RS-1 is a universal 4-outlet power expansion module. It can be used with any of TrolMaster’s “plug-in” style device modules to expand the number of devices that can be controlled by the Hydro-x. A single 120-240 volt “trigger” cable on the 4RS-1 connects to your device / control module. When the device module is activated by the Hydro-x, the 4RS-1 trigger cable will turn on each of the 4 receptacles on the 4RS-1 with a 3 second time delay between each outlet being activated. That minimizes high start-up (inrush current) and allows up to 4 devices to be safely controlled. The 4RS-1 must be installed with a 120/240 volt power circuit (up to 50-amps @ 240vac). Three wire terminals inside the unit accept up to #6 AWG wire making connections to the power source easy.
-5% sale
Trolmaster Hydro X HS-1 Humidistat Station For Dehumidifier
Trolmaster
Trolmaster HS-1 Humidistat Station For Dehumidifier w/24V Terminal $ 139.66 $ 147.00
  LCD Display, Easy Operation Seamless Connection with Hydro-X Micro-SD for Firmware Upgrade Address Assignment Plug & Play The HS-1 from TrolMaster is used to control commercial dehumidifiers. Most larger / commercial dehumidifiers have a “low-volt” control option so the dehumidifier can be controlled by an external humidistat. The HS-1 works and is wired exactly like an external humidistat. The HS-1 is the best way to control your dehumidifiers by eliminating the need to control the high-amperage / inrush current associated with dehumidifiers. Package Includes: 1 x Humidistat Station (HS-1) 1 x 16ft RJ12 Cable 1 x 4ft RJ12 Cable 1 x RJ12 T-Splitter Specifications: Output Voltage: 24V Maximum Current: 1A Working Environment: Temperature 32-122°F, Humidity=90% Packaging Dimensions: 160mm(L) x 86mm(W) x 86mm(H)    
-5% sale
Trolmaster MBS-S8 Hydro-X CO2 Sensor - Accessory for HCS-1 Controller
Trolmaster
Trolmaster MBS-S8 Hydro-X CO2 Sensor - Accessory for HCS-1 Controller $ 253.08 $ 266.40
 Description The optional CO2 Sensor (MBS-S8) measures the CO2 PPM within the growing area. Using the MBS-S8 allows the users to connect and control their supplemental CO2 system using the Hydro-X. *Used in combination with one or more DSC-1 CO2 device modules.
-5% sale
Trolmaster TS-2 Thermostat Station 2 (For Heat Pumps & Conventional HVAC)
Trolmaster
Trolmaster TS-2 Thermostat Station 2 (For Heat Pumps & Conventional HVAC) $ 139.66 $ 147.00
The TS-2 thermostat stations is designed to replace a thermostat connected to a standard HVAC unit. The TS-2 can be used to control most HVAC systems including heat pump and multi-stage HVAC systems. The  TS-2 is wired to the HVAC system using the same low-voltage thermostat cable, and has the standard color-coded wiring as most thermostats. The Hydro-x allows separate Day and Night settings for each of up to (4) TS  modules, so multiple HVAC systems can be controlled by a single Hydro-X system. The TS-2 also has an adjustable delay time for each HVAC systems being activated. That minimizes high start-up (inrush current) and allows up to 4 HVAC systems to be safely controlled. LCD Display, Easy Operation Seamless Connection with Hydro-X Micro-SD for Firmware Upgrade Address Assignment Plug & Play 
5% sale
TrolMaster TSH-1 Temperature / Humidity Station
Trolmaster
TrolMaster TSH-1 Temperature / Humidity Station $ 147.00 $ 139.66
  The Trolmaster TSH-1 Temperature / Humidity Station is a 0-10 volt analog output control station that works with the HCS-1 and HCS-2 controllers. The TSH-1 can be configured to control either a temperature or a humidity device that requires a variable 0-10 volt input signal. The TSH-1 is capable of controlling variable speed fans, vents or any other device that accepts a 0-10 volt input. It features separate day and night “idle” speed settings built-into the TSH-1 as well as separate Day / Night setpoints accessed through the HCS controller.

60 DAYS EASY RETURNS

FREE US SHIPPING

FAST CHECKOUT

SAME DAY FULFILLMENT

(Orders before 11am pst)