Model-H Plus is a true 5’ wide LED grow light designed to be used in indoor grow rooms for high PPFD cultivation practices in vertical farming. The fixture has a total of 3368 pieces of highly efficient top-bin diodes with a total wattage upgraded to 720 watts and producing 2061 total PPF output. Users can have onboard dimming or adjust the spectrum and light intensity by connecting the fixtures with a controller. Four spectrum channels including UV, White (full spectrum), Deep Red and Far Red are fully controllable to customize your desired spectrum/recipe of light your plants need. (Only available on the TrolMaster HCS-2/3). The patented plug-and-play light bar design also offers ease of installation and facilitates future maintenance. Key Features: Wide Coverage: Designed to cover 4' wide grow racks or tables efficiently. High Efficiency:  Equipped with 2888 top-bin LED diodes. Total wattage of 740 watts. Achieves an 18% increase in PPF performance over the original Model-H LED. Adjustable Lighting: Onboard dimming for easy intensity adjustments. Connectable to a controller for precise spectrum and light intensity adjustments. Spectrum Control: Four controllable spectrum channels: 380NM UVA, White Full Spectrum, 660nm Red and 730 nm Far Red.  Customizable light spectrum/recipes tailored to plant needs (Spectrum Control available with HCS-2/3). ThinkGrow Model H Spectrum  Benefits: Enhanced Plant Growth: The ability to customize light recipes helps in optimizing plant growth for different stages, leading to better yields. Energy Efficiency: High-efficiency diodes reduce energy consumption while maximizing light output. Versatility: Suitable for various growing environments and applications.User-Friendly: Easy installation and maintenance save time and reduce operational complexity. This new model is a significant upgrade from the original Model-H, offering improved performance and greater flexibility for serious growers looking to optimize their cultivation setup. ThinkGrow New Model H DLC #: Product ID: H-OPZHXB Tech Sheet Download Spec Sheet Download Product Manual Download Box includes:  1x Model-H Driver8x Model-H LED Light Bars1x 12' 240V Power Cord Wattage Draw (Tested):  741.3W (20 watts Far Red) PPF (Tested):  2061 Efficacy (Tested):  2.78 umols/j Power Factor (Tested):  >=.96% Fixture Dimensions 45" (L) x 44.6" (W) x 4.44" (H)  Lifetime:  L90 : >54,000 hrs  Warranty:  5 Years Standard Warranty Input Voltage:  Autosensing 100-277 V  Amp Draw:  6.23A @120\/, 3.09A@240\/, 2.71A@277V BTU 2456 Mounting Height:  >  (15.2cm) Above Canopy  Weight:  38.8 lbs  

The Hortibest JF-850A LED Grow Light boasts Osram high output diodes and a full spectrum design for optimal plant growth. With a 850W output level, it is a 1:1 replacement for HPS lights, using existing electrical cables. 1:1 replacement from HPS Compact design with excellent heat dissipation Various Spectrum options for sole and supplementary lighting Design for both greenhouse and indoor grow room Featuring power and dimming daisy-chain capabilities, the Hortibest JF-850 LED Grow Light offers centralized control for a streamlined installation. Equipped with an integrated power supply, it ensures a hassle-free setup process. Most efficient spectrum   Lighting layout PAR MAP at 18"   Maximize your indoor gardening potential with the Hortibest JF-850A LED Grow Light. It  covers up to a 5'x5' area, promoting healthier and more abundant yields. Achieve optimal plant growth with its high spectral efficiency of 2.89 umol/j. Choose between multiple spectrum outputs to meet your specific goals. Full spectrum, full spectrum plus far red or full spectrum plus far red and blue.  DLC Product ID: H-2GQYXZ Spec / Tear Sheet Product Brochure Project Install Photos Model Jellyfish 850A Power850 W AC input Voltage AC120-277 Spectrum SRF Efficacy 2.89 umol/J PPF(umol/s) 2550 umol/s Heat Output 2901 BTU/h Thermal Management Passive Operating Temperature -4-113 (-20-45℃） Storage Temperature -40-176 (-40-80℃ Power Factor ≥0.96 Light Distribution 120° Dimming 0-10V Demission 745x290x108mm THD ＜15% Lifetime 50000h IP Rating/Location Rating IP65/Wet Certification DLC/ETL/UL8800/CE    

The Hortibest JF-700A LED Grow Light boasts Osram high output diodes and a full spectrum design for optimal plant growth. With a 715W capacity, it is a 1:1 replacement for HPS lights, using existing electrical cables. 1:1 replacement from HPS Compact design with excellent heat dissipation Various Spectrum options for sole and supplementary lighting Design for both greenhouse and indoor grow room Featuring power and dimming daisy-chain capabilities, the Hortibest JF-700 LED Grow Light offers centralized control for a streamlined installation. Equipped with an integrated power supply, it ensures a hassle-free setup process. Most efficient spectrum   Lighting layout PAR MAP at 18"   Maximize your indoor gardening potential with the Hortibest JF-700A LED Grow Light. It  covers up to a 5'x5' area, promoting healthier and more abundant yields. Achieve optimal plant growth with its high spectral efficiency of 2.89 umol/j. Choose between multiple spectrum outputs to meet your specific goals. Full spectrum, full spectrum plus far red or full spectrum plus far red and blue.  DLC Product ID: H-2GQYXZ Spec / Tear Sheet Product Brochure Project Install Photos Model Jellyfish 700A Power 700W AC input Voltage AC120-277 Spectrum SRF Efficacy 3.0umol/J PPF(umol/s) 2550umol/s Heat Output 2901BTU/h Thermal Management Passive Operating Temperature -4-113 (-20-45℃） Storage Temperature -40-176 (-40-80℃ Power Factor ≥0.96 Light Distribution 120° Dimming 0-10V Demission 745x290x108mm THD ＜15% Lifetime 50000h IP Rating/Location Rating IP65/Wet Certification DLC/ETL/UL8800/CE    

The ThinkGrow Model I-Plus LED fixture is a high-performance grow light designed specifically for horticulture cultivation. The compact design, featuring a built-in driver, ensures a balance between energy efficiency and an optimal human work environment. The innovative V-shape design on the LED panel enhances light distribution, allowing for a reduced height from the canopy, which in turn minimizes light energy loss. Benefits of Light Intensity This LED grow light offers outstanding efficiency with a light intensity of 2.7 µmol/J, ensuring that your plants receive the maximum amount of usable light energy per unit of electricity consumed. High light intensity promotes vigorous plant growth, enhances photosynthesis, and increases yields. This efficiency translates into lower energy costs, making it an economical choice for both commercial and home growers. Benefits of the Color Spectrum The fixture features four fully controllable spectrum channels—UV, White, Deep Red, and Far Red—providing the flexibility to dial in the exact light recipe your plants need. UV (Ultraviolet): UV light stimulates the production of essential oils and resins, enhancing the flavor, aroma, and overall quality of your crops. It also helps in controlling mold and mildew, ensuring healthier plants. White Light: Mimicking natural sunlight, white light supports all stages of plant growth, from seedling to flowering. It provides a balanced spectrum that enhances overall plant health and growth. Deep Red: Deep red light is crucial for the flowering and fruiting stages of plant development. It promotes the production of flowers and fruits, leading to higher yields and better-quality produce. Far Red: Far red light influences plant morphology, encouraging stem elongation and leaf expansion. This spectrum is essential for optimizing canopy penetration, ensuring that light reaches the lower parts of the plants, promoting uniform growth. With the TrolMaster HCS-2/3 controller, you can fully control these spectrum channels, tailoring the light to the specific needs of your plants at different growth stages. The external control capability allows for the management of up to 256 fixtures per channel, making it a versatile solution for large-scale operations. In summary, this high-performance LED grow light not only maximizes energy efficiency but also enhances plant growth through its innovative design and spectrum flexibility, ensuring your plants receive the precise light they need for optimal growth and yields. Spec Sheet Download

The Model-W is a high performance LED grow light for the horticul­ture cultivation. It is designed for high PPFD cultivation practices. Full spectrum design covers each critical phase of growth from vegetative to flowering. An independent Far Red 730nm channel is designed to target Phytochrome Far Red in photomorphogenic lighting applica­tions. Base on research, introducing far-red light after the lights have been turned off can lengthen the dark period to encourage the flowering process.  The Full spectrum design covers each critical phase of growth from vegetative to flowering. An independent Far Red 730nm channel is designed to target Phytochrome Far Red in photomorphogenic lighting applications. ThinkGrow Model W Spectrum   On-Board DimmingGroup ControlExternal ControllabilityIP56 WaterproofPlug and PlayOutstanding EfficiencyFull Spectrum Design ThinkGrow Model W Spec Sheet ThinkGrow Model W Product Manual ThinkGrow Model W Product Brochure Specifications:  PPF: 1600 umols Efficacy: 2.6 umols/j Input Power: Max 630W (Full Spectrum)/ 20W (Far Red)  Power Factor: >=9% Fixture Dimensions: 45"L x44.6"W x4.44"H Mounting Height: > 6"  Above Canopy Lifetime: > 55,000 hrs Warranty: 5 Year Warranty Input Voltage: Autosensing 100-277  Amp Draw:L 120V /5.26A, 240V /2.68A, 277V /2.38A Fixture Weight: 38.8 lbs 

Unlock a new level of savings with our premium quality factory-direct FGI Hortibest LED grow lights. Get great performance at prices that cut out the middle man. Shop and experience the Hortibest difference. Overview   Very high PPF output at 1716 umols/ms High efficacy diodes at 2.6 umols/j 5' long x 6" wide. Tightly spaced diodes produce maximum light levels. Osram top bin diodes in warm white, cool white and deep red creates our FGI spectrum. AC daisy chain - connect up to three LEDs to a single power receptacle. Dims to off with our FGI Hortibest Master Controller  DLC listed. 5 year manufacturer warranty. Featuring Commercial linear 5' long LED grow light for greenhouse or indoor top lighting applications. The 6" wide slim form factor won't block the penetration of sunlight while providing supplementary lighting. For indoor applications, lighting grids should be end to end, with 3' between the rows to achieve 1200 PPF uniformly at 24" above plant canopy.  Industry leading photosynthetic light output. 1716 PPF & 2.6 umols/j. DLC listed for rebates nationwide.  The horizontal heat sinks efficiently dissipate heat to help get a longer lifespan of the light. And the fanless design eliminates fan noise and fan life issues. Our linear LED also comes in several other wattage and size configurations from 330W to 850W output and from 45"-60"/ Contact us to learn more about varying sizes for your lighting applications.  This high-quality light provides great uniformity when mounted in an array, with our digitally tuned spectrum providing just enough artificial sunlight based on years worth experience designing grow lights. it’s 59” length and 660 watts of power supplies ideal light intensity over greenhouse planting rows. This unit replaces HPS lighting on the same grid layout 1:1.  The Shark offers a variety of controller options as well. From TrolMaster to the Hortibest Master Controller. Connect up to 4 on a single 230V power connection with our AC daisy chain accessory cable to cut down on the number of power receptacles needed.        AC Power Daisy Chain Specs Spectrum     PAR Chart 24" - 4'x6' area  Dimming Control  Options Master Controller 2 channel lighting controller for two zones of MH LEDs 2 zone temp and humidity monitoring included  Master Controller    Spec Sheet: Download  Hortibest LED Dimming Control Wiring Diagram Specifications Name: Shark X-15 DLC Product ID: H-J5UG39 Model Number: SH-X-660A FSG 28 D1 Power Consumption: 660W max AC Input Voltage, Single Phase (Three Phase Available Optionally) AC120-277V,50/60Hz  Power Factor > .09 Spectrum: FSG  Efficiency: 2.6 umols/j PPF Output: 1716 @ 660W  (Tested Photometric Performance: 1822 umols/ms @680W 120V) Heat Output: 2244 BTU Environmental Operating Temperature: Min -4 - Max 113°F (Min -20 - Max 45°C) Dimensions: Length 59.1 x Width 5.1 x  Height 7.9 IN (Length 1500 x Width 129 x Height 200 MM) Weight: 27.6 LBS (12.5 KGS) Dimming: 0-10V dimmable to off Dimming Controllers: FGI Hortibest Master Controller  Lifetime: L90: > 50,000 HRS L70: >78,000HRS  IP Rating: IP65/Wet Certifications: ETL / UL 8800 / CE / DLC Warranty: 5 Year Manufacturer Provided Standard Warranty          

Premium quality factory-direct FGI Hortibest LED grow lights. Get great performance at prices that cut out the middle man. Shop and experience the Hortibest difference. Overview   Our highest efficacy and output at 2.7 umols/j Higher hanging height over a 4' x 4'. Perfect Light Uniformity at 1944 PPF output. Osram top bin diodes in warm white, cool white and deep red creates our FGI spectrum. AC daisy chain - connect up to three LEDs to a single power receptical. Dims to off with our FGI Hortibest Master Controller  DLC listed. 5 year manufacturer warranty.   With optional far red and UV outrigger. Add our three channel Master Controller and take full control over your lighting.  Featuring: Looking for a powerful and efficient LED grow light to help you get the most out of your plants? Look no further than the Hortibest H8 Slimline 720W LED Grow Light! Our 720W LED will blow your plants socks off at 1944 PPF. Grow in PAR levels as high as 1500 umols/ms at 12" from canopy. This light rocks efficiency at 2.7 umols/j - a measure that compares power consumed versus light output.  We use the latest multi-package diodes to produce full spectrum light that your plants will love.  Ideal for 4' x 4' spaces, this light has multiple settings to help you optimize growth and yield. Need to tone it down a bit? The built in dimming knob makes it quick and easy without complex controls required.  With the extended daisy chain for power (not just dimming), you'll be able to easily connect multiple lights for even coverage. Get the perfect growing conditions for your plants with the Hortibest H8 Slimline 720W LED Grow Light! Highlights   Osram LED diodes, proprietary built in driver (enclosed in light rails) 5 year warranty DLC Listed 1944 PPF 2.7 umols/j Spectrum controllable with optional Moray UV-A and Far Red Module. Now shipping.   AC Daisy Chain (power and 0-10V dimming - depends on voltage supplied) Easy to install. No assembly required. Unfold, plug and play. Comes with 120V and 240V plugs. Comes with rope hangars.  Universal 0-10V Control. (TrolMaster, FGI Dimming Controller etc...) Super high PPF output of 1944 umols/s allows for a higher hanging height over canopy, up to 24" at over 1000 PPFD.  DLC listed for rebates in the US, this light is made by a top factory in China and distributed by Forever Green Indoors.  Osram LEDs, and a super unique built in internal driver with light-to-light daisy chaining to power which reduces the number of outlets that need to be installed in the grow space.  For example; at 240V, 4 units can be daisy chained to a single receptacle at 2.9 amps per light.  The H8 is lightweight at 23 lbs, and compact in size at 42"x42"x2" with its internal driver. This unit is less expensive to ship and easier to hang and manage than heavier or larger LED lights.  As with all our LEDs it uses a fanless design. Does not make noise and produces a relatively low amount of heat output at 2448 BTUs.    PAR Chart (Single unit) Spectrum 3850K Options Master Controller 2 channel lighting controller for two zones of MH LEDs 2 zone temp and humidity monitoring included  Or can be used to control UV and FAR Red module channels. A second Master Controller would then be used to control two zones.  Master Controller    UV and Far Red LED Module   Spec Sheet Hortibest LED Dimming Control Wiring Diagram ~ specs DLC Listed: H8 720W: OC-H-720A FSG 28 D1 Fanless Design IP65 Wet Rated Dimming: 0-10V Daisy Chain. RJ-14 light to light cable included Proprietary built in driver (enclosed in light rails) AC power pass through for AC Daisy Chain Slim design and 180 degree foldable Input Voltage:120-277VAC 42" x 42" x 2" (1067 x 1077 x 50mm ) Weight 22.7Ibs (10.3kg) AC Voltage 120V 208V 230V 277V AC Current 6.26A 3.55A 3.18A 2.66AAC Power 748W 729W 720W 714WPower Factor 0.996 0.987 0.983 0.969Daisy Chain Quanty 2Pcs 3Pcs 4Pcs 5Pcs Heat Output 2448 BTU/h Max 6.7A@120VAC; Max 3.9A@208VAC;Max 3.5A@230VAC; Max 2.9A@277VAC; 5 Year Standard Warranty link to product spec sheet download   

Unlock a new level of savings with our premium quality factory-direct FGI Hortibest LED grow lights. Get great performance at prices that cut out the middle man. Shop and experience the Hortibest difference. Overview   High efficacy diodes at 2.8 umols/j 4' long x 4' wide. Perfect Light Uniformity at 1848 PPF output. Osram top bin diodes in warm white, cool white and deep red creates our FGI spectrum. Proprietary built-in driver (enclosed in light rails).  AC daisy chain - connect up to three LEDs to a single power receptacle. Dims to off with our FGI Hortibest Master Controller  DLC listed. 5 year manufacturer warranty.   FGI MH Installation Featuring The H8 660W LED Grow Light is the perfect solution for commercial gardens that need high PPFD output. This unit is designed to be hung under shelves or close to the canopy, and it can be daisy-chained with up to four other units on 240V power. It also has a dimming knob and can be controlled by a variety of 0-10V dimmers, making it a versatile and easy-to-use grow light. Highlights Internal LED driver enclosed within side rails. Daisy Chain (power and 0-10V dimming - depends on voltage supplied) Easy to install. No assembly required. Unfold, plug and play. Comes with 120V and 240V plugs. Comes with rope hangars.  Universal control (TrolMaster, FGI Dimming Controller etc...) The unit is DLC listed for rebates in the US and consumes just 660W of power while outputting 1716 PPF at an efficient 2.6 umols/j.  An internal LED driver keeps the unit streamlined at only 2" deep making it ideal for hanging undershelves or close to ceiling allowing for maximum plant height in the grow space.  It can be power daisy chained, up to 4 units on 240V power, reducing the number of receptacles needed in the grow space.  It ships with a 220V cord with a 110V adapter plug, rope hangars and a 0-10V RJ-16 light to light daisy chain cable.  Options Master Controller 2 channel lighting controller for two zones of H LEDs 2 zone temp and humidity monitoring included  Or can be used to control UV and FAR Red module channels. A second Master Controller would then be used to control two zones.  Master Controller    UV and Far Red LED Modlue   PAR Charts (single unit) Spectrum 3850K Spec Sheet Download  Hortibest LED Dimming Control Wiring Diagram ~ specs DLC: H8 660W: OC-H-660A FSG 27 D1 Weight 23lb Size 42 x 42 x 2 Folding 2244 BTUs Dimming: 0-10V Daisy Chain. RJ-14 light to light cable included  Voltage                          120V     208V      230V     277V AC Current                      5.76A    3.31A    2.99A    2.56AAC Power                        689W    675W    667W    671WPower Factor                   0.996     0.980    0.970     0.945Daisy Chain Quanty         2Pcs     3Pcs       4Pcs     5Pcs  

ThinkGrow Model-I LED Grow Light: Optimized for Greenhouse and Indoor Cultivation The ThinkGrow Model-I is a high-performance LED grow light designed specifically for greenhouse and single-level indoor horticultural cultivation. This fixture integrates cutting-edge features to enhance energy efficiency, light distribution, and overall plant growth. Key Features and Benefits Compact and Efficient Design: Built-in Driver: Ensures energy efficiency while maintaining a balanced work environment for growers. Innovative V-Shape Design: Improves light distribution, reducing the height needed from the canopy and minimizing light energy loss. Full Spectrum and UV Light: Natural Sunlight Mimicry: The full-spectrum design with UV provides a light quality similar to natural sunlight, covering all critical growth phases from vegetative to flowering. Enhanced Far Red Spectrum: Far Red Channel. Offers an additional Far Red spectrum channel, allowing a 10-15 minute exposure to accelerate the flowering cycle (External Controller required). Efficiency: Outstanding efficiency at 2.54 umol/J, ensuring optimal light utilization.Advanced Control Capabilities: External Control: Allows up to 256 fixtures per channel, providing extensive control options for large-scale operations. Compatibility: Designed to work seamlessly with TrolMaster Hydro-X control systems. Independent Channel Control: Using the TrolMaster lighting adaptor LMA-T, the Full Spectrum and Far Red channels can be independently controlled. This feature enables the Far Red channel to be activated 10-15 minutes after lights-off, expediting the flowering process. Application and Use Greenhouse Cultivation: Ideal for use in greenhouses, where efficient light distribution and control are crucial. Single-Level Indoor Cultivation: Perfect for indoor grow setups, providing a balanced light environment that supports all stages of plant growth. Conclusion The ThinkGrow Model-I LED Grow Light is a state-of-the-art solution for professional horticultural cultivation. Its compact, efficient design, combined with advanced light spectrum control and compatibility with TrolMaster systems, makes it an ideal choice for both greenhouse and indoor applications. Achieve optimal plant growth and accelerated flowering with the Model-I’s superior technology and performance. Spec Sheet Download

Model-V LED Grow Light The Model-V is a high-performance LED grow light engineered for horticultural cultivation. It is specifically designed to support vegetative cultivation practices and is ideal for both commercial cultivators and home hobbyists, particularly those cultivating without CO2 supplementation. Key Features Full Spectrum Design: Provides comprehensive coverage for all critical growth phases, from vegetative to flowering stages. Independent Far Red Channel: Features a 730nm Far Red channel to target Phytochrome Far Red.Far Red light introduction post-lights-off can extend the dark period, promoting the flowering process based on scientific research. Benefits Optimized Plant Development: The full spectrum design ensures that plants receive the appropriate light for each growth phase, enhancing overall development and yield. Enhanced Flowering Process:  The independent Far Red channel supports advanced photomorphogenic lighting applications, crucial for encouraging the flowering process. Versatility:  Suitable for various cultivation environments, whether for commercial or home use. Application Vegetative Cultivation: Perfect for growers focusing on the vegetative stage, ensuring robust and healthy plant development. Commercial and Hobbyist Use:  Designed to meet the needs of both large-scale commercial operations and small-scale home cultivation setups. The Model-V LED Grow Light combines advanced features and versatility to meet the diverse needs of cultivators, ensuring optimal growth and flowering processes. Spec Sheet Download Product Manual Download Specifications PPF:  900 µmolls Efficacy:  2.6 µmol/J Input Power:  350W (Full Spectrum) / 10W (Far Red) Power Factor:  >=90% Fixture Dimensions/ 45"Lx44.6" Wx4.44" H  Mounting Height:  >= 6"  Above Canopy Lifetime:  > 54,000 hrs Warranty:  5 Years Standard Warranty Input Voltage:  Autosensing 100-277 V  Amp Draw:  12 0V /2.63A, 24 0V /1.34A, 277 V /1.2A Weight 23.62 lbs

Contact us for ordering information. Unlock a new level of savings with our premium quality factory-direct FGI Hortibest LED grow lights. Get great performance at prices that cut out the middle man. Shop and experience the Hortibest difference. Hortibest H6 Slimline 400W Veg LED Grow Light. Perfect for a 4' x 4' space, this veg light is AC daisy-chainable for easy installation. With a highly uniform PPFD value, it's ideal for vegetative growth, and the slim design means it won't take up too much space in your grow room.  Highlights: Fanless Design IP65 Water and dust resistant Dimmable: 0-10V Daisy Chain Dimming Daisy Chain AC Power Connection Samsung Full Spectrum and Osram Deep Red LED Diodes Input Voltage:120-277VAC Slim Internal Power Supply Design Uniform PPFD distribution over a 4'x4' area DLC listed  The Hortibest Octopus H6 will help your plants reach their full potential. With a sturdy, sleek internal driver design, and a range of adjustable settings, this grow light is sure to give your plants the boost they need to grow strong and healthy. The H6 is designed to completely cover a 4' wide tray with consistent light distribution, making it perfect for your indoor horticulture needs. With PPFD of 650 umols/ms, your plants will be getting the ideal amount of light for optimal growth. (At 12") .  Link to PDF spec sheet Tech Specs: DLC Listed: H3 400W 400 W 2.6 umols/j PPF 900 umols/ms Proprietary built in driver (enclosed in light rails) AC power pass through for AC Daisy Chain Dimensions: 42 x 142 x 2 inches Weight: 18Ibs  Built in pre-set dimming knob + on/off Dimming: 0-10V Daisy Chain. RJ-14 light to light cable included L90: > 50,000hrs Safety Certification: ETL  

The Hortibest Far Red & UV LED bar system supplements full spectrum LED grow lights with extended wavelengths of photosynthetic light.      View on  Youtube  Independently driven with 180 Watts of total power. (90 watts of UV 385 nm and 90 watts of Far Red 730nm energy.) Use as an outrigger suspended from existing LEDs from any brand. Two channel control using 0-10v. Trolmaster with an LMA-14 Adapter operating each channel. 110-277v capability. ships with a 120v plug. Can be adapted to 240-277v with accessory plugs. Very low amp draw allows these units to operate on the same 110v circuit as fans or other room devices. Does not need an operate on the main lighting circuits (unless desired). This allows for control over tactics like the Emerson Effect. Daisy chain two or many to add Far Red or UVA to your room. External Driver with variable voltage range: AC100- 277V 50/60Hz Recommended controller is our Hortibest Master Controller with three zone control. Full spectrum, Far Red, and UV independent channel control. Or any TrolMaster HCS Controllers.  37 inches by 2.1 inches by 1.1 inches per bar, with included expander rails to fit over must multi-bar LEDs on the market today. Net Weight: 7.28 lbs  0-10V dimming, UV and FR using our Master Controller  ETL listed Includes: US Standard AC plugs cord(vertical pins), 120V; Using M15 three pins self-locking plug; Black UL PVC wire; 16AWG; Length: 6’. Included.  T type AC connection cord, 277V; Using M15 three pins self-locking connector at each end; Black UL PVC wire; Length: 1.6 meters. Not included. RJ14 dimming connection cord, 28AWG; With RJ14 dimming connector at each end.   

The TLD-4, is a modular plug-and-play LED driver that is designed to operate a single 90-watt LED bar. Since the TLD-4 is a modular driver, it can be combined with additional TLD-4 drivers to create a complete lighting system that can fit into any size space, and provide up to 1400 umol of light. It features four spectrum control channels and can be connected to a TrolMaster HCS or TCS controller to allow for remote control and independent settings for each of the four channels. That provides the ability to have customized lighting spectrum and timing control. The TLD-4 works with the 4ft long TLB-1 or 5ft long TLB-2 LED light bars from ThinkGrow.

The ThinkGrow Model One LED System 4ft Inner Canopy LED Bar with built-in 120 Watt Driver, will revolutionize high-density indoor growing. When applying light to plants only from above the plants, leaves and sections of the plant below the top “canopy” of the plant suffer from low light levels. That is the exact problem the ICL-300 is designed to fix. The ICL-300 emits light in a 300 degree pattern so that when positioned below the canopy, the sections of the plant under the canopy can also get the light they need to produce higher quality and yields. By applying some light to the middle of the plant structure, the user can eliminate lower quality flower formation and replace it with healthy flowers. The modular design of the ICL-300 allows them to be used in all installations regardless of the shape or size of the growing area. When light is only applied from overhead lighting fixtures, it is often the case that the light does not reach the bottom of the canopy, leaving a lot of gains on the table. This is where the ICL-300 steps in and solves the problem. Equipped with a built-in driver and LED diodes covering 3 sides, the ICL-300 emits light in a 300-degree direction. When placed within the canopy, the lower sections of the plants can absorb light directly from the LED and can receive the much needed light they need to produce higher quality and quantity of yields. Additionally, by applying light to the middle of the plant structure, the user can eliminate lower-quality flower formation and replace it with healthy flowers. The modular design of the ICL-300 allows them to be used in all installations regardless of the shape or size of the growing area. The ThinkGrow LED Stand was specifically designed to be used with the ICL-300. With the use of the TSD-1, growers can easily place their ICL-300 lights within the canopy, as well as easily adjust the height of the lights. Additionally, this stand facilitates the task of daisy-chaining multiple ICL-300 grow lights. Thinkgrow ICL-300 Tech-Sheet Download Thinkgrow ICL-300 Install Guide Download Thinkgrow LMA-G tech sheet (required) Thinkgrow LMA-T tech sheet (required) Don’t forget to buy: power cord (for the voltage you are using) daisy chain connections (sold in different lengths).  

The FGI Dimming Controller provides control over one or many LEDs or 0-10V capeable ballasts. Designed to operate lighting over distances up to 100 feet, the FGI Dimming Controller features robust controls to manage your grow room environment. Connect the controller to an entire room and build sunrise, sunset scenarios to gently wake your plants and put them to bed as nature does in the wild. Or manage rooms and connect several Dimming Controllers to manage strain specific rows or vertical racks of LEDs. Automatically assists in room temperature control by dimming down lights if the temperature setting shows the room is too hot. Adjusts light levels back up when the room is within the setting you choose. Set on and off timers and program sunrise and sunset dimming to mimic natural sunlight and get the most out of your plants.  For use with; All 0-10V dimmable LEDs (see your driver specifications) Not for use with our FGI Hortibest Commercial Series LEDs. Please view the Hortibest Master Controller.   All 0-10V controllable lighting (may require custom wiring - or TrolMaster ECS cable kits which can be used universally.) Control one or many lights.  Programmable Sunrise and Sunset Mode. System over temperature protection built in to protect your plants from accidental overheating in your grow space programming auto-dimming to reduce heat output. Attractive and easy to use touchscreen programming. 110V powered with battery backup. This unit is powerful enough to connect properly daisy chained units up to 30 meters from the control module.   Q&A: Is this Controller an On/Off switch? Not with the V1 version however yes with our new V2 version which will dim the Uniformity Pro 320 and Uniformity Pro 640 to off. This controller can be used with LED drivers which have the ability to dim to zero to turn your light off. It will not eliminate power to the light. It will however turn off the diodes if your driver has dim to zero capability.   Can the FGI Dimming Controller operate non-FGI LEDs? Yes, it can operate any LED that has a driver (power supply) that allows zero to ten volt dimming (0-10V). Consult the specifications of your LED light, or the specifications of the driver/power supply in the light itself. Most drivers have labels affixed to them that indicate their ability to do 0-10V dimming. How can I tell if my driver is 0-10V? 1. Look at the specifications for the model number of the driver, usually printed on a label on the driver. 2. Look for an indication on the label that the driver is 0-10V dimmable. 3. Look for a pair of wires on the driver/power supply that are NOT used to provide power to the light. Typically these are blue/black but can be a variety of colors based on the manufacturer. Can I connect the FGI Dimming Controller directly to the line voltage power on the light? No. Do not connect the Controller directly to line voltage power in your LED. It will damage the controller and void the return. Can this controller turn my LED totally off? Yes for the FGI Uniformity Pro series LEDs. No, it cannot dim the FGI Lightpanel or Lightbar products to off. For non FGI LEDs it depends on the driver/power supply. Consult the specifications for your driver. If the driver has the ability to "Dim To Off", then it is likely but not 100% that our Controller can dim your lights to off. Otherwise they will dim to 10% of the total light output only. Can I connect many lights to one controller? And if so how many? This depends on the distance you are trying to connect your lights over and the quality of the wire you use. We recommend insulated AWG 14 2 lead wire sold here on Amazon. And we also recommend you use IP68 twist connectors also sold here on Amazon to create a water proof, dust proof daisy chain. 3 way IP68 T connectors are ideal for this application. Product Manual Download Warranty: 24 months for manufacturing defects. 

5' LED Bar with 4x Spectrum Channels (White+ Deep Red+ Far Red+ UV) for Model One LED System, TLB-2, is an advanced 5' LED light bar that features four spectrum channels, including full spectrum , deep red, far red, and UV. When connected to a TrolMaster controller, the TLB-2 can replicate natural sunlight properties by allowing the user to adjust the actual light spectrum. This empowers growers to customize the desired light recipe for their plants, taking advantage of the four separately controllable spectrum channels. Each TLB-1 provides 90 watts of light

4' LED Bar with 4x Spectrum Channels (White+ Deep Red+ Far Red+ UV) for Model One LED System, TLB-1, is an advanced 4' LED light bar that includes four spectrum channels, including full spectrum , deep red, far red, and UV. When connected to a TrolMaster controller, the TLB-1 can replicate natural sunlight properties by allowing the user to adjust the actual light spectrum. Each TLB-1 provides 90 watts of light , effectively meeting the needs of ALL phases from vegetative to flowering.

4' LED Bar with 2x Spectrum Channels (Full Spectrum + Far Red) for Model One LED System, the FR-1, is a standard 4’ LED light bar that incorporates two spectrum channels, full spectrum and far red. When connected to a TrolMaster controller, it effectively covers essential growth stages from vegetative to flowering. By providing targeted far-red light to the crop at specific times, you can manipulate plant responses, accelerate flowering, and increase overall yield.

The TLD-2, is a modular plug-and-play LED driver that is designed to operate a single 90-watt LED bar. Since the TLD-2 is a modular driver, it can be combined with additional TLD-2 drivers to create a complete lighting system that can fit into any size space, and provide up to 1400 umol of light. It features two spectrum control channels and can be connected to a TrolMaster Hydro-X or Tent-X system controller to allow remote control and independent settings for each of the two channels. That provides the ability to have customized lighting spectrum and timing control. The TLD-2 works with the FR-1, DR-1 or UV-1 LED light bars from ThinkGrow.

4' LED Bar with 2x Spectrum Channels (Full Spectrum + Deep Red) for Model One System , the DR-1, is a standard 4’ LED light bar that features full spectrum and deep red spectrum channels. It can be connected to a TrolMaster controller, allowing growers to select from a range of spectrum recipes for different crops and growth stages. This flexibility can be achieved through the on-board dimming knob or compatible controllers.

Buy your next SOLUS from the largest AROYA distributor in the US. Use our promo code to save today.  Yield. Quality. You always want more. If you’re a serious grower — even at home – you’re never not ready for big data and analytics. To grow better, you must first know better, and there’s no tool like SOLUS to mine your substrate for insights and help your harvest flourish. Use the SOLUS for easy and quick spot measurements of your substrate, no datalogging required and no information is retained. Water. Temp. EC. All impact the quality and yield of your crop. To level up your home growing requires precision at every stage, across every variable. With SOLUS, you’re in control of it all. Reap a harvest full of insights right on your phone. Simple to download, and even simpler to detect your sensor.  Learn About EC  Mine the insights buried in your substrate The SOLUS Sensor Kit combines the industry’s top soil sensor with a wireless analysis powerhouse. Together with the free SOLUS by AROYA app, they enable high-precision water content, temperature and electrical conductivity spot checks. The information SOLUS gathers helps growers maximize their substrate and unlock maximum yield potential. Learn more about the Solus on our YouTube Channel here:  Quality Legendary sensor technology The product of more than 20 years of soil moisture research and technological refinement, the TEROS 12 sensor is trusted by scientists, farmers and growers alike. The TEROS 12’s ruggedized body lasts ten years or more. Its stainless-steel sensor needles slide easily into any substrate. It even ships with a free reusable sensor installation tool to help growers align the sensor perfectly for consistent, accurate measurements. INCLUDES One TEROS 12 Sensor  One ZSC Handheld Bluetooth Module For App Connectivity APP Download - search AROYA SOLUS on the Apple or Android App stores FEATURES Quick and easy WC, EC and temp spot-checks Secure – won’t store data or monitor measurements over time Wirelessly pairs with any iOS or Android mobile device using Bluetooth Easy installation with installation tool Steel needles cut through the soil for better soil-sensor contact Robust, epoxy body for tough field conditions Dependable, long-life sensor Large volume of influence Ferrite core eliminates cable noise Device Operating System Compatibility and System Requirements The mobile device must be capable of using Bluetooth® Low Energy (BLE). The mobile device operating system compatibility is Apple iOS 10 or greater and Android OS 4.3 or greater. NOTE: Location services must be enabled to use the Bluetooth capabilities of the ZSC. This is a requirement set by the Android operating system (OS). Aroya Solus Manual and Guides Downloads TEROS 12 Operation Manual Download Link  Aroya Solus Quickstart guide Aroya Solus Troubleshooting guide  Aroya ZCS Module Quickstart guide

Elevate Your Plant Growth The FGI Far Red LED Grow Light is a top-tier solution designed to significantly enhance plant growth by delivering 730nm far red energy, which is crucial for optimal photosynthesis. Unlike cheaper 660nm red LEDs, which fail to produce this specific wavelength, the FGI light effectively stimulates growth processes that are otherwise neglected. Its robust, commercial-grade construction guarantees exceptional durability and consistent performance, making it the 730nm choice for both amateur and professional growers seeking to maximize their yields and improve plant health. Scientific Benefits Far-red light (700-760nm) is crucial for optimal plant growth, enhancing photosynthesis and increasing plant size. Studies, such as those from the University of Texas, show that “far-red light boosts overall plant mass and terpene profiles. It improves light absorption, influences leaf angle, and promotes higher yields.”  Read the study here. Far Red light is believed to create a competitive response in plants, pushing desirable terpene production and assisting in the formation of trichomes.   The Emerson Effect Using far-red light just before nighttime increases photosynthesis, cell division, and growth. Implementing a 10-15 minute far-red light cycle after full spectrum lights are off can optimize your growing environment. Recommended Use Ideal for 4x4 grow spaces, this light is easy to install with included hardware, ensuring full coverage and enhanced PPFD delivery. Controls With an low Amp draw at .3 amps, we recommend these units are operated on standard 110V receptacles. One dedicated 15 amp circuit can safely operate more than 30 units. Standard service outlets for fans can easily be used to operate as many units as needed. Standard wall timers can serve as on/off, or they can be connected to Smart plugs, or TrolMaster 4RS-1 Outlet Expansion Module.   Customer Reviews John D.:  “My plants have never been healthier. The far-red light truly makes a difference." Sarah P.: Excellent quality! This light has transformed my growing setup." Far Red Spectrum ~Technical Specs~ Power: 30W Amps: .3 @110V, .14 @ 220V PPF: 72.1 umols/s Voltage; 100-277VAC, 50/60 Hz Size: 44.88” x 2.24” x 1.53” Weight: 4.4 lbs   IP65: water resistant sealed case    Photometric Test Report Download  Product Warranty (see our warranty here) 3 year warranty

The Hydro-X modular system is easy to install and expand, and can be fully customized to your needs. With the free TrolMaster App, you can access all system settings and alerts from anywhere, anytime. The Hydro-X system is compatible with most grow lights brands, HVAC systems, mini-split air conditioners, commercial dehumidifiers and humidifiers, as well as CO2 generators or regulators. So whether you're looking to maintain optimal growing conditions in your indoor garden the Hydro-X system has you covered. Includes the 3 in 1 sensor bundle and RJ12/16 cables. A turn-key environmental sensor system to tune up your gardens success.  This controller is as user friendly as it gets, and installing and setting it up is simple. It's compatible with just about every major grow light, HVAC system, dehumidifier/humidifier, and even CO2 system. You can use the free TrolMaster app, and achieve complete control of your grow room remotely, freeing you from the grow room and getting you back to doing the things you enjoy. What's Included With The Hydro-X System: Hydro-X Environment Controller (x1) 3-in-1 Sensor for Temperature, Light, and Humidity (x1) RJ12 Cable Set (x1) Male-to-Male 16ft RJ12 Cable (x1) Male-to-Male 4ft RJ12 Cable (x1) RJ12 T-Splitter (x1) Achieve Complete Grow Room Control With The Hydro-X With one piece of equipment, you can essentially control anything you need in your grow room. There are more than 17 separate types of control modules, granting you the ability to connect the Hydro-X to A/C's and HVAC  To put it simply, the TrolMaster Hydro-X Environment Controller With 3-in-1 Sensor is the most intelligent and versatile system on the market.  The Hydro-X System Features A Modular Design Another great feature of the Hydro-X Environment Control System is that you can control and customize every last detail of the controller. The modular design means you can configure the separate components in unique ways to create the best environment for your plants because every grow is different. You can control up to 512 different grow lights on two separate channels, and operate different systems simultaneously. Just about every lighting brand and product on the market is compatible with the Hydro-X with different adapters. LMA-11 for Phantom - Lighting Adapter P LMA-12 for Dimlux - Lighting Adapter D LMA-13 for Sun System - Lighting Adapter S LMA-14 Lighting Adapter F for most brands and also FGI brand LEDs LMA-15 for DLI - Lighting Adapter DLI LMA-T for ThinkGrow - Lantern Schedule Adapter F The LMA-14 Adapter can be used for 24 Drivers (LEDs) or 40 Ballasts with either the HCS-1 or HCS-2 Hydro-X controllers. Both the Hydro-X Controllers have 2 line lights giving the ability to control double the amount of each type of light (48 LEDs and 80 Ballasts).  

The LMA-14 lighting adapter is specially designed to control a wide variety of lighting systems including FGI brand LEDs and HIDs. TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option. 

Affordable, compact, extended far red spectrum LED grow light for plants of all types.    Growing tomatoe starts with the FGI Square 2   The FGI Square 2 is an excellent entry level LED grow light for those looking to give their plants the sun's energy. Unlike other lights on today’s market that only provide certain colors needed by plant life (or lack thereof), this one provides all the necessary components: red, orange, yellow green and blue spectrum which together make up the building blocks for successful photosynthesis (and closely matches our sun).  If you are looking for an easy to use LED to learn how to grow any plant types indoors, look no further than the FGI Square 2. Well loved by gardeners everywhere. Designed in the USA by Forever Green Indoors in Seattle WA. Plant lighting LED light experts since 2013. Use the Square 2 to grow all types of plants. Placing the light closer to the plants provides enough energy to match the summer sun. Pulling the light further away, or using the built in dimming, provides the right energy for starts and seedlings.  Learn more about the FGI Square 2 on our YouTube Channel here:  The Square 2 is one of the more efficient grow lights on today's market, using only 220 watts! This means it can produce far less heat than higher wattage lamps. We designed it to deliver the perfect balance of light. It's full spectrum white LEDs help plants grow healthy while adding 5% total deep as well as far-red diodes for an extended range that will optimize your plant growth! Key Features:  Compact size: 20" x 20" x 3" Lightweight: 10 lbs  Built in dimming knob: Adjusts levels for young to mature plants.  Spectrum: Full spectrum plus 5% 660nm deep red plust 730nm far red LED diodes.  Includes: 110V power cord. Two clip and steel cable wire hangars. Product manual.    Technical  PAR Chart at 24" From Diodes The right kind of light can make all the difference for your plants. Flowers, fruits and other high energy use types require levels as high as 1000 PPFD - a measurement that approximates natural sunlight. Spectrum From Our Sun   We design grow lights to closely mimic natural sunlight (shown above). Although it's not possible to exactly duplicate a giant burning ball of hydrogen, we get as close as possible with the Square 2.   Spectrum from the Square 2     Don't wait! We have limited stock on this LED. Buy yours today.     ~Technical Specs~ProductDiodes (White) Brand name: Shenzhen LidedaNumber of pieces 360Total Diode Wattage Capacity (not actual draw) 300WMaximum Advertised Wattage 300Equivalent Wattage 1000CCT 4000KCRI 80CRIOther color Diodes (Red)Brand Name: Shenzhen LidedaNumber of pieces 96CCT NAWavelength 655-665nmOther color Diodes (FR) Brand Name: Shenzhen LidedaNumber of pieces 24CCT NAWavelength 730-745nmRatio mix white/red (%) 3:1Projected Diode Lifetime (L-90) - in hours 50,000 hoursPhotosynthetic Light Measurements PPF Output* 436.1 umol/sPPF Efficacy* PPF 2.1umol/J PPFD Output 900 umols/ms at 24" below diodesPhotopic Light MeasurementsLuminous Flux* 30342lmLuminous Flux Efficacy 151.7lm/wOther Input Power Watts 218Input Voltage 110VCord length 8' (2.44m, 18AWG )Plug type (note if bare whip) Molded 110VProduct Dimensions Dimensions W x L x H (inches) 20x20x3.5Weight (pounds) 10Operating Temp range (F) -20℃ — +40℃IP rating (UL-ETL or estimated final UL-ETL)IP（UL- UL-ETL） IP20Physical Dimensions Package Dimension W x L x H (inches) 24x23x5Inner carton (Yes/No) NOInner Carton Weight NOMaster Outer carton (Yes/No) YESNumber of pieces in Master Carton (1, 2, 3) 1Master carton weight (lbs) 2Dimming / Tuning Dimming (Yes/No) YesProduct Warranty (against manufacturing defects) 3 years Warranty does not include coverage for damage caused by water or exposure to VOC's or electrical damage caused by voltage spikes. We recommend using a basic power surge suppressor such as those found on power strips to protect your light from utility power outages. 

The FGI Dimming Controller provides control over one or many LEDs or 0-10V capeable ballasts. Designed to operate lighting over distances up to 100 feet, the FGI Dimming Controller features robust controls to manage your grow room environment. Connect the controller to an entire room and build sunrise, sunset scenarios to gently wake your plants and put them to bed as nature does in the wild. Or manage rooms and connect several Dimming Controllers to manage strain specific rows or vertical racks of LEDs. Automatically assists in room temperature control by dimming down lights if the temperature setting shows the room is too hot. Adjusts light levels back up when the room is within the setting you choose. Set on and off timers and program sunrise and sunset dimming to mimic natural sunlight and get the most out of your plants.  For use with; All 0-10V dimmable LEDs (see your driver specifications) Not for use with our FGI Hortibest Commercial Series LEDs. Please view the Hortibest Master Controller.   All 0-10V controllable lighting (may require custom wiring - or TrolMaster ECS cable kits which can be used universally.) Control one or many lights.  Programmable Sunrise and Sunset Mode. System over temperature protection built in to protect your plants from accidental overheating in your grow space programming auto-dimming to reduce heat output. Attractive and easy to use touchscreen programming. 110V powered with battery backup. This unit is powerful enough to connect properly daisy chained units up to 30 meters from the control module.   Q&A: Is this Controller an On/Off switch? Not with the V1 version however yes with our new V2 version which will dim the Uniformity Pro 320 and Uniformity Pro 640 to off. This controller can be used with LED drivers which have the ability to dim to zero to turn your light off. It will not eliminate power to the light. It will however turn off the diodes if your driver has dim to zero capability.   Can the FGI Dimming Controller operate non-FGI LEDs? Yes, it can operate any LED that has a driver (power supply) that allows zero to ten volt dimming (0-10V). Consult the specifications of your LED light, or the specifications of the driver/power supply in the light itself. Most drivers have labels affixed to them that indicate their ability to do 0-10V dimming. How can I tell if my driver is 0-10V? 1. Look at the specifications for the model number of the driver, usually printed on a label on the driver. 2. Look for an indication on the label that the driver is 0-10V dimmable. 3. Look for a pair of wires on the driver/power supply that are NOT used to provide power to the light. Typically these are blue/black but can be a variety of colors based on the manufacturer. Can I connect the FGI Dimming Controller directly to the line voltage power on the light? No. Do not connect the Controller directly to line voltage power in your LED. It will damage the controller and void the return. Can this controller turn my LED totally off? Yes for the FGI Uniformity Pro series LEDs. No, it cannot dim the FGI Lightpanel or Lightbar products to off. For non FGI LEDs it depends on the driver/power supply. Consult the specifications for your driver. If the driver has the ability to "Dim To Off", then it is likely but not 100% that our Controller can dim your lights to off. Otherwise they will dim to 10% of the total light output only. Can I connect many lights to one controller? And if so how many? This depends on the distance you are trying to connect your lights over and the quality of the wire you use. We recommend insulated AWG 14 2 lead wire sold here on Amazon. And we also recommend you use IP68 twist connectors also sold here on Amazon to create a water proof, dust proof daisy chain. 3 way IP68 T connectors are ideal for this application. Product Manual Download Warranty: 24 months for manufacturing defects. 

Description The optional CO2 Sensor (MBS-S8) measures the CO2 PPM within the growing area. Using the MBS-S8 allows the users to connect and control their supplemental CO2 system using the Hydro-X. *Used in combination with one or more DSC-1 CO2 device modules.

  LED Power Indicator RJ12 Cable Socket Addressing Plug & Play The TrolMaster DSH-1 Humidity control / device modules allow user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. The DSH modules are rated at 10-amps. *Use with dehumidifiers less than 7 amps to avoid current overload. Package Contents:  1 x Device Station 1 x 16ft RJ12 Cable 1 x 4ft RJ12 Cable 1 x RJ12 T-Splitter Specifications: Input Voltage: 100~240 VAC, 50/60Hz Output Current: 10A Output Voltage: 100~240 VAC, 50/60Hz Working Environments: Temperature 32-122°F, Humidity=90% Package Dimensions: 3.3(L) x 3(W) x 3.5(H) in G.W. per pack: 12 oz 

This precise meter provides scientifically accurate Photosynthetic Active Radiation (PAR) light readings under any light source, including LED. And with the purchase of the optional wand, you can get even more accurate readings. Accurate PPFD Light Readings From Any Light Source: Full sun to full shade indoors or outdoors. Artificial light sources (LED, High Pressure Sodium, Metal Halide, Florescent, Halogen…). Three Modes Of Operation: Instant Spot Measurement mode for PAR light readings. Scan mode for quickly averaging PAR over an area. DLI mode shows Daily Light Integral on the LCD (no computer needed). Compares to Apogee Instruments Spectral Reading Range  Additional Benefits/Features Compact and easy to use Water and impact resistant Integral mounting plate acts as a stand, or can be used as a stake. Also includes lanyard or hanger hole for suspending the meter, and magnet mounts. 1/4-20 threaded hole for mounting on tripod or extension wands, selfie sticks. Includes and sensor cover and soft carry pouch. Learn more about the SpotOn PAR Meter on our YouTube Channel here: QUANTUM PAR LIGHT METER SPECS:Range:PAR LIGHT: 0.0 to 6,500 μmol m-2 s-1DLI (Daily Light Integral): 0.0 to 560.0 moles m-2 day-1Display Resolution:PAR LIGHT: 0.1 μmol m-2 s-1 from 0.0 to 99.91 μmol m-2 s-1 from 100 to 6,500DLI: 0.1 moles m-2 day-1Accuracy: +/- 5% (each meter is calibrated to a NIST traceable light sensor on a broad-spectrum light source)Azimuth Error: +/- 1% over 360°Daily Light Integral (DLI): Calculated continuously from light readings every 3 minutesWater Resistant: IP-65 rated for use in rain, irrigation, and condensing environments (do not submerge)Operating Environment: 32-130°F(0-55°C) with 0-100% RH condensing okBattery: CR2032 3v coin cell lithium included (2-year battery life)Size & Weight: 1.75in(4.5cm)W x 5.75in(14.6cm)L x .85in(1.8cm)D0.17lb(77g)

This highly precise meter provides scientifically accurate Photosynthetic Active Radiation (PAR) light readings under any light source, including LED. And with the purchase of the optional wand, you can get even more accurate readings.Accurate PPFD Light Readings From Any Light Source: Full sun to full shade indoors or outdoors. Artificial light sources (LED, High Pressure Sodium, Metal Halide, Florescent, Halogen…). Three Modes Of Operation: Instant Spot Measurement mode for PAR light readings. Scan mode for quickly averaging PAR over an area. DLI mode shows Daily Light Integral on the LCD (no computer needed). Compares to Apogee Instruments Spectral Reading Range  Additional Benefits/Features 32" 3 piece extension wand included  Compact and easy to use Water and impact resistant Integral mounting plate acts as a stand, or can be used as a stake. Also includes lanyard or hanger hole for suspending the meter, and magnet mounts. 1/4-20 threaded hole for mounting on tripod or extension wands, selfie sticks. Includes and sensor cover and soft carry pouch.Learn more about the SpotOn PAR Meter on our YouTube Channel here: ~Technical Specs~QUANTUM PAR LIGHT METER SPECS:Range:PAR LIGHT: 0.0 to 6,500 μmol m-2 s-1DLI (Daily Light Integral): 0.0 to 560.0 moles m-2 day-1Display Resolution:PAR LIGHT: 0.1 μmol m-2 s-1 from 0.0 to 99.91 μmol m-2 s-1 from 100 to 6,500DLI: 0.1 moles m-2 day-1Accuracy: +/- 5% (each meter is calibrated to a NIST traceable light sensor on a broad-spectrum light source)Azimuth Error: +/- 1% over 360°Daily Light Integral (DLI): Calculated continuously from light readings every 3 minutesWater Resistant: IP-65 rated for use in rain, irrigation, and condensing environments (do not submerge)Operating Environment: 32-130°F(0-55°C) with 0-100% RH condensing okBattery: CR2032 3v coin cell lithium included (2-year battery life)Size & Weight: 1.75in(4.5cm)W x 5.75in(14.6cm)L x .85in(1.8cm)D0.17lb(77g)

SpotOn Paper is water sensitive paper to quickly and easily assess your spray coverage. The yellow paper turns blue to allow for quick and easy spray visualization: visualize spray coverage, visualize droplet size and uniformity and visualize off target application. For use with crop spraying to ensure correct application of chemicals, reduce overspray and waste and ensure the correct amounts are applied.  Pack of 25 2" x 3" sheets Does Not Warp In Humid Conditions Economical Alternative To Other Products On The Market Unique Fully Sealed Package Provides Re-Closable Seal Once Opened In House Proprietary Production Process Is Tightly Controlled Includes Tweezer And Desiccant Packet To Improve Shelf Life Comparing three brands of water sensitive paper - Jason Deveau 

The SpotOn Extension wand for reaching further in to plant canopy to take readings with the SpotOn PAR meter. (SpotOn PAR meter sold separately)  Our rugged three piece steel extension wand can stand up to the harsh conditions of grow rooms. Threaded connections ensure the PAR meter will not twist when fully extended. The rubber handle grip helps keep a solid grip on your meter even with wet hands.  Our large LED screen is easy to read, even in brightly lit rooms at a distance of 3' from the meter. 

About SpotOn Paper is water sensitive paper to quickly and easily assess your spray coverage. The yellow paper turns blue to allow for quick and easy spray visualization: visualize spray coverage, visualize droplet size and uniformity and visualize off target application. For use with crop spraying to ensure correct application of chemicals, reduce overspray and waste and ensure the correct amounts are applied.  Pack of 50 1" x 3" sheets Does Not Warp In Humid Conditions Economical Alternative To Other Products On The Market Unique Fully Sealed Package Provides Re-Closable Seal Once Opened In House Proprietary Production Process Is Tightly Controlled Includes Tweezer And Desiccant Packet To Improve Shelf Life Comparing three brands of water sensitive paper - Jason Deveau

2.25GPM with Tip Wear Indication provides important information about worn sprayer nozzles Quick and accurate flow rate checking of individual sprayer nozzles. This model is best for flow rates below 2.25 GPM typical of herbicide and insecticide application. Our SC-5 model is best for flow rates up to 5 GPM. FEATURES: NO CALCULATIONS OR APP DOWNLOAD REQUIRED: Automatically calculates and displays tip flow rate in GPM, LPM, oz/min, tip wear in %, and application rate in GPA/LPH (just enter your speed and nozzle spacing).FAST AND SIMPLE OPERATION: Readings in about 10 seconds per tip.QUICKLY FIND WORN SPRAY NOZZLE TIPS: Industry guidelines recommend tip replacement once flow rate exceeds that of the new tip by 10%.ACCURATELY MEASURE TRUE TIP FLOW RATE: Today’s high-tech sprayers can only be properly calibrated and confirmed with this knowledge. SPRAYER CALIBRATOR MODEL SC-2 SPECS: Range & Units: 0.02 – 2.25 GPM, 0.08 – 8.52 LPM, 3 – 288 oz/min (GPM in US Gallons) Accuracy: +/- 2% or 1 Digit Resolution: 0.01 GPM, 0.01 L/min, 1 oz/min Fluid Compatibility: Water & Water Based Solutions Only Battery: CR2032 Included (3 Year Battery Life) Size: 3” (7.6 cm) Dia x 8.75” (22 cm) Tall Weight: 0.6 lbs (272 g)

Quickly and accurately check water flow from nozzles, faucets, sprayers, and showers up to 5 GPM. Features: Provides High-Resolution Digital Flow Rate Display Within Seconds Collapsible 4.25in(10.8cm) Dia. Rubber Collection Funnel For Shower Heads Fits Under Faucets With As Little As 7.5in(19cm) Clearance Height Internal Diffuser Pad Controls Strong Nozzle Spray Simple Rugged Design Has No Moving Parts Self-Contained For One-Handed Operation     SC-5 UNIVERSAL FLOW METER SPECS: Range: 0.08-5.00GPM, 0.30-19.00LPM, 2-1140L/hr Accuracy: Greater of +/- 3% or 1 Least Significant Digit Resolution: 0.01GPM, 0.01LPM, 1L/hr Fluid Compatibility: Water & Water Based Solutions Only Battery: CR2032 Lithium Coin Cell (2-3 Year Battery Life) Size: 4.5in(11.4cm)W x 5in(12.7cm)L x 7.5in(19cm)Tall – 9in(23cm)Tall with funnel extended Weight: 0.7 lbs(0.3kg)

SpotOn® Paper is water sensitive paper to quickly and easily assess your spray coverage. The yellow paper turns blue to allow for quick and easy spray visualization: visualize spray coverage, visualize droplet size and uniformity and visualize off target application. For use with crop spraying to ensure correct application of chemicals, reduce overspray and waste and ensure the correct amounts are applied.  Pack of 5 9.75 x 11.75. Also available in 1"x3" and 2"x3". sheets Does Not Warp In Humid Conditions Economical Alternative To Other Products On The Market Unique Fully Sealed Package Provides Re-Closable Seal Once Opened In House Proprietary Production Process Is Tightly Controlled Includes Tweezer And Desiccant Packet To Improve Shelf Life