
125-Volt 3-Wire Plug For FGI Grow Lights
$ 5.50
$ 5.50
Our recommended 110V accessory plug. Easy to install.

FGI FlexiClone 25w Pair Of LED Grow Lights 4x2 For Growing Cuttings & Seedlings & Starts
$ 99.95
$ 129.00
Quality Made LED Lighting For Healthy Clones and Starts
Overview
Introducing our new FGI Flexi-Clone LEDs. Each set is linkable to a single 110V connection (220V optional with an accessory plug installed). Daisy chain up to 60 bars to run your entire plant propagation area.
We've designed this light to provide perfect light intensity and an ideal spectrum for growing cuttings and clones.
Competitive
Compare to other plastic clone/seedling lights and you'll see why people choose the flexi-clone system instead. At Forever Green we design lights here in the USA based on feedback from experienced growers. Each design is tested in actual commercial grow facilities to ensure the work great. The FlexiClone system is awesome. Your plants will love this light.
Description
Our new 25 watt LED grow light set is ideal for clones and young veg plants. Each bar covers a 4' long by 12" wide area at 12-15" from the top of the plants/seedlings.
Sold as as set of two bars, use two of the Flexi-clone bars to cover 4' long shelves and up to 24" of width.
Benefits
Using our tried a true light spectrum recipe, we use neutral white and cool white diodes to create the ideal environment for young plants.
Daisy chain up to 30 Flexi-clone bars on a single 110V plug in (or optionally remove the 110V plug and instead use 220V power and daisy chain up to 60 bars).
Unboxing and Installation Video
~Technical Specs~
Product
FGI Flexi Clone LED Grow Light (set of two)
Light Source
LED
Spectrum
4506 CCT Warm White / Neutral White mixPhotosynthetic Light MeasurementsPPF Output*
69 umols/ms
PPF Efficacy*
2.30 Umol/sec/wPPFD @ 12"
115 Umol/m²/sFixture coverage ( max intensity / max uniformity )*
4' x 1' per LED / 4' x 2' per set of two LEDsPhotopic Light MeasurementsLuminous Flux*
8,229 LumensLuminous Flux Efficacy*
136.2 Lm/wIlluminance @ 12"
32,069 LuxOtherInput Power
25 watts Input Voltage
100-277VAC autosensingDimensions
47.2”x 1.89”x 1.3”Weight
1.1 lbsOperating Temp range
32 F - 104 FThermal Management
PassiveRecommended Mounting height
12"
Dimming / Tuning
No
Product Warranty (see our warranty here)
5 years

FGI Flexiclone LED Power Cord
$ 12.95
$ 12.95
110V power cord for operating the FGI Flexiclone LED bars individually. One cord comes with every set of two Flexiclone LEDs. This cord allows for separate operation of each LED bar.

FGI Trolmaster Adapter Cable For Uniformity Pro Series LEDs
$ 29.00
$ 35.00
The FGI Trolmaster Custom Cable allows for connection between Trolmaster Hydro-X and Hydro-X Pro (also requires the Trolmaster Lighting Adapter F). Use together with multiple Uniformity Pro's which comes with our light-to-light 0-10V dimming connection cable. (Included with each Uniformity Pro).

Hydro-X LMA-12 Lighting Control Adaptor D (to control Dimlux Ballast)
$ 55.95
$ 68.00
TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.
This Lighting Control Adapter D (LMA-12) is specially designed for controlling D ballast.

Set of 10 SpotOn 4 in 1 Sprayer Tip Tools For Cleaning and Maintaining Sprayer Nozzles. Pack of 10.
$ 32.95
$ 39.95
4 in 1 Tip Tool includes a brush, foldout plastic pick, spanner wrench and utility hook that makes cleaning and repairing sprayer nozzles a breeze.
Ships as a package of 10 tips tools.

SpotOn 1x3in Water Sensitive Paper, 50 Sheets For Assessing Spray Uniformity
$ 24.95
$ 29.95
About
SpotOn® Paper is water sensitive paper to quickly and easily assess your spray coverage. The yellow paper turns blue to allow for quick and easy spray visualization: visualize spray coverage, visualize droplet size and uniformity and visualize off target application.
For use with crop spraying to ensure correct application of chemicals, reduce overspray and waste and ensure the correct amounts are applied.
Pack of 50 1" x 3" sheets
Does Not Warp In Humid Conditions
Economical Alternative To Other Products On The Market
Unique Fully Sealed Package Provides Re-Closable Seal Once Opened
In House Proprietary Production Process Is Tightly Controlled
Includes Tweezer And Desiccant Packet To Improve Shelf Life

SpotOn 2x3in Water Sensitive Paper, 25 Sheets For Assessing Spray Uniformity
$ 24.95
$ 29.95
About
SpotOn® Paper is water sensitive paper to quickly and easily assess your spray coverage. The yellow paper turns blue to allow for quick and easy spray visualization: visualize spray coverage, visualize droplet size and uniformity and visualize off target application.
For use with crop spraying to ensure correct application of chemicals, reduce overspray and waste and ensure the correct amounts are applied.
Pack of 25 2" x 3" sheets
Does Not Warp In Humid Conditions
Economical Alternative To Other Products On The Market
Unique Fully Sealed Package Provides Re-Closable Seal Once Opened
In House Proprietary Production Process Is Tightly Controlled
Includes Tweezer And Desiccant Packet To Improve Shelf Life

SpotOn Quantum Par Meter Extension Wand
$ 55.00
$ 75.00
The SpotOn Extension wand for reaching further in to plant canopy to take readings with the SpotOn PAR meter. (SpotOn PAR meter sold separately)
Our rugged three piece steel extension wand can stand up to the harsh conditions of grow rooms. Threaded connections ensure the PAR meter will not twist when fully extended.
The rubber handle grip helps keep a solid grip on your meter even with wet hands.
Our large LED screen is easy to read, even in brightly lit rooms at a distance of 3' from the meter.
Sneak Peak at the new SpotOn Extension Wand in action

Trolmaster ARS-1 AC Remote Station
$ 94.75
$ 105.00
The ARS-1 mini-split air conditioner controller is a unique product that solves the age-old problem of having separate day and night temperature settings on your mini-split air conditioners. The ARS-1 is a universal controller that works with most mini-split air conditioners (and some window-type AC units too), as long as the unit came with an IR / infrared remote controller. We use the remote control that came with the unit to “teach” those IR signals to the ARS-1 module. Once the ARS-1 “learns” those remote control codes, the ARS-1 will send those same signals to the indoor mini-split head unit changing the setpoint to the desired Day or Night temperature setting automatically base on the photocell sensor status.

Trolmaster DCC-1 Dual Condition Adaptor for Hydro-X system
$ 66.50
$ 70.00
The TrolMaster DCC-1 provides a simple solution to control a single device, with more than one condition. For example, people like to turn on their exhaust fans when either temp or humidity is too high; shut off CO2 when turn on exhaust fans. There are many other examples where two conditions can be either combined or split.
The DCC-1 is designed to be used in combination with one of TrolMaster’s plug-in style module. (DSC-1, DSH-1/2, DST-1/2 and DSP-1). Once connected to the plug-in module using the RJ12 cable built-into the DCC-1, the DCC-1 will act in concert with that plug-in module to control whatever device is connected to the plug-in module. The DCC-1 can also be set to work in two distinct ways using the “Interlock” function.INTERLOCK OFF: When the DCC-1 interlock is set to be off, EITHER condition that are associated with that pair of modules that are being used together can be activated individually for the device to be activated. (modules used in “parallel”)Examples from above for interlock OFF would be: Turn on an exhaust fan to reduce temp or humidity.Turn on an exhaust fan at night using a recycling timer OR when Humidity is too highINTERLOCK ON: When the DCC-1 Interlock is selected to be on, BOTH conditions that are associated with that pair of modules that are being used together must be activated TOGETHER in order for the device to be activated. (modules used in “series”)Examples from above for interlock ON would be: Shut off a CO2 device when an exhaust fan is runningShut off lights if the temperature gets too warm within the area.

Trolmaster DSC-1 CO2 Device Station CO2 Control Relay Single Pack with cable set
$ 61.95
$ 65.00
The TrolMaster DSC-1 CO2 control / device module allows user the to easily connect and control standard supplemental CO2 devices or CO2 exhaust controls to the Hydro-x. Any CO2 device that is 10-amps @ 120 volts or less can be controlled by the DSC-1.

Trolmaster DSD-1 Dry Contact Station Single Pack with cable set
$ 66.50
$ 70.00
LCD Display, Easy Operation
Seamless Connection with Hydro-X
Multiple purposes assignment
Plug & Play
The Trolmaster DSD-1 Dry-contact module provides a simple and flexible solution to who want to connect & control devices to the Hydro-X using a “dry-contact” or relay to activate the device. Some equipment requires either normally open or normally closed contact closure in order to activate the equipment. The DSD-1 is the product that you need to control those types of devices.*
The DSD-1 can be configured to work as the other Trolmaster power modules work. The DSD-1 connects into the “devices” line on the Hydro-X and can be set to control an almost infinite number and types of devices such as:Lighting contactorsLight Deprivation curtainsPump contactorsTemperature devicesHumidity devicesCO2 devices* Consult FGI or Trolmaster for questions concerning your particular device.
Package Includes:
1 x Dry Contact Station DSD-11 x 16ft RJ12 Cable1 x 4ft RJ12 Cable1 x RJ12 T-Splitter
Specifications:
Input Voltage: 100~240VAC, 50/60HzOutput Current: 10AOutput Voltage: 100~240VAC, 50/60HzWorking Environment: Temperature 32-122°F, Humidity=90%Packaging Dimensions: 85mm x 80mm x 90mm

Trolmaster DSH-1 Humidity Device Station
$ 61.99
$ 70.00
LED Power Indicator
RJ12 Cable Socket
Addressing
Plug & Play
The TrolMaster DSH-1 Humidity control / device modules allow user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. The DSH modules are rated at 10-amps. *Use with dehumidifiers less than 7 amps to avoid current overload.
Package Contents:
1 x Device Station
1 x 16ft RJ12 Cable
1 x 4ft RJ12 Cable
1 x RJ12 T-Splitter
Specifications:
Input Voltage: 100~240 VAC, 50/60Hz
Output Current: 10A
Output Voltage: 100~240 VAC, 50/60Hz
Working Environments: Temperature 32-122°F, Humidity=90%
Package Dimensions: 3.3(L) x 3(W) x 3.5(H) in
G.W. per pack: 12 oz

Trolmaster DSH-2 240V Humidity Device Station
$ 82.65
$ 87.00
The TrolMaster DSH-2 Humidity control / device modules (240V) allow the user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. The DSH modules are rated @ 10-amps. *Use with dehumidifiers less than 7 amps to avoid current overload.
LED Power Indicator
RJ12 Cable Socket
Addressing
Plug & Play

Trolmaster DSP-1 Program Device Station Timer
$ 69.25
$ 74.95
The TrolMaster DSP-1 program device module (timer module) works like a multi-function timer. The DSP-1 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x. Any device that is 10-amps at 120 volts or less can be controlled by the DSP-1.

Trolmaster DSP-2 240V Program Device Station
$ 89.65
$ 87.00
The TrolMaster DSP-2 program device module (timer module) works like a multi-function timer. The DSP-2 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x. Any device that is 10-amps at 240 volts or less can be controlled by the DSP-2.

Trolmaster DST-1 Hydro-X Temperature Device Station - Temperature Control Relay Single Pack with cable set
$ 66.50
$ 70.00
The TrolMaster DST-1 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps at 120 volts or less can be controlled by the DST-1.

Trolmaster DST-2 240V Temperature Device Station
$ 78.95
$ 83.00
The TrolMaster DST-2 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps @ 240 volts or less can be controlled by the DST-2.
Package Includes:
LED Power Indicator
RJ12 Cable Socket
Addressing
Plug & Play

Trolmaster DSV-1 Low Voltage Control Station
$ 69.25
$ 79.00
The Trolmaster DSV-1 is a low-voltage output module that can be used on the HCS-1, HCS-2 controllers. The DSV-1 can be addressed to be used as a temperature, humidity, CO2, or timer device module.Multiple voltage outputs are selectable by the user. The DSV-1 can output either 12 or 24 VDC up to .5 amps, or 12 or 24 VAC up to 4.8VA. Once the module is configured it will activate the low-volt device wired to the DSV-1.This allows the user to directly connect low voltage devices such as solenoids, valves, audio visual alarms or any other device that requires 12 to 24 volt AC or DC power to operate.

Trolmaster ECS-1 RJ12 Extension Cable Set
$ 19.00
$ 20.00
TrolMaster modules and sensors all come complete with a RJ12 16ft cable, Y-splitter and RJ12 4 ft cable to connect to the Hydro-x. When connecting modules that are farther apart, you can use the Extension cable set ECS-1. The ECS-1 comes complete with another 16ft cable, Y-splitter and 4 ft cable.
Package Includes:
1 x Male-to-Male 16ft RJ12 Cable
1 x Male-to-Male 4ft RJ12 Cable
1 x RJ12 T-Splitter